What to do with an ear plug. Symptoms and signs of cerumen in the ear. Reasons for the formation of sulfur plugs

But this does not mean at all that you need to forget about all the precautions and wash it, like all other things. Be sure to pay attention to the manufacturer's recommendations indicated on the label. This is the only way to avoid damage to the product. Well, of course, you need to figure out how to wash faux fur best.

Caring for faux fur requires taking into account several points:

Improper storage and washing can lead to shrinkage, deformation, and scuffs. It is not recommended to bend, wring out, store folded, wear a bag on the shoulder of a fur coat. Dry flat only.
Often the pile is stained different colors. Therefore, the use of bleaches and aggressive cleaners is prohibited, as it can shed, fade.
Some types of faux fur are made using polyisobutylene glue. Washing such things would be a bad idea, as the pile will simply come out.

Cleaning

Before you wash faux fur, you should clean it well. Shake the fur product, knock it out with a special beater or a bamboo stick. After that, go over it with a vacuum cleaner at low speed with a furniture nozzle. So you clean the fur from fine dirt and dust. This process is very important, otherwise the residual debris can, under the influence of water, get even more clogged into the pile and turn into “concrete”. It will be very difficult to clean the thing after that without loss of quality.

If there are single dirty spots, and the thing itself is clean, then it is possible to figure out how to wash the fur completely. It is enough to clean these areas. To do this, spread soap solution, and wash off the dirt with a washcloth. At the same time, rub from the edges to the center so as not to increase the stain. Next, the soap solution is washed off clean water, the pile is combed and dried with a hairdryer under cold air.

Grease stains can be absorbed by starch. Pour on a greasy stain, rub, replace with fresh starch and so on until the dirt comes off.

If the white fur has turned yellow, then a solution of lemon juice with the same amount of water will help restore its color. Just wipe with a dampened brush and dry. You can also wash if necessary.

If cleaning does not help, then you will have to wash it. Read the label carefully to see if the faux fur can be washed in your case. If there are no restrictions, then proceed. Basically, the rules are similar to washing an artificial fur coat, which you can read about in this article.

How to wash

If you can wash faux fur in a washing machine, then this is done like this:

The washing machine is set to the following washing parameters: delicate mode, temperature up to 40 degrees, speed up to 600, extra rinse, spin, dry - turn off.
Add laundry detergent or liquid detergent.
Fasten all buttons, zippers. If there are detachable elements, then they must be unfastened and washed separately.
Put the fur in the washing machine.
After washing, lay flat on an absorbent fabric horizontally, straighten so that there are no kinks. Comb the pile carefully. Then you can either leave it to dry like this, or hang it on a hanger. It will take a long time to dry, but you do not need to speed up the process, otherwise you will ruin the fur.
Be sure to periodically check the condition of the fur. Beat, comb, so as not to roll.

However, machine wash is allowed in a very rare cases. For example, for fur products with a long pile, this method will be equal to death. The pile will get mixed up and will either be cut or thrown away.

You will need a container large enough to fit the fur without kinks.
Get some warm water. The temperature is indicated on the product label. Usually it is 30-40 degrees. Not more.
Dilute the detergent. If you wash with powder, then stir it thoroughly so that all the crystals dissolve, otherwise it will be difficult to wash them out of the pile, especially the long one.
Soak the fur. It is not necessary to wrinkle, remember about deformations. Leave in water for half an hour, if necessary, wash the stains with a soft brush, rubbing in the direction of the pile.
Drain the water. Pour clean, add vinegar. It will give the fur shine. Rinse the products, then rinse under running water.
Twisting is prohibited. To glass water, hold the fur on weight. You can squeeze it out a little with your hands. Soak up the rest of the liquid terry towel.
Then dry horizontally, periodically combing and whisking.

This completes the faux fur wash. As you can see, nothing complicated.

Store washed fur only on a hanger. Folding it is prohibited. The storage location should be dry and shaded, away from heating appliances. Be sure to hang a moth repellant nearby.

Well, remember that if you are not confident in your abilities, then it is better to give the clothes to dry cleaning.

How to wash faux fur at home

Before applying any cleaning method to your faux fur coat, you should read the manufacturer's recommendations, which are indicated on the product label. Very often, a fur coat needs to be dry-cleaned, for example, in cases where there is a printed pattern. However, many of these coats can be completely brought as a gift and at home.

So, there are two main ways to wash faux fur: manually and in a typewriter. The first option is suitable when the pollution is local in nature, or when you need to wash the whole thing. Pre-soak the product in warm water with mild detergent or soapy water. Wait half an hour, and then clean the fur coat with a soft brush.

Also, for some items made of faux fur, machine wash is also acceptable. It is important that the water temperature does not exceed 40 degrees. Use the delicate wash mode.

Remember, you can wash a fur coat no more than once a season.

After washing, the fur should be smoothed with a towel in the direction of the pile and then dried. Some precautions need to be taken:

do not twist your fur coat, just wring it out lightly by wrapping it in a towel;
dry your faux fur coat exclusively naturally- on the laundry rack;
do not put it on either the battery or on any other heating device - the fur may be deformed;
during drying, the product should lie flat;
fur should be neatly combed in the right direction;

After it is completely dry, go over the fur with a brush with metal teeth - this will add shine and help fluff the pile.

Washing a synthetic product by hand - The best way clean it and keep the original look at home. But this process also has its own peculiarities.

How to wash faux fur without using an automatic machine? To complete the task, you must perform a series of actions in sequence.

Find a laundry container that can fit the item. If the hostess plans to wash a collar or a hat, then it will be enough for her to place them in a basin with a solution of warm water and washing powder. If you plan to wash a large product, you will need to fill the bath.
The cleaning process of faux fur products should be carried out at a temperature not exceeding 40 degrees.
After making sure that the water temperature is suitable, the hostess should place the product in water and leave it for 20-30 minutes. Places where the pile is heavily soiled can be squeezed with your hands. Rubbing or twisting synthetic clothing is not recommended.
Washed fur must be rinsed in clean water without much pressure. For the procedure, it is required to apply first warm, and then cold water. This will give the product a shine and effectively remove soap and dirt residues.

If the clothes are dirty in only one place, then it is better to refuse to wash the entire product. To clean the stain, you need to take a cotton swab or disc and apply a soapy solution to it, then gently rub the contaminated area. After the procedure, leave the thing with the solution for 5-10 minutes, and then take a damp cotton pad or swab and remove the detergent residue.

Most easy way to wash a hat, coat, hood or faux fur blanket at home is washing in a typewriter, which most will do the work for you.

If you are absolutely sure that this method will not harm your things, it is important to consider a few nuances:

Preferably, if you use a washing machine that has a wash and spin setting, top-loading models are usually best.
Choose the most delicate detergent possible, it is best if it is powders and concentrates for silk or wool.
To avoid adding problems to yourself, wash faux fur separately from the rest of the linen. Even if you only need to wash one hat. If it is possible to detach fur parts, such as a hood, from things, do this and wash them separately.
Before washing, it is advisable to soak a fur product, such as a fur coat or a blanket, and let the product act on it for about 20 minutes. Do not leave the fur for more than half an hour so that the fibers are not damaged.
After 20 minutes of soaking, wash the item in the rinse cycle for delicate fabrics at minimum speed, if none are provided, gently wring out the fur by hand.
If possible, hang the wrung out thing on a coat hanger, wait until the water stops dripping from it and send it to dry in a well-ventilated place. It is important to protect the fur from direct sunlight.
During drying or after it, gently comb the fur with a soft brush.

It is important to know how to wash faux fur by hand for those who wear a fur coat or other product made from it. Owners of faux fur clothes with long pile will have to wash their fur coat, coat or hat at home with their hands. To properly carry out this procedure, it is also important to consider the sequence and correctness of the actions:

If you need to wash one or two spots from such a product as, for example, a bulky blanket, there is no need to wet it all. Wipe the contaminated area with a cotton pad dipped in a mild soapy solution. Leave for a while, no longer than 10 minutes and wash the solution with a cotton pad moistened with clean water. Untidy stains will no longer spoil your blanket, but washing will not require much effort either.
To wash something small, such as a hat or hood, use a small container. If you need to wash a thing that will not fit in any basin that is at your disposal, dilute the soap solution from washing powder or concentrate right in the bathroom. The solution water should not exceed 40°C. Soak faux fur clothes in it and leave for half an hour.
Before rinsing, you can lightly rub the fur with your fingers or a sponge in places where it especially needs washing. It must be rinsed very carefully so as not to pull the pile out of the base, first warm water and then cold.
Wring out the thing carefully by hand, blotting with an absorbent towel or material. After that, the clothes should be hung on hangers and sent to dry away from heaters and direct sunlight.

How to wash fur?

We suggest that you carry out the process of washing fur at home in stages. Follow these guidelines.

Stage 1 - preparation

Knock out the product from dust from the wrong side.

Stage 2 - choosing a cleaning agent

Before applying any agent or solution, test for strength:

Apply a few drops to the base of the fur.
Wait until the agent is absorbed.
Pull the base in different directions, if it does not stretch or deform, proceed to washing.

Stage 3 - washing

If you decide to machine wash, follow these rules:

Roll up the product front side inside.
Load the item to be processed with an old pillowcase or linen bag, sew it up.
Use liquids for washing woolen and silk fabrics.
Turn on delicate wash mode with minimum pressure.
When rinsing, add antistatic agent for synthetics.

Hand wash faux fur like this:

Fill the laundry container with warm water.
Dilute the detergent for delicate fabrics or a neutral hair shampoo without conditioner.
Soak the product for a while, depending on the degree of contamination.
Wash by alternately running your hand against the pile and behind the fur.

Stage 4 - rinsing

It is very important to know not only how to properly wash faux fur, but also how to process it further. Otherwise, it won't work desired result. Given the characteristics of the fleecy material, be sure to follow these rules when rinsing:

Rinse several times in warm water to thoroughly remove detergent.
To keep the pile in place and acquire a shine, rinse in cold water, slightly acidified with vinegar.
Do not twist the product, wring it out slightly
Place a stick or stool across the bathtub, pile the processed thing on it so that water flows.

Stage 5 - drying

It is also necessary to dry faux fur correctly. For this:

After the glass is the main part, hang the fur product on strong wooden coat hangers or on the crossbar to drain with the pile down.
Dry at room temperature avoiding direct sunlight.
To prevent the lining from suffocating, periodically turn the lining inside out when drying, and then vice versa.

Stage 5 - final touch

While the cleaned item is drying, the fur must be combed several times in all directions.
Leave until completely dry.
Shake well, straighten.

Stylish and affordable items made of faux fur firmly occupy the first positions in the production of clothing made from synthetic fabrics. Almost everyone in the house has at least one product made of this material: a fur coat, a handbag, a hat and even a plaid.

Many housewives are concerned about the question of how to clean and wash faux fur clothes in order to preserve the structure of the fabric and not ruin their favorite thing.

By following simple rules, it is quite possible to cope with washing fur products at home without resorting to dry cleaning services.

1 Wash by hand
2 Machine wash
3 How not to wash

Washing by hand

Wash small items by hand

A product made of faux fur fabric with a long pile can only be washed by hand, while materials with a short pile easily tolerate machine washing.

If you need to wash a small item, such as a hat, mittens, collar or hood, proceed as follows. Not very hot water is poured into a container of suitable size, the temperature of which should not exceed 40 ° C, and liquid soap or gel is added.

It is not recommended to use dry detergents or soaps with active chemical additives, as they can spoil the structure of the pile. In extreme cases, if only washing powder was found on the farm, it must be separated from large particles and thoroughly dissolved in water.

After washing, the fur must be carefully combed

Rinse the fur thing in plenty of water, first warm, then cool. Before wringing out the product, it is necessary to remove it from the water and, putting it on some kind of stand, let the bulk of the liquid drain. After that, it is necessary to get wet with a towel several times, in no case twisting the material.

It is better to dry clothes on hangers, away from radiators. After drying, the fur can be combed with a comb with rounded teeth.

You should not start washing large bulky items, for example, a blanket, if pollution takes small area. It is much easier to remove a few stains with a gauze swab dipped in soapy water.

Machine wash

At proper care products will last a long time

Machine wash is acceptable for faux fur products with a short dense pile. Before loading things into the machine, you need to read the manufacturer's information on the label about the requirements for caring for this fur product and the possibility of automatic washing.

Starting to clean the fur product in the machine, you should follow a few rules:

Before washing, it is advisable to soak things in warm water with detergent for 15-20 minutes. In order not to damage the fibers, the fur should not be kept in water for more than the specified time.
If you need to wash white faux fur, then before immersing it in a soapy solution, you need to moisten a soft sponge in water with lemon juice and treat the fur surface with it.
From detergents, you need to choose those that are suitable for washing delicate fabrics, silk or wool.
It is recommended to wash synthetic fur separately from other clothes. If you need to wash the hood or collar, it is better to unfasten the parts and process them separately from the jacket.
After soaking, the fur clothes are loaded into the machine and washed in the mode for delicate materials at a water temperature of not more than 40 ° C.
It is necessary to wring out the product at the smallest speed or manually.
Dry the thing should be on the shoulders, in a ventilated area, away from ultraviolet rays and heaters.

Faux fur requires special care. Only in this case the pile will for a long time stay shiny and fluffy. It is especially important to wash fur products correctly, following the instructions, and remember which operations the fur categorically does not tolerate.

Faux fur should not be heated, as at high temperatures the synthetic fiber can deform.
It is forbidden to dry fur products in a machine or dryer. After drying with hot air, the item will probably be irretrievably lost.
Do not treat synthetic fur with bleaches, stain removers and other chemicals that are aggressive to the fiber.

Especially carefully and carefully should be handled with white fur. Because of wrong choice detergents white fur coat can purchase yellowish color, and the long nap gets tangled and broken.

Adhering to the above simple rules, you can perfectly wash faux fur yourself at home, without resorting to dry cleaning services.

Not everyone knows how to clean faux fur at home. Attempts to remove dirt manually or in a washing machine are not always successful. Often, after washing, the product loses its decorative qualities. The fur becomes dull.

His villi stick together, felted and look shaggy. Dirt is fixed on the pile and eats into the fibers of the soil. If the basis of faux fur is made of cotton fibers, then after washing it may shrink.

Proper cleaning will help restore the purity of the product, while maintaining all its qualities.

If faux fur has become dusty during storage, it can be knocked out. To do this, the thing is laid out on a damp clean cotton cloth pile down and beaten with a carpet beater. During the knocking out, the dust accumulated between the villi will settle on the damp cloth. After cleaning, the product must be dried in a straightened form.

Faux fur product

If after knocking out the dirt on the pile remains, then it can be removed with soapy water. For this:

The product is hung on hangers so that the surfaces to be cleaned are in a vertical position.
In 1 liter of warm water (35-40 ° C) you need to add 2-3 tbsp. l. neutral shampoo(transparent, without additives and dyes). The solution is shaken by hand until a fluffy foam is formed.
The foam is carefully applied to the pile with a brush. In this case, it is necessary to avoid getting the washing liquid on the fabric base.
It is necessary to clean fur with long and medium pile only in the direction of its growth. A product with short villi (1-2 cm) is cleaned in the opposite direction. This is the basic rule for cleaning faux fur products.
After applying the foam, its excess must be removed with a damp cotton knitted cloth, squeezed out almost to dryness.
To dry a thing, it is wiped with a clean terry towel. After that, the product is placed in a well-ventilated room or outside to dry. It must not be exposed to direct sunlight. Heating devices should be at a distance of at least 1.5-2 m from wet clothes.
The dried pile must be combed with a metal comb with rare teeth. It is better to use a special iron needle comb.

IMPORTANT TO KNOW! Do not cut "fungal" nails! Nail fungus is displayed like this: treat your nails with a regular ...

To make the fur shiny, crumbly and fluffy, it should be treated with a mixture ethyl alcohol, water and glycerin. To do this, 0.5 l of ethyl alcohol is mixed with 0.5 l of water and added to 1 tsp. glycerin. The liquid is sprayed onto the pile from a spray bottle or gently applied with a cotton swab. When the product dries, it is combed again.

How to wash light fur?

Before washing faux white fur, pay attention to the presence of yellow spots. They must be removed, since they will still stand out against the general background of the cleaned thing.

There are several simple ways to wash white fur. Choose the one that suits you according to necessary funds and the degree of contamination and proceed according to the proposed instructions.

Method 1

If you are looking for the easiest method to remove yellowness from fur, use lemon juice or vinegar:

Wet the yellow stain with acid.
Lightly brush with a soft brush.
Dry.

Method 2

Use foods such as semolina, starch, and crushed chalk to best effect warm them up until warm.

Lay the product on a flat surface so that it is convenient for you to process the product.
Spread the bleach over all problem areas.
Rub the pile with your hands.
Shake it off.
Clean the fur with a brush.

Method 3

If the above methods did not solve the problem, make a more aggressive stain remover with your own hands.

Mix in equal parts water, ammonia and hydrogen peroxide.
Soak a sponge in the solution.
Walk through problem areas, following the course of the pile.
Air dry.

Removing grease stains

You can get rid of a greasy stain on faux fur with gasoline. It copes well with this kind of pollution.

Take a cloth handkerchief and soak the edge of it in refined gasoline, wring it out so that the gasoline does not drip, then treat the stain. Remember that the spots do not rub and their area does not increase, you need to move from the edges of the spot to the center, and not vice versa. The procedure can be repeated several times until the stain disappears. Then wipe the place of contamination with a damp cloth and dry the product. It is advisable to do this in the shade on the balcony so that the smell of gasoline disappears faster.
There is another practical method for cleaning grease stains from faux fur. You need to mix refined gasoline and potato flour to make a thick paste. Then the resulting mass is applied to the stain and left until the gasoline has completely evaporated. After that, you need to shake the fur and clean it from the remnants of flour. To do this, apply heated starch to the spot and rub it well. Flour will be easily removed from the fur along with starch.

How to wash natural fur?

As we have already noted, natural fur is not processed with ordinary washing, but stains must be removed from it. Therefore, use one of the options below if you have a beautiful thing made of natural pile.

Method 1

To remove dirt from the fur surface, use a soapy solution:

Dilute dish detergent in warm water.
Apply the product to the fur with a sprayer.
Brush off most of the dirt.
Wash off any remaining product with a damp cloth.
Comb dried stray hairs.

Method 2

A mixture of ammonia and table salt will help you wash off greasy stains:

Prepare the following solution: in 0.5 liters of water, mix 3 tbsp. salt and 1 tsp. ammonia.
Wipe greasy areas with a sponge moistened with liquid.
Treat long fur along the way, short fur against the direction.

Method 3

You can wash and refresh a fur item using detergents for delicate fabrics:

Dilute 2 tablespoons of the product in 1 liter of warm water.
Shake until foam forms.
With a stiff brush, apply foam to the fur, wipe over the growth of the pile.
Rinse off with a clean damp cloth.

Method 4

To wash items made from nutria, beaver, otter and mole fur, use hot river sand:

Place the item to be cleaned on a flat surface.
Heat the sand to a temperature that you can hold it in your hands.
Sprinkle the fur.
Rub the entire surface of the product, paying attention to more contaminated areas.
As the sand gets dirty, change it to a new one.
Shake out.

Method 5

You can wash the long-haired fur of arctic fox, silver fox and fox with a comb with blunt sparse teeth. Be prepared, the preparation itself for cleaning will take some time.

Wrap the comb teeth with a thin layer of cotton.
Prepare a solution in a 1: 1 ratio of medical and ammonia.
Dip a comb in the mixture.
Comb the fur, in the direction of the pile.
Change the cotton wool until the pollution disappears.

Fur coat white

Owners of designer fantasies are often tormented by the question of how to wash a faux fur coat. Let's see what it is. Lift the lining and examine the product from the wrong side. We will see a ribbed surface with small cells, similar to a knitted fabric. The conclusion is correct: the synthetic skin is a knitted fabric into which the pile is woven. Conclusion: the material will have the advantages and disadvantages of knitwear.

Knitted fabrics are distinguished by a variety of textures. Let's see what qualities fluffy joy is endowed with. Co. inside piece of fabric is sewn onto the garment. Let's use the clipping for testing. Consider the features of a fleecy fabric. Extensibility is the main quality of knitwear. Pull the piece along, then across. In one of the directions, he will stretch. This should not be forgotten when caring for a coat.

Let's check the piece for weaving strength. We pull the edge - the loops did not go down. Fur fabrics are treated with a special impregnation that prevents blooming. It remains to carefully read the manufacturer's instructions and you can wash it.

We figured out how to wash a faux fur coat in a typewriter. What if the coat white color? It has become fashionable to get married in winter in elegant white coats. After the wedding, the white fur outfit continues to delight the hostess. How to wash a wedding coat? Washing white fluffy joy is no different from the fur of other shades.

We first return the coat that has changed color original view. To do this, it must be placed on a coat hanger and sprayed with a special solution. It is prepared like this: one tablespoon of hydrogen peroxide is added to a liter of cold boiled water. For spraying use a spray bottle. Half an hour after processing, we place the product in an automatic machine. Help restore color lemon juice. It is diluted in half with water.

Are there stains on the coat? Get rid of them before washing. Lipstick stains are perfectly destroyed by Vanish or other stain remover. Dishwashing foam will help remove grease stains. Apply the selected product to the stain, hold until it disappears completely, then rinse in running water.

The answer to the question of how to wash a faux white fur coat so as not to spoil it is simple. Care for the product in accordance with the manufacturer's instructions and the above instructions. Do not expose the fur coat to frequent exposure to water and detergents. Remember that the white cover is not meant to be worn all the time. If you are attentive to your favorite thing, then it will serve you for a long time.

A common problem for owners of white faux fur coats is the appearance of yellow spots on it over time. Fortunately, there are methods that will allow you to return the whiteness of the product even at home.

You will need water and hydrogen peroxide. Dissolve peroxide in water - 1 tablespoon of peroxide per 1 liter of water. In this solution, wash the product. It is better not to wet the base of the fur coat, but to process only the fur with a brush. You can also add liquid to a spray bottle and spray the lint. After cleaning, dry the product, following the drying rules for faux fur, described above.

Potato starch will also help get rid of yellow spots. This simple and convenient method will allow you to quickly put your favorite little thing in order. Rub the starch into the pile thoroughly, then shake the fur coat and remove the residue with a dry clothes brush. You can do this procedure for prevention. So your white fur coat will please you with an excellent appearance for a longer time.

IMPORTANT! Before using any cleaning products, especially chemical ones such as gasoline, be sure to test how the fur reacts to it. Apply the substance to a small, inconspicuous area. Remember, under the influence of gasoline, a thing may lose its colors, discolor. Also keep in mind that gasoline is not suitable for cleaning artificial astrakhan products. Do not use acetone or vinegar to clean faux fur, it will only harm them.

No need to try to scrape out the gum, you just pull out the villi, after which a bald spot forms on the fur coat, and the product will be completely damaged. Take some ice from the fridge and put it in a plastic bag, then put the ice on the gum for a while. Wait until it hardens under the influence of cold.

Cleaning rules

Apart from proper brushing to maintain a good appearance, faux fur must be stored in accordance with certain rules.

Remember, in order for the fur to remain beautiful and fluffy, things need to be provided with enough free space. Do not try to hide your fur coat in a dresser, chest or suitcase for the summer - the fur coat will wrinkle, and traces of folds will be visible on the fur.
Hang the fur coat on coat hangers that clearly fit her size and place in the closet. Do not wrap the product in plastic wrap, you can use a cover made of natural fabrics (which allows air to pass through well), or paper.
The closet or dressing room where you store faux fur should be dry and clean. Take care of the absence of an unpleasant musty smell. If necessary, you can use natural flavors.
When you take a thing out of the closet, before the start of the season, knock it out with a bamboo cane. Lay the fur product on a sheet and walk over it with a bamboo stick. So you knock out the dust that has accumulated on your fur coat.
Fur must be kept exceptionally dry and clean.

Thinking about whether it is possible to wash faux fur, the hostess should remember that the procedure for cleaning a synthetic product at home requires strict adherence to the manufacturer's recommendations indicated on the label.

Regardless of the washing method, a number of conditions must be met.

Observe temperature regime indicated on the label. Faux fur is afraid of heat. At high temperatures, the fibers of the product are deformed, and the structure softens. A synthetic product may lose its smoothness or even melt.
Smooth out the still wet pile with the palm of your hand. When washing, it can fall off and become fluffy. After the cleaning procedure, the fur coat needs to be combed.
The pile must be air dried. But it is worth making sure that direct sunlight does not fall on the clothes.

A few more important points...

Do you want faux fur to look beautiful, be fluffy and not fall off? Just comb it regularly with a comb that has sharp, preferably metal, teeth. Similar procedure should be carried out very carefully, while trying to touch the ends of the villi without catching the base. It is not necessary to deepen the comb too deep into the fur.
If you often carry a bag over your shoulder or on your elbow, then in places where the strap rubs, the fur can be crushed and wiped off. When putting on a fur coat, give preference to bags that you need to carry in your hands.
Remember, you should not attach various pins, brooches and other jewelry to a faux fur coat.
Do not forget that faux fur does not like exposure to high temperatures. Do not store or dry products in the sun, near a heater or radiator. Also, do not use a hair dryer for this purpose.
It is forbidden to iron the fur or the lining of the fur coat.

Things made of faux fur look very presentable and capable of long time retain its original appearance. There is an opinion that it is easier to care for clothes made of synthetic material than for a natural counterpart. This is not entirely true, especially when it comes to fur coats. Only by knowing the basic rules of how to wash faux fur, you can be sure that the thing will last more than one year.

Disputes between supporters natural fur and the adherents of his substitutes will be eternal, and there is nothing left but, after weighing all the pros and cons, choose the most suitable option for yourself.

Emerging dilemma about whether it is possible to wash faux fur and things based on it, someone may confound, after all, after all, and the difference between natural material and factory textiles is quite essential.

Here are the main restrictions that are required observe, deciding to clean the product made of artificial material:

Textile material imitating animal fur is afraid of thermal effects. For this reason, care must be taken to synthetic fabric not subjected to strong heat, as this causes softening and deformation of the pile. Even if it does not start to melt, it will definitely lose its luster and smoothness.
Of course, no one canceled dry cleaning, but before taking the item to specialized organization, you need to make sure that it has a label that describes detailed information O acceptable ways cleaning.
We'll have to abandon the centrifuge and the electric dryer. Washed clothes can be neatly hung on hangers and then taken out to the balcony to dry naturally.
In things made of artificial material, unlike natural furs, the pile does not have a clear direction, so after washing it takes on a tousled look. While the thing is not dry, you can smooth it with your hand, and already dried - comb it with a brush.

White or light colored synthetic bristles turns yellow, if washed regularly, using aggressive detergents and rinsing badly. Unfortunately, bleach damaged thing is not so easy, and sometimes not at all.

preprocessing things

Having received a positive answer to the question whether it is possible to wash faux fur at home, proceed to preparatory stage. Immediately before washing a fur coat, vest or hat made of synthetic fur, the thing is cleaned of dust and other dirt. To do this, turn the garment inside out and knock out the dust using a regular carpet beater. Further, turning on the vacuum cleaner at minimum power and equipping it with a brush, they walk along the pile. This will thoroughly clean the surface of the product from dust and dirt particles.

Do not be lazy and ignore pre-cleaning, because the remaining dirt, when wet, will further pollute the artificial pile, and in some areas, even worse, glue it into strong lumps, which will most likely lead to a loss in product quality.

When the fur thing seems to be clean, but there are only a few spots on it that spoil the whole look, it is not necessary to wash it entirely, it is enough to clean the local areas. It is necessary to dilute the shampoo, some household detergent, or, at worst, prepare a soap solution and remove dirty stains. Then the sponge is moistened with water and wiped clean places with it. Now it remains only to comb the pile and dry it under a weak air jet of a hair dryer.

Features of hand washing

Any thing made of synthetic fur, be it a fur coat, a sheepskin coat or a vest, if it has a long pile, is washed by hand, but material with a short pile is allowed to be thrown into the washing machine.

When it becomes necessary to wash a medium-sized thing, for example, a hat or scarf, then, firstly, you should not pour too hot water into the basin, and secondly, you should not add dry washing powder or detergent containing active chemical components , because they can break the structure of the pile. For this purpose, ordinary liquid soap is quite suitable. IN extreme cases when you urgently need to wash a thing, and there is only washing powder at hand, large particles are separated from it and thoroughly dissolved in water.

If you have to wash a bulky product (fur coat, sheepskin coat), which, for obvious reasons, does not fit in a basin, it makes sense to prepare a soapy solution in the bath.

Then, after soaking the clothes for about 30-40 minutes, remove it from the container and carefully brush it over the damp pile with a soft brush, Special attention paying attention to the most contaminated places - sleeves, collar and pockets. After washing, the fur is carefully combed.

They change the water in the basin or bath, after which they begin rinsing, first with warm, and then cold water. The product is not wrung out until the bulk of the water drains from it. For this, some kind of stand is prepared in advance, where you can put a raw thing. Later, when the thing dries a little, it is blotted several times with a towel. It is strictly forbidden to twist the material.

Hangers are used for drying. It is important that clothes do not dry near heaters. Once the fur is dry, comb it with a round-toothed comb.

Using the washing machine

Those housewives who had to face the question of whether it is possible to wash natural fur and its artificial analogue need to know that machine washing of such things is permissible only if the household appliance supports a delicate mode, that is, the whole process takes place at a low number of revolutions of the drum and low temperature. It will be great if the washing machine also has a vertical load.

For washing, you need to purchase a mild detergent, since there are a lot of such products now. At the same time as a thing made of synthetic fur, you cannot wash other products, even from the exact same material.

Procedure for machine washing:

The item is placed in the tank. washing machine. If it provides for vertical loading, then first it is filled with water by 50% and is not turned on. Front loading models include a soak option.
After 10-15 minutes, the household appliance is transferred to the delicate wash mode. Soaking things for more than half an hour is fraught with the fact that the chemicals in detergents will begin to destroy the synthetic material.
Some washing machines have a gentle spin mode - this is just what you need in this case. But if there is no such function, you will have to manually remove excess moisture from the thing so that the drum does not wear out the pile. The main thing is not to overdo it, squeezing the thing with your palms.
After completing the wash, the thing is hung out in the bathroom and wait until the water drains from it. After that, it can be hung on the balcony, protected from direct sunlight, which can damage the fabric.
The final touch should be combing the pile. A soft brush with sparse teeth will do. Comb faux fur gently, without making sudden movements.

With the help of hand and gentle machine washing, you can cope with dust, light dirt and refresh the look of synthetic fur products. But whether it is possible to wash the fur of factory origin, namely, to remove stubborn stains from it, is not entirely clear.

Experts are in a hurry to please - and this is possible, but, of course, no one can give guarantees that the thing will regain its former appearance.

To remove old stains from synthetic fur items, you can use the following recommendations:

If you need to clean a collar or cuff that is heavily greasy from skin contact, you should mix a tablespoon of gasoline or alcohol with a small amount of potato starch, and then apply the resulting slurry to greasy spots, wait 15 minutes, then remove with a damp sponge.
There is nothing difficult in washing a hood from such fur. The easiest solution is to buy a special stain remover for synthetic materials. If this does not help, then the pile is treated with a cleaning agent in the form of an aerosol or foam. Together, these measures will allow you to clean the fur as much as possible.
Things are more complicated when you need to wash faux fur from a down jacket. Synthetic lining cannot be washed without a down jacket if it does not come unfastened. Then carry out dry cleaning with a brush and a surface stain remover. Good result gives cleaning with a cotton swab dipped in an alcohol-containing solution.
You can restore the previous color of white fur by trying to apply lemon juice diluted with water on it, but it will be extremely difficult to return the former whiteness in this way.

By adhering to elementary rules and practical tips, you can perfectly wash faux fur without even taking your favorite item to dry cleaning.

Attention, only TODAY!

Olga Nikitina

Reading time: 6 minutes

A A

Doing household chores, every housewife is faced with the issue of cleaning and washing a winter coat. But in this matter, you need to have an idea of how to properly clean a fur coat, and whether it can be washed at home. If visiting a dry cleaner is not possible, you need to enlist the wise advice of experienced housewives so as not to spoil expensive thing during home cleaning.

Is it possible to wash a fur coat (fur coat) at home?

As you know, before summer storage, fur products, including a fur coat, or a fur coat, need to be cleaned. But without knowing this process, you can easily ruin your favorite thing, because fur and fur products require a special, delicate approach. It happens that for some reason it is not possible to clean or wash a fur coat in a dry cleaner - then the hostess herself must take up the matter, having carefully studied this issue first. You can also wash a fur coat (fur coat) at home, but with very expensive fur it is still better to contact special ateliers.

First you need to decide on the object of washing. A fur coat is a fur coat, it can be lined or unlined, made of natural fur or artificial, short or long, sheepskin coat. The easiest way for a hostess at home, of course, is to cope with cleaning a fur coat made of faux fur. The instructions for each type of fur coat are slightly different - we will try to understand this below.

How to clean a fur coat yourself?

If the hostess still does not dare to wash her favorite fur coat, and the thing does not have a lot of dirt, then the fur coat can be cleaned at home without resorting to dry cleaning services.

White, light coat can be perfectly cleaned with refined gasoline. Before the procedure, it is necessary to shake the fur well in the air, then soft brush gasoline should be applied to the pile, stroking the growth of the fur. Places where there are stains on the fur coat can be wiped with a soft cloth according to the growth of the fur. Place the fur coat in a well-ventilated place so that the smell of gasoline quickly disappears.
Fur coat made of white, light fur, that has turned yellow over time can be cleaned with a weak solution of hydrogen peroxide. Dilute peroxide with water (for 1 cup of warm water - 1 teaspoon of hydrogen peroxide). Soak a foam rubber or natural sponge in this liquid, clean the fur of the fur coat with it, stroking the growth of the fur, then dry the fur coat. To make the fur shine, you can add 5-6 drops of ammonia to the liquid.
It must be remembered that very short fur on a fur coat or sheepskin coat is necessary brush against the growth of fur. They also clean a fur coat made of sheared mink.
You can clean the fur of a fur coat with hair shampoo(neutral, without balm, without color), diluted with water at the rate of 1 teaspoon per one glass of water. Wash the fur with a foam rubber sponge according to the growth of hairs. After cleaning, the fur must be wiped with a soft cloth dipped in cold clean water. After the procedure, the fur coat must be dried.
A fur coat laid out on a wide table can be clean with regular starch. Starch should be generously sprinkled on the fur, trying to get it between the villi. Then carefully comb the fur on the fur coat with a soft brush, combing out the starch. In the same way, a fur coat can be cleaned with semolina, fine bran, cornmeal, ground oatmeal.
A fur coat with long fur (fox, arctic fox, silver fox, etc.) can be cleaned using roasted oatmeal. Fry in a hot skillet cereals stirring well to heat them evenly. Then the flakes, still warm, sprinkle over the fur coats. Comb the flakes out of the fur with a soft brush with natural bristles. Finally, the fur coat must be gently shaken out in the open air.
After cleaning and drying, for the shine of the fur coat, it can be wiped in the direction of growth soft cloth dipped in glycerine. After this procedure, the fur coat must be combed with a soft brush, and then dried again in the shade.

What mistakes should be avoided so as not to spoil the fur coat when washing and cleaning:

Washing and cleaning a fur coat should not be done with a very hot water, as she can strongly "sit down".
Do not dry coat open rays sun, near heaters and heaters.
A fur coat should never be ironed, even from the side of the lining! When drying, the washed fur coat must be straightened on the shoulders, giving the original appearance. Wet mezdra perfectly takes the given shape, so the fur coat does not need ironing and steaming.
Drying a fur coat after washing, cleaning, and also when worn after rain and snow is necessary only on strong coat hangers, and not on ropes - it can be deformed.
If the fur coat is already quite old, its cleaning and washing should still be entrusted to dry cleaning, because the skin can suffer from water and detergents.

Marina: over time, the fur coat ceases to shine. You can restore the shine of your favorite fur coat if you wipe its fur once a month with a soft cloth, a sponge dipped in a solution of vinegar in water (alcohol, vinegar and water in equal amounts).

Ludmila: In order for the lining of the fur coat not to “suffocate” after washing and cleaning the fur coat, the fur coat must be dried in a well-ventilated place, turning it inside out several times a day, and then back - with the fur out. This will allow the lining to dry well.

Olga: To dry a fur coat after cleaning or washing, it can be dried on special device, which looks like a mop. On the crossbar of this "mop" it is necessary to wind dense and voluminous rollers of fabric - these will be "shoulders" so that the fur coat does not break on the shoulders. This crossbar should be attached to a rather long handle, which can be stuck into the ground, into a container of sand, into the neck of a wide canister filled with water.

Anna: A fur coat with very dense fur (yes, any fur coat, I think) can be cleaned with boric acid powder, which is sold in pharmacies. For a long zigey coat, 6-7 packs of powder will be required. The cleaning technology is still the same: sprinkle the powder on a fur coat laid out on a wide table, then comb out the boric acid natural brush. Boric acid gives shine to the fur, in addition - perfectly cleans it, and serves as a remedy against moths and skin beetles.

Maria: In order to clean and untangle long fur on a fur coat, you can purchase a brush for combing dog hair - it works great!

Tatiana: in addition to semolina and starch, it is good to clean a fur coat with pure table salt. The technology is the same - pour into fur, then comb through with a soft brush.

Where can I buy a new fur coat if you ruined the old one while cleaning the house - read.

NATA CARLIN

- soft, warm and beautiful. While new! However, any thing gets dirty over time, and some knowledge and effort are required to put it in order. This is especially true for things made of fur. Probably not every woman knows how to wash fur.

To understand this issue, you need to understand the difference between furs and fur itself. The category of furs includes short-haired types of skins of the following animals:

Sable;
Mink;
Seal;
Marmot;
Squirrel;
Muskrat.

Furs include processed mezdra:

Raccoon dog and raccoon;
Foxes;
Black-brown fox;
Arctic fox, etc.

As a rule, skins of long-haired animals are considered to be fur.

The main methods of cleaning fur are divided precisely into these categories.

Do not believe sources that claim that fur can be washed by completely immersing the product in water or a solution. No expert will advise you to do this. After all, natural fur should never be washed at home using a similar technique. In addition, if you do not trust other people's advice, take it to a good dry cleaner, where it will be cleaned quickly and efficiently.

Dry substances.(fur coats, hats) take dry powders:

Starch;
Oatmeal flour;
Small sawdust (except coniferous trees).

The method of using the funds is as follows:

The product must be folded into a large basin;
Sprinkle with dry matter so that it is evenly distributed over the entire surface of the thing;
With your hands, begin to crumple the material and shake the fur. Do this carefully so as not to damage the fur;
Now take the fur coat or hat out of the basin, hang it on a rope outside and gently shake off the remnants of the product.

Fine dry particles absorb grease, dirt and dust residues, and foreign contaminants.

Combing. For regular combing of furs, purchase a special comb. If you have not found such a tool on sale, use a regular massage. However, do not use the one that you comb yourself. Buy new thing. This is for your safety. Animal fur may contain a large number of pathogenic bacteria which, if in contact with your hair, will harm your health.
Sand. The fur of aquatic animals (otters, muskrats, beavers, sea otters) needs special cleaning. Fine river sand is suitable for them. Heat the sand in a frying pan to a temperature that the body tolerates. Spread a fur product on a flat surface and rub sand into it in a circular motion. Do not overdo it so as not to damage the fur.
Special combs. Fur cleaning is painstaking and long process. For it, special combs are used with long, medium frequency, teeth rounded from the middle. Wrap on each tooth thin layer cotton wool (fix with a regular thread), soak in a specially prepared solution, and comb the skin according to the growth of hairs. Suitable for cleaning solution ordinary water with soap, alcohol or kerosene. After the procedure, hang the thing on the street to dispel unpleasant odors.

Tip: Skins primary processing Do not wet clean under any circumstances. Distinguishing a good product from a bad one modern conditions market is difficult. Unscrupulous manufacturers and sellers are constantly trying to pass off low-grade raw materials as perfectly processed skins in order to sell at a higher price.

Therefore, choose things according to one, the most important feature - the smell. Solid, high-quality raw materials should not have it at all. None! Properly dressed skin does not smell.

If you clean the primary pelt with aqueous solutions, this will lead to irreparable consequences. In low-quality fur, a large number of bacteria have been preserved, which are activated in a humid environment, and simply “eat” in a matter of days. In addition, low-quality fur does not provide the necessary warmth, harms human health, and after a short time loses its aesthetic characteristics.

How to dry natural fur?

If you nevertheless carried out wet cleaning (not washing) of products from, try to dry the product properly. For a hat, prepare a blank made of wood with a diameter of up to 60 cm. Do not use three-liter jars, as our grandmothers did for drying mink molds. Wood is a hygroscopic material that absorbs excess moisture from the underside of the product.

A fur coat, jacket, sleeveless jacket or short fur coat made of natural fur is best dried on a coat hanger. Try to fasten the thing only from below. The top is best left unbuttoned. Leave the product in the air for three hours. After that, turn inside out, and leave for another 2-3 hours. Then re-hang the thing in front of you, and leave the fur to dry completely. Now comb the fur according to the growth of hairs with a massage brush.

The same goes for winter ups and downs with weather conditions when the hat and coat can get wet in the snow and rain. Observe one condition - do not hang a fur coat to dry next to heating appliances.

How to wash faux fur?

Most of the happy owners of beautiful and warm fur bedspreads do not know how to wash a blanket from. And, can it be done at all? For this category of fur products, the answer is unequivocal - you can! Wash short pile blankets by hand or in a washing machine. The washing temperature should not exceed 50˚. The product label must indicate the maximum possible temperature for each type of artificial fur. By turning on the unit on the delicate wash mode, you do not risk spoiling the thing.

However, it is necessary to rinse the blanket after the washing machine several times. To do this, add a fur conditioner or ordinary table vinegar to the first water.

To wash the item by hand, soak it first in warm water with detergent. Liquid soap is great for this, and shampoo is better. Do not wash the fabric as you are used to washing other fabrics. Remember it in your hands without rubbing. Rinse in several waters as indicated for machine wash. Do not press in the usual way. Lay the thing on a horizontal surface with a slight slope, let the bulk of the water drain. After that, lay a rag on the grate for drying clothes, lay out a fur product on it.

Change the cloth from time to time and straighten the thing. After drying, hang the product on a rope or hanger and ventilate it outside. Comb the fur in the direction of the hairs.

January 31, 2014, 11:06