Air technology cleaning. Air flow teeth cleaning (air flow): before and after photos. Is Air-Flow Dental Cleaning Painful?

Professional teeth cleaning Air flow- this is good way eliminate stone deposits and restore the enamel to its natural shade. This painless and safe procedure is performed in dental clinics. Air flow device

Air Flow system - what is it

When cleansing Teeth Air flow is used swiss apparatus. The essence of the method is that there is a treatment with a special therapeutic solution under balanced pressure. The product contains sodium bicarbonate and oxygen flow. It does not harm the enamel, because it consists of small particles. The device is equipped with two nozzles. Through the first, a solution of abrasive powder in water is supplied, through the second - an air jet.

Removal harmful substances, which exfoliate from the enamel, occurs with dental instruments that absorb food pieces and plaque. The specialist gently and meticulously cleans each tooth, eliminating harmful plaque. Cleaning can get rid of films with pathogens, and pathological granulations are eliminated from the periodontal pockets.

The equipment cannot remove the stone, it can only act on those deposits that have not had time to harden.

Abrasive powders are manufactured by EMS (Switzerland). They can have a variety of aromas and tastes. Products are also produced without fragrances, various additives and with a neutral composition. It is suitable for patients with personal intolerance to citrus fruits and allergic reactions. In total, there are 3 types of mixtures with different bases:

• classic;
• PERIO;
• SOFT.

Indications for cleaning

• In the presence of artificial structures– Implants, veneers, crowns and prostheses.
• As a preliminary stage of implantation, installation of crowns and filling of teeth.
• For problems with gums that have just begun to emerge. The procedure makes it possible to clean interdental hard-to-reach spaces, minimizing the risk of developing periodontal disease.
• In case of persistent plaque and formed tartar.
• With severe pigmentation of tooth enamel, as well as smokers.
• At incorrect closure teeth. Only Air Flow cleaning can gently remove dirt from the interdental space when there is a dense arrangement or twisting of the teeth.
• As hygiene care before removing the braces.

Contraindications to the procedure

The Air Flow technique is quite popular, but it has contraindications:

• individual intolerance to the components of the product;
• diseases respiratory system eg asthma and chronic bronchitis;
• allergy;
• thinning of enamel;
• kidney pathology;
• the use of drugs that regulate water-salt metabolism;
• strong inflammatory processes of the tongue, mucosa and periodontium;
• excessive sensitivity of the upper layer of enamel;
• advanced caries.

Teeth cleaning is not carried out during the period of bearing and feeding a child. Although the procedure is painless, due to the temporary accumulation of plaque in the mouth and the use medicinal solution can adversely affect the health of the unborn child.

How Air Flow teeth cleaning works in dentistry

The procedure for cleaning Air Flow using a sandblaster is carried out in several stages:

• Lubrication with Vaseline lips in order to prevent them from drying out.
• Placement under the tongue of a saliva ejector, which keeps the mouth dry. This is also necessary in order to avoid heavy salivation during the procedure.
• Putting on a special cap and goggles to protect the eyes and hair from the settling suspension of abrasive powder.
• cleansing in a circular motion each tooth. The dentist controls that the trickle of the solution does not fall on the mucous membranes and open areas of the dentin in the presence of caries and erosion.
• The dentist adjusts the pressure of the jet, acting on hard and soft deposits with different strengths.

Advantages and disadvantages of Air Flow teeth whitening technology

The main advantages of enamel whitening and microbial plaque removal with the Air Flow system include:

• The patient does not experience discomfort.
• Elimination of roughness of teeth and impeccable cleanliness of the oral cavity.
• Possibility of cleaning in hard-to-reach places and between teeth.
• Effective cleansing of microbial deposits, pigmented plaque and enamel.
• Elimination of many pathogens that provoke the formation of caries and various infectious inflammatory processes in the mouth;
• Possibility of whitening at least 2 tones;
• No traumatization of the upper dentin.
• The availability of cleaning the root parts of the teeth in periodontal pockets, which makes it possible to carry out effective treatment periodontal disease and achieve remission of the disease.
• Non-toxicity of the agent used.

How often should you brush your teeth with airflow?

Air Flow professional teeth whitening is not recommended more than once every six months.

Like any other procedure, it also has disadvantages:

• You can not achieve radical clarification. The procedure allows you to restore only the natural shade of enamel, which is individual for each person.
• Inability to remove tartar. Air Flow can only handle soft deposits.

Which is Better: Air Flow or Ultrasonic Teeth Cleaning?

Airflow cleaning is safe procedure because a sandblaster is used to remove deposits and residues from crevices air flow and a jet of abrasive solution. BUT ultrasonic cleaning involves the use of ultrasonic waves that destroy deposits, plaque and tartar using a certain frequency of oscillation.

Thus, Air Flow implies thorough cleansing, and ultrasound full serious cleaning. Each of the methods differs not only in the way of influence, but also in the depth of purification. Which method to choose is determined individually by the attending dentist.

In the process of cleaning the teeth, Air Flow removes the organic film that covers the tooth. A new film of saliva is formed within 2-3 hours. After this time, you can return to your normal lifestyle. In the first hours it is forbidden to smoke, and within 2 days after the procedure do not use coloring:

• drinks - juices, red wine, coffee, tea and others;
• products - berries, mustard, soy sauce, beets and so on.

The first two days can be saved high sensitivity teeth from hot and cold irritants at the cutting edges and cervical part of the teeth, as well as an increase in mobility. In this case, gels that saturate the teeth with minerals can come to the rescue.

You should carefully listen to the advice of your doctor regarding oral care after Air Flow. Need to be replaced old brush, on which bacteria will definitely remain, and use a mouthwash.

It is advisable to discuss the frequency of subsequent sessions with the attending dentist, taking into account the lifestyle, body characteristics, the presence of bad habits. Regular professional cleaning Air Flow makes it possible not only to clean the teeth from plaque, but also to prevent the consequences that it causes. Similar preventive measure will solve aesthetic problems and maintain healthy teeth and gums.

Toothbrush - excellent tool to clean the mouth, but sometimes it is not enough. A snow-white smile will adorn any person, no wonder that many seek to get it.

It has the following properties:

• Evens out damage and fills microcracks on the enamel surface
• Effectively removes plaque and prevents the formation of caries
• Restores natural whiteness, smoothness and shine to teeth

Indications and contraindications for Air Flow

Indications for use

1. The presence of tartar, plaque and pigmentation of tooth enamel.
2. predisposition to or initial stage(upon agreement with the doctor).
3. To prepare the teeth for the whitening procedure, it is recommended to first carry out purge Air flow.
4. To remove marks from tooth enamel prolonged wear braces.

Contraindications

The procedure has a number of limitations, so a preliminary consultation with a dentist is necessary. Well-known contraindications are asthma, periodontal disease, complex forms of beriberi and hormonal disruptions due to dieting. Can't brush teeth during pregnancy and lactation.

Preparing for the Air Flow procedure

First of all, you have to go preventive examination dentist. Your doctor may also recommend a cleansing procedure after scheduled inspection if it detects plaque and other indications. The cleaning powder may have a menthol or citrus flavor, so if you have an allergy or excessive sensitivity to the components, you should tell your doctor about it.

It is not necessary to apply makeup before the procedure, because the particles of the cleanser get on the face when sprayed and after completion it will be necessary to wash.

How to behave after the procedure:

1. Refrain from eating and drinking for two hours.
2. Do not use coloring drinks and fruits (coffee, tea, beets) for several days and do not injure the oral cavity with hard nuts and seeds.
3. Buy toothpaste recommended by the dentist.
4. For several days, you should rinse your mouth with a solution of soda, a decoction of chamomile.

Many patients complain of excessive sensitivity, discoloration of the enamel and caries. Toothpaste with a filling effect does not thin the enamel, but, on the contrary, strengthens it as much as possible.

Thanks to hydroxyapatite, it firmly seals microcracks on the enamel surface. The paste prevents earlier tooth decay. Effectively eliminates plaque and prevents the formation of caries. I recommend.

Service price

Air Flow is an oral hygiene maintenance treatment that is an advanced version of chemical polishing and tartar removal. The composition of the cleaning agent contains the smallest soda granules that do not injure the enamel. The price is lower compared to other cleaning methods.

The average cost in St. Petersburg dental clinics is about 1 800 rubles.

Patient reviews on the advantages and disadvantages of the Air Flow procedure

O clear benefits This manipulation is evidenced by the fact that tooth enamel is lightened by several tones. The technology of hygienic cleaning of the oral cavity has a number of disadvantages for some patients, they should also be mentioned.

Advantages:

1. Safe removal of pigmentation from tooth enamel from exposure to dyes, which leads to the systematic use of red wine, coffee, tea, beets, some berries, smoking.
2. Manipulation is performed without anesthesia because it is absolutely painless. Mild discomfort occurs the first two days after the procedure only in people with too sensitive enamel. This problem is easily solved by using a local anesthetic.
3. Compound medical device used for the procedure is not a chemical, therefore, does not harm tooth enamel, which cannot be said about the whitening procedure.
4. The Air Flow procedure is also a preventive measure dental diseases(caries, periodontitis).
5. Deep cleaning of the periodontal canals which eliminates the unpleasant smell.
6. At the end of the procedure tooth enamel varnished, which provides additional protection.
7. Medical manipulation will not take much time, it is made within half an hour.

Flaws:

1. Air Flow does not give a radical whitening effect, tooth enamel will retain its natural yellowish tint. Dazzling whiteness will be provided only by chemical bleaching, the preparation for which is also the Air Flow cleaning procedure.
2. Tartar ( hard plaque) with great difficulty lends itself to jet action cleaning agent, while the soft is removed from the most inaccessible places.
3. Obstructive respiratory diseases, as well as periodontal disease, are a contraindication to the procedure.
4. Airflow cleaning is an alternative to whitening safe method impact on tooth enamel, but precautions must also be taken to avoid damage to gum tissue and the oral cavity.
5. If the natural yellowish tint haunts and really creates visual discomfort, then more effective procedure will be laser correction or photobleaching, for example,.

1. No need to panic, manipulation is painless. And don't expect snow-white smile. The result will depend on the natural shade of the enamel.
2. It is better for girls to refrain from using cosmetics when going to the procedure.
3. Within a few hours after the procedure, the gums may bleed, so you should prepare a decoction of herbs for rinsing and toothpaste (or a gel to relieve swelling, such as Metrogyl) in advance.
4. Allergy sufferers should be careful.

What is the difference between Air Flow and whitening?

The effect of this procedure depends on the natural shade of the enamel, but it differs from chemical bleaching. The technique is called whitening, because it cleans a large area of ​​the tooth surface (including in hard-to-reach places), therefore, the reflective effect increases and the enamel brightens.

In addition to cosmetic, it works psychological effect. Cleaning can be a full-fledged replacement for whitening, so Air Flow clinics present it as an alternative natural effective whitening of tooth enamel.

TECHNICAL MODIFICATIONS

Sandblaster Air-Flow handy-2

tip for polishing and removing soft deposits

EMS reserves the right to change the technology, accessories, operating instructions or contents of the device due to technical or scientific improvements.

COMPONENTS

(1) Tip

(2) Charging chamber cover

(3) Housing

(4) Connector

(5) Powder outlet pipe

(6) Water outlet

(7) Spigot

(8) Top ring

(9) Cover cap

(10) Charging chamber seal

(11) Charging chamber

(12) Rear tube

(13) Front tube

(14) Tip connector

(15) Large sealing ring for tip connection

(16) Small o-ring for tip connection

(17) Needle bar

(18) Large cleaning needle

(19) Small cleaning needle

EMS supplies devices with various accessories. The "Packing list" indicates the exact configuration of your device.

DEAR CLIENTS,

Thank you for purchasing the new EMS product. It meets the highest quality and safety standards.

Mounted on the turbine connection of your dental unit, the AIR-FLOW ® handy 2 + air polisher works together with AIR-FLOW ® Prophylaxis Powder and 3M ESPE Clinpro TM Prophy Powder.

Holding the powder in the water jet allows you to direct the water jet with great precision and thus makes the treatment enjoyable for your patient.

This device removes dental plaque, soft deposits and surface stains from cavities, grooves, interproximal distances or smooth surfaces of teeth.

Plaque removal for placement of filling materials

Surface preparation before bonding/cementation of dental fillings, onlays, crowns and outer layers

Surface preparation prior to application of composite repair compounds

Effective plaque and stain removal for orthodontist patients

Cleaning before placing orthodontic braces

Cleaning the implant mandrel before loading

Removing stains to determine shade

Plaque removal before fluoride treatment

Removal of plaque and stains before whitening

PLEASE READ BEFORE WORKING!

This instruction manual ensures the correct installation and use of this product.

Please read this instruction manual carefully as it explains the most important information and procedures. Please pay attention Special attention for precautionary measures.

Always keep this manual at hand.

Please pay attention to the relevant warnings and notes to avoid personal injury and property damage. They are marked as follows:

Danger

Injury risk

Attention

Risk of property or environmental damage

Please pay attention

Useful Additional Information and advice

Forbidden

Allowed

ASSEMBLY AND SETUP

Water supply

P<= 0,7 бар (< 700 гПа)

Max. 40°C

Compressed air supply

Set the pressure of your installation to the maximum value allowed by your turbine so that the operating pressure is between 3.5 and 4.5 bar (3500-4500 hPa).

Use only dry and clean air (no oil).

Turbine connection check

The device is equipped with an adapter specifically designed to connect to the turbine of your dental unit. Only use the device with this special turbine connection. Connecting with another type of turbine will damage it.

The turbine of your dental unit must not be pressurized when the device is connected. Do not turn on the turbine footswitch. If your turbine is equipped with a light, turn it off.

Make sure the o-rings on your turbine connection are in good condition. Turbine connection with O-rings in poor condition can damage the device.

Connection to the dental unit

Turbine connection and connector must be absolutely dry. Moisture on the connection can block the air/powder passages of the device.

Setting the water flow rate

It is easier to set the water flow rate before using the device for the first time when the charging chamber is empty.

Bring the tip up to a distance of 20 cm above the sink. Adjust the flow rate of the water from your handpiece in order to achieve a uniform spray.

Filling the charging chamber

Do not keep the device pressurized while loading the powder.

Make sure the charging chamber is completely dry. Moisture can cause the powder to caking.

Use only original EMS AIR-FLOW ® Prophylaxis powder or 3M ESPE Clinpro TM Prophy powder.

Do not exceed "max." size.

Tube openings should not be covered with powder. Tube blockage may occur.

Closing the lid

Before screwing on the cap, clean the threads of the charging chamber.

Do not shake the device before starting treatment. Shaking the powder may clog the tubes.

HANDLING AND ADJUSTING THE WATER/AIR SUPPLY

Familiarize yourself with the use of the device by cleaning a yellow coin or an extracted tooth.

You can modulate the result given the adjustment:

Increasing the air pressure increases the cleaning effect and reduces the polishing effect.

Increasing the water flow rate increases the polishing effect and reduces the cleaning effect.

GENERAL TREATMENT ADVICE

basic information

Contraindication: Under no circumstances should patients suffering from chronic bronchitis or asthma be treated with the air polishing device. The jet of air and powder can cause breathing difficulties.

Contraindication: Patients on a low salt diet should not be treated with AIR-FLOW ® Prophylaxis Powder as it contains bicarbonate of soda. Use 3M ESPE Clinpro TM Prophy Powder for Patients Who Prefer to Eat Low Salt

In some cases, the lemon flavor of EMS AIR-FLOW ® Prophylaxis powder may cause an allergic reaction. If patients are known to suffer from such reactions, use unscented AIR-FLOW ® Prophylaxis Powder.

Do not direct the jet of powder at fillings, crowns and bridges as this may damage the restored teeth.

EMS AIR-FLOW ® Powder can only be used when applied above the gum. For subgingival use, please use 3M ESPE Clinpro TM Prophy powder and refer to the instructions for use.

Wear a mask and eye protection

To prevent powder from getting into the eyes under contact lenses, the person who wears such lenses should remove them.

A jet of powder accidentally directed into the eye can cause serious injury to the eye. During treatment, we strongly recommend that all relevant persons, such as the dentist, hygienist and patient, wear eye protection.

To limit the risk of bacterial and viral infections and powder inhalation, we recommend that the dentist and hygienist wear a protective mask.

The patient's contact lenses or glasses may become contaminated during treatment. We recommend removing them.

Washing the patient's mouth

Applying lip cream

Soft tissue protection

Rinsing the patient's mouth for at least 30 seconds with BacterX ® pro* solution significantly inhibits bacterial growth during treatment

The fleece stops salivation, separates the lips and protects the gums.

Saliva ejector installation

Placement and use of the device

Place the pump in such a way that suction is performed from under the tongue.

Use your dental unit's high speed suction pump to remove the air/powder mixture deviated from the tooth being treated.

The same operator must always handle the device and the high speed suction pump. In this case, the high-speed suction pump is optimally positioned in the direction of the nozzle.

WORK METHOD

Point the nozzle strictly directly to the tooth surface. Keep a distance of 3 to 5 mm.

You can change the angle between the tip and the tooth from 30 to 60 degrees. The more developed the angle, the larger the cleaning area.

During treatment, direct the high speed pump towards the direction of the air/powder jet deflected by the tooth. The angle of reflection is identical to the angle of incidence.

The air/powder jet is powerful. It can harm the gums or cause emphysema due to air being trapped in soft tissue areas. It is strongly recommended that the operator never point the nozzle directly at the gum tissue or into the gingival sulcus.

During treatment, make small circular movements.

At the end of the treatment, polish all gum surfaces by setting the maximum water flow rate.

Precautions taken at the end of treatment

When you take your foot off the control pedal, the air/powder jet will continue for a few more seconds.

You can finish the treatment with these seconds.

When the handpiece is in the patient's mouth, you can insert it into the high speed suction pump. Give the device some time to release pressure without risking injury to the patient's mouth.

Application of fluorine

After the end of the procedure, the patient can carry out the final rinse.

After the procedure, there is practically no mucin left on the teeth. In this regard, the topical application of fluorine is recommended. It is important to use colorless fluoride.

Information for the patient

After the procedure, the teeth are clean and the tooth cuticle is completely removed. Its recovery with the help of proteins in saliva requires 2 to 3 hours. During this time, the teeth no longer have any natural protection against acquiring color.

Inform your patient that for 2 to 3 hours after the procedure, he should neither smoke nor consume food or drinks that can significantly stain the teeth (tea, coffee...).

disinfection, cleaning and sterilization

Cleaning the device

The device should only be cleaned with an alcoholic commercially available and colorless disinfectant (ethanol, isopropanol). Using scouring powder or an abrasive sponge will damage its surface.

Do not place the device in a disinfectant bath as there is a risk of damaging it.

The device is not protected against water spray. It cannot be sterilized.

Tip cleaning

Remove any remaining powder in the tubes with cleaning needles. Be careful not to use force as the needles break easily. Use only the tools provided to you.

Disinfection and sterilization of the handpiece

Only the tip can be immersed in the disinfectant bath.

Before sterilization, rinse the disinfected handpiece in running water.

After use, always sterilize the handpiece by autoclaving only at 134°C (135°C maximum) for at least 3 minutes.

For sterilization, please refer to the regulations in your country.

Drying and connecting the sterilized handpiece

Moisture may remain in the handpiece after sterilization. It is necessary to blow out the inside of the handpiece with compressed air in order to avoid the formation of powder deposits in the air tubes.

Make sure the tip connection is dry.

Attach the tip.

REGULAR CLEANING AND
CONTENT

Clean the charging chamber regularly.

Empty the charging chamber. Use the dental unit's high-speed pump to suck out any remaining powder.

Use a needle to clean the holes and the inside of the tubes.

Clean the charging chamber threads with alcohol (ethanol, isopropanol).

The lid should be cleaned and disinfected regularly. First rinse it with water, then disinfect it with alcohol (ethanol, isopropanol).

You can dismantle the hood for easier cleaning.

The cap must be correctly placed on the cap ring. The ribs of the cap must be aligned with the lugs of the ring. The two parts must be properly aligned to prevent leakage and build up pressure.

The cover and its seal must be replaced at least once a year.

The lid must be completely dry.

Check the condition of the threads of the charging chamber and cover. The charging chamber is pressurized during use. The condition of the charging chamber and cover (ring and cap) is an important safety factor.

Replace defective parts immediately.

SECURITY MEASURES

EMS and the distributor of this product accept no liability for direct or indirect injury or damage resulting from misuse, such as failure to follow these instructions for use, improper preparation and maintenance.

Use only for the intended purpose. Before using the product, make sure you have read and understood the instruction manual. This also applies to any equipment used with this product. Failure to follow the instructions for use may result in serious injury to the patient or user, or the product may be damaged and possibly unrepairable.

This product should only be used by trained and qualified personnel.

Always check the device for damage before starting treatment. Damaged accessories or a damaged device must not be used and must be replaced. Use only original EMS spare parts and accessories.

This device should only be repaired by an authorized EMS repair center.

Before each use, it is necessary to disinfect, clean and sterilize the various parts and accessories of the device. Pay attention to the information provided in the instruction manual. Non-sterile parts and accessories may cause bacterial or viral infections.

EMS AIR-FLOW ® Prophylaxis Powder and 3M ESPE Clinpro TM Prophy Powder are specially formulated for use with the device. Do not use powders from other manufacturers as this may damage the instrument or may adversely affect its performance.

Never use EMS Abrasive Powder in the device as this will damage the device.

STORING THE DEVICE NOT USED FOR LONG TIMES

Keep the original packaging until the final disposal of the device. You can use it when transporting or storing your device at any time.

If you want to preserve your product for a long time:

Proceed as described in the chapter "Disinfection, cleaning and sterilization"

Pack the device and all accessories in the original packaging

Storage and transport conditions are described in "Technical data".

Do not store powder near acids or heat sources.

DISPOSAL OF DEVICE, ACCESSORIES

The device, its accessories and packaging do not contain any substances hazardous to the environment.

If you wish to dispose of the product permanently, please follow the regulations in force in your country.

GUARANTEE

The warranty will be valid for one year from the date of purchase of your device and accessories.

The warranty does not cover damage due to non-observance of the operating instructions or wear of parts.

Accessories

Accessories are available from EMS or any authorized dealer. Please contact the customer service department that deals with you directly.

EMS SERVICE

If your product requires additional service or repair, please refer it to your dealer or your authorized EMS repair center.

EMS does not accept any responsibility in case of repair by unauthorized persons or damage due to non-observance of the operating instructions. This also voids the warranty.

It is best to send your device in the original packaging. It will protect it from damage during transportation.Before shipping your device, including all accessories, please clean, disinfect and sterilize as described in the instruction manual.

The connector should only be disassembled or replaced by an authorized EMS repair center.

You may only request modifications to the machine's adapter type to the extent available to your authorized EMS repair center.

When you send your device directly to your authorized EMS repair center, please include the name and address of your dealer. This will make the processing easier for us.

SYMBOLS

Manufacturer logo

Sterilizable in autoclave up to 135°C

Attention! Read the instruction manual

CE Marking: Refers to Directive 93/42 EEC, including EN 60601-1 and EN 60601-1-2

TECHNICAL DETAILS

TROUBLE-SHOOTING

Airflow brushing is perhaps the most popular method of professional oral hygiene. It has a high cleaning quality and is the best way to prevent common dental diseases. Many procedures, such as fillings and orthodontic treatment, are performed only after.

By choosing Air Flow teeth cleaning, you can solve a whole range of problems at once: gentle removal of deposits, lightening of pigmented areas and polishing of tooth enamel. In this article, we will tell you everything about Air Flow technology: how hygiene is done, what are the contraindications and features of the procedure, what is not allowed after brushing your teeth, and much more.

What is Airflow?

Air Flow teeth whitening is based on the principle of treating enamel with a fine mixture of water, air and sodium bicarbonate from a sandblaster. The spherical shape of the hard particles and high pressure combine to provide a gentle polishing effect. One of the components (sodium bicarbonate) is more familiar to you as ordinary baking soda, but it is simply impossible to achieve this effect using it at home. Hygienic cleaning takes about an hour.

The Air Flow allows you to clean not only the front side of the teeth, but also the most hard-to-reach areas. This procedure can be performed even after veneers or crowns have been placed. Air Flow has proven itself to be the best professional hygiene for keeping teeth in perfect condition.

System advantages

The popularity of Air Flow brushing among dentists and their clients is not accidental. This technique has objective advantages that are difficult to dispute. Let's consider only some of them.

1. Air Flow allows not only to perfectly clean the enamel, but also to slightly whiten it. Due to the 100% removal of plaque and pigmentation, the teeth acquire their natural natural shade. Thanks to cleansing, tooth enamel becomes lighter by an average of 2 tones. Air Flow whitening gives a pleasant aesthetic effect.
2. The mixture used to polish enamel is completely safe for health. It does not injure the tissues of the teeth and gums. Only a superficial effect appears, penetration into the structure does not occur. It is because of this that the number of contraindications to the Air Flow cleansing behavior is minimal compared to other similar procedures.
3. Professional cleaning does not deliver any painful or even unpleasant sensations at all. The nozzle of the device is directed only to hard tissues, which are completely insensitive to physical impact.

Thanks to these advantages, professional teeth cleaning by the Air Flow method is widely used in dental practice. The cost of the procedure is quite democratic, the average price is in the range from 2 to 3.5 thousand rubles. How teeth are cleaned in the dentist's chair, you can see in the photo.

This technique can be called universal, as dentists recommend it in a variety of cases. The most common indications for cleaning:

• lightening pigmented areas after removing braces;
• cleaning teeth from plaque and stains resulting from coffee, strong tea or smoking;
• quality prevention of periodontal disease;
• preparation of enamel for further whitening.

Professional cleaning using the Air Flow method is often used by dentists to prevent the formation of caries in people with. The absence of gaps reduces the quality of self-hygiene, as a result, plaque accumulates, and the destruction of tooth enamel begins. Periodic professional cleaning helps to avoid further problems with the teeth.

Procedure technique

To bring even greater clarity to the mechanism of action, consider the approximate technique of the procedure. In any dentistry, cleaning is done in approximately the same way. There are minor differences, but they are not significant.

1. Your doctor will suggest that you wear a cap and goggles to protect your hair and eyes from dust particles.
2. So that you do not experience discomfort from drying out the lips, Vaseline is applied to them.
3. A saliva ejector tube must be placed under the tongue.
4. The doctor turns on the device and, directing the nozzle at an angle of 30 to 60 degrees, begins processing the enamel, avoiding contact with the gums, dentin and root cement.
5. Each tooth is treated separately with gentle circular motions.
6. After cleaning, the teeth are covered with a protective varnish.
7. The dentist gives advice and recommendations after brushing regarding dental care over the next few days.

The whole session takes about an hour, after which you can enjoy the impeccable cleanliness of your teeth.

Who is not suitable for cleaning?

Due to the fact that there is no penetration into the structure of the teeth, and all components are completely safe for humans, there are practically no contraindications. It is recommended to refrain from using this method only in three cases:

• with diagnosed bronchial asthma;
• during pregnancy;
• with a severe allergy to citrus fruits.

After cleaning, doctors strongly recommend that you refrain from drinking any drinks and foods that can stain the enamel of your teeth for at least 3 hours. The same goes for smoking. Even better, if you give up all of the above for a few days.

In this article, we have told you everything you need to know about the Air Flow technique. In conclusion, we suggest you watch a useful video in which you can listen to the opinion of a professional dentist about this procedure and get a visual representation of its implementation.