Possibilities of digital technologies. Clinic of functional and minimally invasive dentistry Dr. Grishina S. Yu

Moscow, st. Mishina, 38.
m.Dynamo. Get out of the 1st car from the center, exit the metro, in front of you is the Dynamo stadium. Go left to the traffic light. By pedestrian crossing go to opposite side Theater alley, go a little forward. Stop on the opposite side. Get on bus number 319. Go 2 stops to "Yunnatov street". Cross to the opposite side of the street. To your left is the porch - the entrance to the EspaDent clinic. You're at the place!

Moscow, st. Academician Anokhin d.60
Exit the first carriage from the center towards "Akademika Anokhin Street". From the glass doors to the right. Along the forest (on the right hand) along the path about 250m. to st. Academician Anokhin. Cross to the opposite side of the street and go right, about 250m., to house number 60. The house has the penultimate entrance, a sign "Teeth in 1 day". You're at the place!


Get off the subway at st. Savelovskaya (the first car from the center). Go to the end of the underground passage and exit the metro towards Sushchevsky Val Street. Go past the Uncle Kolya restaurant. Pass under the flyover, then follow the underpass to the opposite side of the street. Novoslobodskaya. Continue walking along Novoslobodskaya street for about 200m, past the Elektrika store. On the ground floor of the house number 67/69, there is a restaurant "Traktir". Turn right, in front of you is a sign "Teeth in 1 day", go up to the second floor. You're at the place!

Moscow, st. Novoslobodskaya, 67/69
Get off the subway at st. Mendeleevskaya (the first car from the center). Exit the subway towards the street. Lesnaya. Go along st. Novoslobodskaya from the center towards the street. Lesnaya. Cross the streets: Lesnaya, Gorlov blunt., Ordinal per. Come to the intersection of St. Novoslobodskaya with Corner lane. Cross the lane, there is a building in front of you, on the facade there is a sign "Teeth in 1 day". You're at the place!

Moscow, st. Academician Koroleva, 10
From the metro you will reach in 15 minutes. 4 minutes to the tram, 5 minutes by tram and 3 minutes to the clinic. 1st car from the center. Get out of the metro, walk to a tram stop and 4 stops on any tram, to Ostankino. Come out and return along the park to the road, go to the left 80m and see the sign "Center Surgical Dentistry". You're at the place!

Moscow, From monorail st. st. Academician Queen
Leave the station and follow the street. Academician Koroleva (after left hand), go through the Megasphere store to the intersection with the road. Turn right and go past the forest park to house number 10. On the facade there is a sign "Center for Surgical Dentistry". You're at the place!

dental clinic"Mirodent" - Odintsovo, st. Youth house 48.
From Art. Odintsovo buses No. 1, 36 or minibus No. 102, 11, 77 - 2 stops to the stop "Tower". From metro station Park Pobedy: bus number 339 to the stop "Tower". The clinic is located on the 2nd floor of the business center.

Balashikha, Vishnyakovskoe highway, 31

On foot:
From the Nikolskaya platform on the left side of the Vishnyakovskoye highway 9 minutes. After crossing 3rd line street you will see Dixie. Behind it is a 3-storey olive building - our dental center.

By transport:
From the platform Nikolskaya Bus 22 or Minibus 1123, 22k, 9k along Vishnyakovskoe highway one stop to the stop "3rd line". Across the street is a 3-story olive-colored building that is our dental center.

Digital dentistry CAD-CAM used in prosthetics and micro-prosthetics of teeth, providing the highest accuracy, and as a result, the comfort of the design. Another indisputable advantage of the method is minimum time waiting for the finished prosthesis. In most cases, Dental Brothers patients have time to drink a cup of tea - and their prosthesis or microprosthesis is already ready for installation.

Features of digital dentistry CAD-CAM

  • CAD-CAM is computerized modeling and computerized fabrication of prosthetics directly in the dentist's office, without the need to involve the forces of autonomous dental laboratories.
  • Working with the CAD-CAM system at the first stage involves the use of a digital intraoral scanner that reads information about anatomical features dentition, oral cavity, facial skull. Based on the data obtained, the computer simulation program will develop a project for a prosthesis or micro-prosthesis, which will be ideal for correcting a specific clinical case.
  • "Project" information is digitally transmitted to an electronic milling machine, which, without human intervention, grinds a crown, veneer or inlay. This equipment works with a wide range modern orthopedic materials - solid ceramics, titanium, zirconium.

Made by CAD-CAM technologies the prosthesis does not need preliminary fitting or adjustments: it is guaranteed to be comfortable and correspond to the anatomical parameters as accurately as possible. Ready orthopedic structure all that remains is to fix it on the prepared base, and the restoration or correction of the shape of the tooth will be completed during one appointment with the doctor.

Of particular importance CAD-CAM system has in the field of implantology: prosthetics on implants has now become faster and even better. When installing an implant with an instant load, the patient is immediately implanted with an implant and an hour later a crown machined on digital equipment is installed on it. Having come to the clinic with a missing tooth, the patient leaves the doctor with a design that will last him a lifetime.

Dental treatment and prosthetics at the Dental Brothers clinic

The Dental Brothers digital dentistry clinic invites you to diagnose, treat and restore teeth using high technologies. We guarantee that you will solve any problem quickly and efficiently: within one visit, modern veneering is performed, inlays for restoration are installed, permanent crowns are machined and fixed. More information about the possibilities of CAD-CAM technology can be obtained directly at the appointment with the orthopedists of our clinic. An appointment for a consultation is made by phone or through a special form on the Dental Brothers website.

Now all areas of medicine are actively developing: new drugs and technologies are being created to help patient and rapid treatment of the disease. In dentistry, digital devices are actively used, with the help of which diagnostic measures and models are being developed for further implantation of teeth.

Our clinic is equipped with everything necessary equipment For complex treatment patients, including digital device CAD/CAM. It allows you to first design a 3-D model of a crown or veneer, then create a product using a milling block. We use it for preliminary diagnosis oral cavity before such procedures:

· Restoration and restoration of teeth;

Regular and basal dental implantation;

Reconstruction of the dentition.

Working with a digital CAD/CAM machine is as follows:

1. The specialist takes an impression of a destroyed or dilapidated tooth;

3. After that, the milling unit uses the obtained 3-D model to make a natural crown, which is subsequently fixed in the patient's oral cavity.

The digital CAD/CAM machine makes it possible to create a comfortable crown or veneer as quickly as possible.

Digital Dentistry is dental treatment using the most modern technologies. Most often, various digital achievements are used for prosthetics. At Dr. Davtyan's implantology center, we actively use the cadeny iTero intraoral scanner and the Easyshade Advanced system.

iTero

iTero CAD/CAM Scanner makes results orthopedic dentistry as accurate as possible - both at the time of planning, and at the time of manufacture and installation of the structure.

Using a scanner Cadent iTero can make digital impressions, i.e. direct mapping of oral tissues on a computer. At the same time, work using CAD / CAM technology allows you to easily create prostheses based on these impressions using technical milling machines.

Benefits of Cadent iTero :

    You can fully control the preparation of the tooth stump in the mouth. The scanner allows early stage detect, for example, undercuts, and eliminate them in time, even before the manufacture of an unsuitable prosthesis. It will also significantly reduce repeat visits to the dentist;

    When you immediately convert the scanned prosthetic bed into digital format, there are no errors typical for classical impressions: pores, braces, inaccurately taken borders, etc. As a result, the technician receives a 100% correct model;

    The closing of the teeth can be registered as accurately as possible, without errors from silicone masses or wax.

Easyshade Advanced 4.0

In prosthetics, it is very important to accurately determine the color of the tooth. This is done according to the VITA color standard. It is very important to determine the color independently of the ambient light and without errors, which is only possible when applying digital technologies. Therefore, at Dr. Davtyan's Implantology Center, we use Easyshade Advanced for this purpose.

It has a number of advantages:

    Speed ​​and accuracy;

    High mobility of the device;

    Ease of work;

    The most accurate data on the color of the tooth according to the VITA scale;

    High quality control and color matching of restorations.

Digital Dentistry at Dr. Davtyan's Center

Thanks to digital technologies, we can carry out procedures even more accurately at the Implantology Center of Dr. Davtyan. All of our doctors are digitally trained and highly qualified, allowing them to treat even the most complex clinical cases quickly and comfortably for the patient. Choosing our center, you get convenience, comfort and quality treatment.

Similar posts