How is dental restoration done? Before Light-curing composite fillings After. What types of aesthetic restoration exist

Restoration- this is various methods restoration of destroyed molars, their functional and morphological features.

In such cases, they resort to artistic (synonymous with aesthetic, cosmetic) reconstruction, prosthetics or. Such procedures are performed using different materials, mainly composite filling agents ().

Thanks to the aesthetic restoration of the anterior teeth, it is possible:

To repair both one tooth and the entire dentition.
If available, in medicinal purposes select the tone and shape of the dentition.
Get rid of various pathologies on (cracks, spots, chips).
With inefficiency orthodontic treatment, you can correct the direction of the teeth.

Types of methods

AT modern dentistry There are only 2 types of aesthetic restoration of molars, but they fully meet the patient's expectations.

Distinguish:

Direct restoration of teeth (synonymous with composite restoration or with the help of light-cured (photopolymers and glass ionomers)).
Indirect restoration of teeth (performed using dental veneers).

Direct restoration of teeth

The specialist can perform the procedure in one day, but it may take several appointments. Only an orthopedic dentist is engaged in this kind of treatment.

The procedure is carried out using modern, high-quality composite materials. With this type of repair, all modeling and establishment processes take place in the human mouth.

Indirect dental restoration

before and after indirect dental restoration

This method is more complex and is carried out in 3 stages. From a molar prepared with oral cavity, make a cast. According to it, a veneer is made from the ceramic mass, which is attached to the tooth.

These processes take place in dental laboratory. A veneer is a type of micro-prosthesis that is made up of composites or ceramics. The thickness of such material is from 0.45 to 0.6 mm. Also, there is a very thin veneer, about 0.3 mm -.

It is used for the anterior surface and the cutting edge of the molar, which are the main part of the smile.

Pros and cons of both methods

Each of these methods has both its advantages and disadvantages.

Advantages of direct dental restoration:

Less interference with the fabric structure.
Less damage to tooth enamel.
Long service life of the seal.
Preservation nerve endings jaws.
Complete restoration of chewing function and aesthetics.
The procedure is painless.
Execution speed.
The ability to make adjustments to color or shape during staging.

Disadvantages of direct dental restoration:

Since all processes occur in the oral cavity, this brings a lot of inconvenience to the patient.
It is very difficult to re-establish good contact with neighboring molars, which is fraught with the development of infection and other defects.
Like the patient, the team of doctors experience inconvenience and can make mechanical mistakes.
There may be a slight change in color over time.

Advantages of indirect dental restoration:

It looks more aesthetically pleasing, as it imitates your own tooth.
Resistance to food additives and temperature change.
Very high material strength.
The color is more natural.
Possibility of bite correction.

Disadvantages of indirect dental restoration:

The main disadvantage is the multi-stage treatment process and takes a lot of time.
The structure is fragile.
It is necessary to grind the surface of the incisors and canines.
Replacement is required after a few years.

Restoration procedure

Direct artistic correction, the dentist-therapist performs in the oral cavity. For this method, doctors use a light-curing filling substance.

This, for example, can be a heliocomposite or a photocomposite. Enamel color is created and natural impermeability is imparted.

This process lasts from 20 minutes. up to an hour.

Stages:

Preparatory period: oral hygiene, choice desired color using a scale, anesthesia.
Tooth preparation: with a drill, parts of the affected tissue and unnecessary remnants are removed.
Storage of the material in a dry place: if moisture enters the quality of the material deteriorates.
Reinforcements in case of loss of a lot of dental tissue: transparent ones are used for the anterior surface of the molars.
The specialist models the crown using composites and compomers. Attached with adhesive.
The final stage: give the final shape, polish and grind the surface.

Indirect correction with veneers is easier to perform. The main work takes place in the laboratory and does not cause discomfort to the patient. The purpose of this method is not so much to restore as to hide the defect.

selection of veneers

Stages:

Choice of veneer color.
Extraction of the desired molar: cut down thin layer from the front surface.
Cast making.
To protect the open cracks after the preparation, the tooth is protected with special plastic veneers.
In the laboratory, plaster dental models are made and veneers are made from them.
With the help of composite glue, the veneer and dental tissue are connected.

Features of the restoration

When planning aesthetic reconstruction contraindications must be taken into account.

These include:

Previously, the lingual surface was filled in the affected area.
unnatural fast development inflammation.
Bite disorder.
Fast erasing of enamel.
Bruxism (grinding during sleep).
Absence chewing teeth.
Passion for boxing.
Small mouth.

Important! To correct the anterior part of the surface, use high-quality materials with a high similarity to a natural tooth.

Estimated cost

The price of the procedure depends on many factors. This is a method of treatment, the use of sterile disposable instruments, the estimated scope of work and, of course, the material.

Therefore, the cost depends on individual characteristics and wishes:

Restoration of a small chip - 1450-2000 rubles.
Restoration without protection with a pin - 3450-4000 rubles.
Direct restoration with a protective pin - 4500-6500 rubles.
Indirect restoration from composite materials - 1400-2500 rubles.
Indirect restoration with ceramic structures - up to 15,000 rubles.

For the artistic restoration of teeth, we use the best nanocomposite materials - the Japanese material Estelite Asteria and the Italian Enamel plus HRi. Artistic restoration teeth from 7700 rub

Americans say: "What does your smile say about you?" (What does your smile say about you?).

Included in the price:

Anesthesia and pain relief

Anesthesia
Modeling teeth on wax
Tooth treatment
Taking impressions
Veneer making
Veneer fixation

Aesthetic restoration of teeth

Modern aesthetic dentistry does everything so that your smile speaks of your success, your beauty and health. One of the methods for achieving a perfect smile is the method of artistic restoration.

Art restoration of teeth is a process of aesthetic imitation of dental tissue with the help of artificial materials, thanks to which natural structure tooth.

It is worth noting that today this popular procedure has become completely painless.

This technique is applied in cases:

1. If you need to change or restore the shape of the tooth.

2. If the tooth is destroyed (including caries).

3. If a chipped tooth has occurred.

4. If caries has appeared under the filling.

5. If correction of the contour of the teeth is necessary for the aesthetic beauty of the smile.

Briefly about the methods of artistic restoration of teeth

The necessary restoration method is determined by the doctor, depending on the restoration area (smile area or chewing area), the amount of destruction of a particular tooth and the amount of work in general (the number of teeth being restored).

If the installation of a filling is indicated for the teeth, then as part of the artistic restoration, a filling made of nanocomposite materials is installed, which allow you to completely imitate the relief, transparency and color of the restored tooth - the aesthetic norm.

After such a restoration, it is almost impossible to determine the place of the filling with the naked eye.

If the installation of veneers is indicated, then, depending on the number of teeth and other factors, we choose either a composite restoration of teeth (direct or, as they are also called, composite veneers), or an indirect restoration method (laboratory veneers).

Below we consider in detail the methods of artistic restoration.

Very often, the patient is shown a combination of several methods of dental restoration. Subscribe to get detailed plan restoration of your smile.

Artistic restoration of anterior teeth

There are two methods of artistic restoration of the anterior teeth:

1. Aesthetic restoration, with the restoration of the natural shape and color of your tooth.

2. Total composite restoration, which allows, if necessary, to completely change the shape and color of the tooth.

Aesthetic restoration of anterior teeth

It is used in the restoration of tooth areas partially destroyed by caries or as a result of mechanical trauma.

Various composite materials are used for this work. We use Estelite Asteria and Enamel plus HRi.

In fact, aesthetic restoration is the same as a dental filling, only with the use of premium composite materials and with absolute attention to the shape, transparency and color of the filling.

After a while, you yourself will forget which tooth you have a filling on. A filling, thanks to more quality materials, much more durable and resistant to chipping, and darkening.

Total composite restoration of anterior teeth

Total restoration of teeth with composite material is performed immediately in the patient's oral cavity with materials latest generation These are composite veneers.

Composite restorations are placed in a more gentle preparation with minimal invasive intervention. One or more of these composite veneers it is possible to put on the teeth in just one visit.

And although composite veneers are inferior to ceramic veneers in terms of resistance to abrasion, smoking and food coloring, their comparative economic availability, one-time manufacturing and relative ease of adjustment (in the future) make this type of artistic restoration of teeth the most popular among patients.

But the main thing is that with direct composite method artistic restoration, the teeth look very natural, thanks to the aesthetic properties of the material Enamel plus HRi. What is the naturalness of the tooth is easy to understand if you compare the ceramic-metal crown and living teeth of the same whiteness.

The aesthetic qualities of direct (composite) veneers are higher because the teeth look more natural.

Indirect method of restoration of anterior teeth

The indirect method is the restoration of the smile zone with laboratory veneers, that is, veneers are made in the laboratory from various ceramic materials.

This is a more expensive and complex procedure, which consists of several stages:

1. Preparation of the tooth for restoration, taking impressions.

2. Production of ceramic (or zirconium, porcelain) veneers in a dental laboratory.

3. Installation of veneers on the teeth. In total, with this method, it takes a dentist from several days to a month to put veneers.

Here is a video example of installing indirect veneers on teeth:

Artistic restoration of chewing teeth

The artistic restoration of chewing teeth is not much different from the aesthetic restoration of the front teeth.

Such work cannot be called simply the installation of a seal, because chewing teeth require no less attention than the front ones.

When filling chewing teeth, it is also important to restore their natural shape, reproduce the surface microrelief, as well as the shape of the cutting edge. This allows you to save the bite and chewing function of the tooth by 100%.

Of course, in this case, one cannot do without modern nanocomposite materials.

For posterior teeth, the restorative composite Estelite Asteria is quite suitable, since such strict requirements for the aesthetics of the restoration are not imposed on the zone of posterior teeth. At the same time, in terms of strength, fit and durability, this material is not inferior to the Enamel plus HRi composite.

Prices for artistic restoration of teeth

Included in the price:

Artistic restoration (aesthetic filling)*

Anesthesia and pain relief
Preparation for filling (preparation, drug treatment, padding, etc.)
Sealing with nanocomposite material Enamel plus HRi
Occlusion control, grinding, polishing, etc.

Veneers by direct method (composite veneers)**

Anesthesia
Modeling teeth on wax
Tooth treatment
Taking impressions
Individual selection of the shape and color of the veneer
Veneer making
Veneer fixation

*Price depends on the degree of tooth decay.

**Composite veneers. The price depends on the choice of composite material.

Leading dentist appointment

Dentist-orthopedist, specializes in aesthetic treatment and prosthetics. Has 15 years of experience in therapeutic and orthopedic dentistry. Performs complex endodontic operations using a microscope.

Equipment

Gendex Expert DC 75/DC 65 is a high-frequency wall-mounted X-ray machine.

This device is part of the premium line of X-ray equipment of the largest German company in this field, Kavo.

High-frequency X-ray technology with DC generator provides stable quality, short exposure and low radiation dose for the patient.

Standard curing dental lamp.

A dentist uses such a lamp when filling a tooth with a light-curing material, including a nanocomposite.

We use a Woodpecker lamp - a serious manufacturer that offers high-quality polymerization lamps with powerful and stable light.

Artistic restoration of the anterior teeth is a set of measures and dental procedures in the aggregate aimed at improving appearance teeth, and bringing them into a state as close as possible to the physiological. It is performed through the use of filling materials or veneers.

Dental restoration methods

Depending on the condition of the patient's teeth, the method of restoration is chosen:

Straight
Indirect

The method of direct restoration is characterized by the use of photopolymers (light-curing filling materials). Such work is carried out by a dental therapist, and more often is called artistic restoration of teeth.

The method of indirect restoration is a kind of prosthetics, by manufacturing and setting veneers, is performed by a dentist - an orthopedist.

Stages of direct restoration of teeth

Most often, the method of direct restoration of teeth is used for small lesions of the teeth of the frontal (anterior) section.

The first stage of the restoration activities is the preparation itself, which includes:
- Carrying out hygienic cleaning of teeth, using polishing paste and nylon brushes
- Selection of the color of the composite (filling material), by using a special color scale, relative to the area or the entire tooth being prepared for restoration
- Restoration of teeth is carried out under anesthesia, respectively, the introduction of analgesic drugs.
The second stage is characterized by the preparation of affected teeth. Drilling out areas of the tooth affected by caries, or a previous restoration that has lost its aesthetic appearance. In any case, gentle technology is used during the preparation in order to preserve healthy tissues as much as possible.
The third stage is the isolation of the tooth from the patient's wet breath and saliva. The ingress of moisture worsens the quality of the restoration of teeth by an order of magnitude, as it negatively affects the condition of fillings made of photopolymer materials. As a rule, cotton balls, rollers, saliva ejectors do not provide reliable protection Therefore, for the artistic restoration of the anterior teeth, a rubber dam is increasingly being used. Violation of isolation technique often causes such undesirable consequences how:
- Violation of the marginal fit of the filling, which in turn contributes to the development of secondary caries.
- Loss or deformation of the filling composite, spontaneously or under load.
The fourth stage, depending on the clinical need, fixes the pins in the channels. For the artistic restoration of the anterior teeth, fiberglass posts are used, a huge advantage of which is their transparency. Unlike traditional metal posts, they allow you to give the restored tooth a natural color.
The fifth stage, and in the case when pins are not required, the fourth one is the modeling of the tooth crown, performed by light-cured composites. Thanks to the layered application of filling materials of different shades, an appearance as close to natural as possible is achieved.
The restoration of the anterior teeth is completed by the sixth stage, which includes:
- Modeling with burs the final shape of the tooth
- Final polishing and grinding of the filling surface

Sometimes the restoration of anterior teeth is practically the only way make your smile irresistible. And at the same time preserve a maximum of natural natural tooth tissues. The indication for dental restoration can be not only the presence of pathological processes, but also absolutely healthy, just uneven teeth, teeth with a worn surface, the presence of large tooth gaps.

The restoration of the teeth video, which you can watch below, will help you at least roughly imagine what awaits you in the dentist's office if you plan to fix your teeth.

Indirect tooth restoration

Restoration of anterior teeth

Carrying out indirect tooth restoration with the help of veneers is characterized by lining the front surface of the teeth, microprostheses. Veneers are a kind of crowns, but unlike them, they do not cover the tooth from all sides, but only from one or two. With the help of veneers, it is a little easier to make an ideal restoration of teeth than with filling materials, because the latter requires especially careful and painstaking work by the dentist.

Aesthetic restoration of teeth indirect method has a number of contraindications in contrast to the direct method:

The use of resorcinol-formalin treatment on a tooth planned for restoration
Malocclusion
Having a diagnosis pathological abrasion teeth
Absence of one or groups of chewing teeth
Bruxism disease - bad habits bite off nails, threads with teeth, open beer.
Restoration of teeth is contraindicated in the management unusual image life, such as boxing
Extensive destruction inner surface tooth
Previously performed filling of the lingual surface of the same tooth

Stages of indirect restoration

Restoration of teeth with veneers allows you to make them perfect, with the help of various means and materials.

It is carried out in several stages:

The first step in an indirect restoration is to determine the color of the material from which the veneer will be made.
The second stage is characterized by preparation. Depending on the clinical need, from 0.5 to 1.5 mm of tissue is grinded from the front surface of the teeth.
Next, the third stage, take a cast
Restoration of teeth in the fourth stage consists in fixing temporary veneers on the prepared tooth in order to protect exposed tooth tissues from negative impact various factors in the oral cavity, until the moment when a permanent veneer is placed.
The fifth stage is directly setting, fixing the veneers, which is carried out by gluing the surfaces of the tooth and the veneer with composite glue.

But for dentists, restoration with veneers includes another stage, located between the last two described, this is the laboratory stage. During which dental technicians in a special laboratory make exact models of your teeth from plaster. Next, veneers are already made on them, different ways and methods, up to drawing microcracks to give the material a natural look.

The cost of dental restoration

Restoration of teeth before and after

Restoration of teeth before and after, which, your teeth look completely different, is available to almost every average Russian. How much does dental restoration cost? clinical case, is calculated separately, depending on the condition of the teeth, the amount of pre-treatment required, the method of restoration, and, of course, the cost of the materials used. Restoration of teeth at reasonable prices will help you create beautiful smile, you will regain your self-confidence, and you can safely smile without worrying about the appearance of your teeth.

Restoration of teeth is good exit out of position, and a great alternative to traditional dentures.

AT modern world everyone makes sure that his smile is perfect. Therefore, it is desirable to eliminate even not very significant defects, chips, irregularities on the enamel. Moreover, you need to contact the dentist if the teeth are destroyed or fall out. Currently, many people choose such a procedure as restoration of teeth. Restoration technologies can be different and the doctor will always be able to choose one or another for the patient. best option. Let us analyze in detail what it is aesthetic restoration of teeth.

Many people are interested in aesthetic restoration of teeth. First of all, it is worth understanding: the main goal of this technique is full recovery appearance and function of canines, incisors or molars.

Teeth before and after aesthetic restoration

At the same time, the materials and method of restoration depend on the specific dental problem. If the molar is destroyed, chewing function suffers. In this case, it is important to restore it. Therefore, the dentist should pay more attention to the selection of a durable material, and not to the appearance of the filling composition.

Restoration of front teeth

When the incisors are destroyed, the situation becomes more complicated. Biting through solid food does not require as much effort as chewing. In this case, the strength of the material is not so much important as the natural appearance of the smile after treatment.

The result of direct restoration of teeth

Then the dentist will say that aesthetic restoration of the front teeth is necessary. Photos before and after such a procedure can be seen in the gallery of our website.

Sometimes the patient is concerned about small cracks, curvature, darkening of the enamel. All such problems can also be solved by making an appointment and restoring a tooth. filling material.

Types of restorative techniques

Specialists use direct and indirect restoration in their work. The first option, as a rule, does not take much time. The doctor can do this procedure in one day. In this case, the restoring structure is made immediately at the dentist's appointment.

Indirect restoration requires more long-term treatment. In about a week, a filling material is prepared in a special laboratory. Upon completion of this process, proceed directly to the restoration

In addition, there are different types recovery depending on the materials used.

Application of veneers

This technique is also called composite tooth restoration, before and after photos of which are presented on our website. The material used in this technology is identical to that used for the manufacture composite fillings. it special compound with a heterogeneous structure, consisting of different layers.

Composite restoration

The strength of the material is given by the light of halogen lamps.

This type of recovery is direct. Composite restoration is done in just a few hours. Special veneers are made directly in the patient's mouth.

On average, composite restorations are made for a period of 5 years. If you properly care for your teeth after restoration, veneers will not lose their appearance. However, it must be remembered that after installing the veneers, you should not use abrasive toothpastes, since such products can scratch the surface of the product. Veneers need to be polished and covered with a protective varnish from time to time.

Such a restoration anterior tooth, a photo of which can be found on our website, allows you to quickly get rid of defects on the enamel, chips or cracks. However, it is important to remember that the composite material of veneers has a porous structure. The surface of the product quickly absorbs dyes and moisture. Sometimes use in in large numbers strong tea, coffee leads to the destruction of the prosthesis. Despite this, this treatment technique is popular because it is not very expensive and is performed in a short time.

Restoration with veneers

Before deciding on a composite restoration, you need to consult a doctor. This procedure has a number of contraindications:

infections respiratory tract, inflammation, open sores in the oral cavity;
pregnancy (first and last trimester);
Do not make a composite restoration immediately after vaccination or tooth extraction.

The procedure is carried out under anesthesia. The doctor will pick up suitable remedy and the required dosage for anesthesia. An injection is made in the tissue above the tooth that needs restoration. In this case, numbness occurs only in the area in which recovery will be carried out.

After applying anesthesia, the dentist removes part of the enamel with a drill. This is necessary so that the installed veneer does not protrude. Usually it is necessary to grind off 0.3-0.7 mm of enamel.

In some cases, the restoration of crooked teeth is required; photos before and after restoration demonstrate the results of applying the composite technique. If it is necessary to make the teeth even, in this case the doctor will remove those areas of hard tissue that protrude from the general row.

Correction of crooked teeth with restoration

Such grinding is required in order for the veneers to have a natural appearance, as well as to be more durable and the composite material better adhere.

After processing, the enamel is thoroughly cleaned, degreased, applied antiseptic solution. After that, you can prepare the composite composition and apply it in layers on hard tissue. In this case, the dentist must correctly select the shade of each layer of material so that after the restoration the patient's smile looks perfect.

The applied layers of the composite composition are successively dried with a special lamp. The veneer is then sanded to its final shape, and a fluoride varnish is applied on top.

Ceramic veneers

After the composite restoration teeth, the patient is not recommended to eat, smoke. Such restrictions are necessary for the composite material to cure.

The use of ceramic veneers for dental restoration

Ceramic restoration of teeth has many advantages. Such material is not rejected by the body, is not subject to scratches. After restoration with ceramics, teeth can be cleaned with a stiff brush and do not be afraid to use abrasive pastes.

In addition, ceramic veneers have a long wearing period - about 10 years. During this time, the material will not be erased and will not lose its attractive appearance. However, veneers should not be exposed heavy loads, such a restoration must be protected from chips. Even with little damage the restoring plate will have to be completely replaced.

The main element in the composition ceramic restoration is a special durable cement. It is a material that is safe for the body and does not affect the taste of food.

In addition, the dentist needs to choose the right natural shade of the teeth. This is done using a special tool, the so-called Vita scale.

Vita scale for determining the color of teeth

This fixture contains numbered ceramic specimens of molars and incisors. The doctor in turn brings such models to the patient's teeth and chooses the closest color option. The results are then sent to a laboratory for the manufacture of the appropriate restorative material.

Enamel grinding is rather unpleasant, but necessary procedure. In some cases, you can get by with minimal grinding, for example, if you are offered to install a more gentle type of veneers - lumineers.

The dentist then takes an impression of the patient's teeth. For this, a special gypsum composition is used, which quickly hardens. An impression is made from the top and mandible. In this case, you can achieve the perfect appearance of a smile and even veneer.

Already during the next visit to the dentist, veneers can be installed. If necessary, the doctor makes small adjustments. If this is not necessary, veneers are fixed in the mouth with a special cement.

The process of dental restoration

Those who have just installed such veneers are not recommended to drink hot drinks - otherwise there are no restrictions.

Installation of crowns

Crowns are a means of prosthetics, which are used when destructive processes have already occurred in a diseased tooth, the integrity of hard tissues has suffered. Veneers can help get rid of only minor defects, and it is better to put a crown in advanced cases.

dental crowns

Used to make crowns different materials. The most suitable and closest to natural look tooth option – ceramic crown. In addition, these prostheses are highly durable. Like ceramic veneers, this material is resistant to scratches, color changes. Moreover, crowns have one more indisputable advantage - they are not afraid of splits.

There are also metal-ceramic crowns. The frame of such products is made of titanium or steel. These are quite strong prostheses, but due to the small content of natural material, their cost is less.

Metal-ceramic crowns

Sometimes plastic crowns are used as a temporary solution. They are not reliable, the service life of such prostheses is no more than 12 months. To increase this period, you can choose an alternative - plastic prosthetics with a metal frame.

Despite the low cost of plastic crowns, they look quite natural, however, they quickly become unusable. Plastic absorbs various coloring substances, deposits accumulate on its surface.

Temporary plastic crowns

Before installing the crowns, the enamel is grinded to a greater extent. Then, as in the manufacture of veneers, an impression of the jaw is made, the shade of the teeth is selected according to the Vita scale. Crowns are made in about a week. After the finished product is tried on, it is ground down a little if necessary.

First, the dentist attaches the dentures to temporary cement. You need to make sure that this type of restoration is suitable for the patient. If after 7 days there is no rejection, and no complications appear, the doctor fixes the crowns permanently.

After the installation of crowns, there are no restrictions on food intake. Some special care for such prostheses is also not provided.

Teeth extension technique

Aesthetic restoration of teeth with extensions, photos, before and after which can be found in the gallery of our website, is performed using filling materials. This method is used to restore teeth with chips, damage. Its advantage lies in the fact that it is not required to grind the enamel, you can save the whole living tissue tooth. This procedure has a low cost compared to other restoration techniques.

Materials used

The extension or restoration of teeth with filling material, the photo of which is presented in our gallery, is carried out using heliocomposites, reflective filling compositions, photopolymers. These are new generation materials that allow for high-quality and efficient restoration. Such compositions have excellent aesthetic qualities, perfectly take root with real teeth, do not damage the enamel and do not cause rejection.

Appearance of photopolymer fillings

These fillings do not deteriorate over time and do not change color. In their composition and properties, heliocomposites and photopolymers are similar to tooth enamel. Restorative materials of the new generation imitate even the transparency of teeth.

At the same time, the patient's own living tooth is preserved, and the nerve is not removed.

Building allows not only to restore the destroyed molar or incisor, but also to slightly correct its shape and size. This technology effectively hides cosmetic defects on enamel: darkened fillings, pigmentation.

Extension technique

First of all, the dentist professional cleaning teeth, removing calculus and plaque. In this case, the restoration material will hold more securely. Then the doctor selects the desired shade.

Using anesthesia, the dentist removes caries-affected areas, old fillings.

After that, the doctor applies a special latex material - rubber dam. It avoids contact of the restored tooth with saliva and wet breath of the patient. Such isolation is necessary, since its absence can reduce the quality of the extension.

The use of rubber dam in dentistry

When there is significant damage in the tooth, a pin is inserted into the canal. If this is not done, the restorative material may subsequently fall out under load.

The restoration itself is performed in layers. Material of different shades and with an unequal degree of transparency is applied alternately. As a result, the tooth should have a natural appearance.

At the end, the doctor performs the final modeling, grinding and polishing of the teeth.

Development of modern medical technologies allows to significantly improve the methods of restoration of teeth. New materials allow you to achieve the most natural effect, make your smile flawless, and your teeth strong and healthy.

Teeth before and after aesthetic restoration Result of direct tooth restoration Composite restoration Restoration with veneers Correction of crooked teeth with restoration