Composite braces are invisible and aesthetic designs. Avalon braces What makes them special

Not so long ago, people did not seek to correct bite defects due to the bulkiness and unsightliness of braces, and sought help only for severe violations.

Now orthodontists for patients can offer a choice of several options for corrective devices, which differ in price, type of fixation and material of manufacture.

The most popular are aesthetic devices, including composite braces.

General view

Composite braces are one of the budget options for aesthetic orthodontic systems. Their aesthetics is ensured by the possibility of selecting the color of the material as close as possible to the natural tone of the patient's teeth.

Externally, the composite construction does not differ from expensive ceramic braces. Also, a pattern can be applied to each lock, which is often used when adjusting the position of teeth in children.

Models are made only individually from a polymer composite, which differs from conventional plastic in improved aesthetic performance, increased strength.

The lock is equipped with a metal groove, which reduces the load on the jawbone, as the arc slides freely.

The base of the bracket is metal, made in the form of a mushroom-shaped mesh. This configuration is needed to create high-quality adhesion to the tooth surface.

At the beginning of treatment, a thin arc is usually placed, which after a while is replaced by a more rigid one. Additional elements of the corrective apparatus are rods, springs, rings and elastic chains.

To fix the braces to the enamel coating, only special glue is used, which allows you to save the overall aesthetics of the smile and the device itself.

The design feature is the possibility of using two types of fixation on the teeth:

from the lingual side, i.e. located between the tongue and the inside of the teeth;
from the vestibular surface, facing the vestibule of the oral cavity (for chewing elements - this is the buccal surface, and for the frontal - the labial).

Most often, this design is used to correct minor defects in the dentition, or to correct the bite in children.

Pros and cons of devices

Composite braces are widely used in orthodontics. But, like all existing models of bite-correcting devices, they have some disadvantages and advantages.

Among the advantages of this device, experts note the following indicators:

Democratic value(especially when compared with ceramic or sapphire models).
Sufficiently wide range of shades of the material, which allows you to very accurately match the color of the plates to the enamel.
Resistant to breakage and chipping due to the plasticity of the material.
Preservation of the original form the entire course of correction, which allows the patient to practically not change the usual diet.
Safety. The tongue, gum tissues, cheeks and palate are not injured by the elements of the device due to its streamlined shape.
Hypoallergenic. Does not cause allergies and does not emit toxic compounds.
No discomfort in treatment which is especially important for children.

The disadvantages of these devices are few:

Change color quickly with poor oral hygiene.
Subject to staining food colorings.
Often break, and in most cases require a complete replacement. Due to the insufficient strength of the material, it is necessary to exclude solid foods from the diet.
Low wear resistance, so they are not set for a long time.
Cannot fix severe defects dentition due to insufficient rigidity of the polymer composite.

Important: the choice of this variant of braces is optimal if you need to correct a slight malocclusion and curvature of the teeth, or the patient wants to hide from others the fact that the device is available on a modest budget.

Popular Models

Several companies are engaged in the production of composite braces. The following models are especially popular with patients.

Elan

They are developed by Dentsply (USA). Among the features of the corrective apparatus, the following characteristics are distinguished:

The relief of each plate is maximally adapted under the enamel coating, which improves the process of their mutual bonding.
When creating the material, unique technologies were applied, which allowed its external characteristics to be made similar to ceramics.
Structural strength provides a metal frame.
metal groove several times increases the force of adhesion of dental elements with the system arc, and this, in turn, improves the effectiveness of treatment.
Increased strength of the arc and locks allows you to fully adjust the relative position of the jaw arches and evenly distribute the internal load.

When fixing the device, a special cement is used, which is resistant to the liquid environment of the oral cavity, ensures a secure fit of the structure throughout the treatment and eliminates the appearance of gaps and cracks.

The cost of an orthodontic device for one jaw is 10-12 thousand rubles.

Spirit

This system is produced by another American company, Ormco. In many respects, Spirit is similar to the model considered earlier:

Has metal slots, which improve the sliding of the power arc.
Special relief of the base of each bracket provides maximum adhesion to the tooth surface, which is not inferior to metal devices.
Staples well polished, devoid of corners and sharp protrusions, due to which there is no injury to the mucous and soft tissues.
mesh base each plate has slight protrusions that simplify the process of their fixation to the enamel.

The structure can be fastened using a composite mass or special glue.

The average cost of the device for one row is in the aisle of 14-16 thousand rubles.

silkon

They are products of American Orthodontics. The use of MIM technology during the creation made it possible to increase the strength of the material to external influences, and, accordingly, to improve this indicator for the entire structure.

The design differs from analog models:

streamlined shape;
smoothness of all surfaces;
improved fixation with teeth without damaging the enamel coating;
increased resistance to food dyes;
reduced degree of arc friction.

Based on patient feedback, Silkon retains well on the teeth, is easy to remove, and there is no discomfort when worn.

The average price of the apparatus for one dentition is about 9 thousand rubles.

Avalon

Avalon is a vestibular type ligature produced by Ortho Technology. In the production process, a special kind of composite is used, which visually resembles glass, and is practically not inferior in strength to ceramics.

The main characteristics of this model are its indicators:

strength;
resistance to external mechanical influences;
high aesthetics;
reduced arc friction force;
lack of manifestations of allergies;
lack of pointed elements;
high wearing comfort;
unique relief of the base with a huge number of micropores;
the presence of a groove made of silver alloy.

Placing a corrective apparatus on one dentition will cost an average of 14-16 thousand rubles.

Rave

German Rave braces are made of reinforced polymer composite, which affects the overall characteristics of the entire system:

sufficient strength;
the ability to select the shade of the material in accordance with the tone of the enamel;
reliability of fastening of all elements;
smoothness of the details.

Braces are equipped with metal locks, which affects the efficiency of defect correction and the level of wearing comfort.

To install the device on one row of teeth, you will need to pay about 12-14 thousand rubles.

Vogue

They are created from a durable and strong polymer composite, sufficiently resistant to external mechanical stress and food coloring.

They stand out for their high aesthetics, streamlined shape of parts, smoothness of all surfaces, and wearing comfort. Attached with dental adhesive.

The average price of the apparatus for one jaw is 11-13 thousand rubles.

Indications and contraindications

Anomalous arrangement in a number of individual elements.
The occurrence of defects in the jaw arches during their development.
Violation of the bite during its formation.
Preparation of the oral cavity for prosthetics.
Correction of the profile of the face (with a slight protrusion of the front teeth).
Removal of uncut elements.
Mild crowding of teeth.
Disproportion of the parameters of the jaw arches.
Restoration of tooth density.

These indications can appear at any age. Composite braces will cope with them easily and in the shortest possible time.

As practice shows, the installation of the considered model will be inappropriate if the patient has serious occlusion disorders that require a long and deep adjustment.

Also, you should not place the system if:

jaw arches are strongly deformed or displaced relative to each other;
increased tooth sensitivity;
inflammation of the gum tissue, which is in the chronic stage;
pronounced psychoneurological abnormalities;
tuberculosis;
pathologies of the circulatory and endocrine systems;
poor oral hygiene;
hormonal disorders;
metal allergy;
AIDS.

Important: with all the restrictions, the patient may be offered a different way to correct the bite.

Installation process

The installation of braces begins with an initial consultation with an orthodontist, during which a visual examination of the patient's oral cavity is carried out and a treatment plan is developed.

After that, several mandatory procedures are carried out, which are included in the preparatory stage, these are:

treatment of diseases of gum tissues and teeth (according to indications);
elimination of inflammation;
professional removal of deposits from the tooth surface.

The specialist also gives the patient explanations on the issue of oral hygiene.

Important! The duration of preparation directly depends on the condition of the patient's oral cavity, which is why a different amount of time passes from the moment of the initial consultation to the appointment of the installation date - from several days to a month.

Upon completion of all preparatory procedures, proceed to the placement of the corrective apparatus. The whole process takes place in the following sequence:

A mouth expander is placed in the mouth to provide the doctor with access to remote hard-to-reach areas.
The enamel is treated with a special compound, which is then removed.
The teeth are dried by air flow.
Dental cement is applied to each plate, which hardens under the action of UV rays.
Attaching braces to teeth.
Highlighting the structure with ultraviolet light.
Stretching an arc.
Fixing its ends on the extreme side elements.

The whole process of installing the device takes 1.5-2 hours, it takes place for the patient with minimal discomfort and painless.

Adaptation and care

The adaptation period is typical for any modifications of braces, and it is still impossible to avoid it. Adaptation is characterized by a person's getting used to the constant presence of a foreign object in the mouth and its effect on the dentition.

Already the first 2-4 hours after the placement of the corrective apparatus, pain may develop. In the following days you may experience:

rubbing of the mucous membrane;
mild soreness;
feeling of loose teeth;
slight distortion of speech.

As you get used to, the degree of manifestation of these symptoms will subside, and after 10-12 days will disappear completely.

Immediately after placement of the structure and during the entire time the defect is corrected, the patient must follow the following recommendations:

Food. Avoid sticky and hard foods. Reduce the amount of foods and drinks with food coloring in the composition. Also, do not eat hot food with cold food at the same time.
Care. Responsible for daily oral hygiene. Do not put pressure on the braces when brushing your teeth.
Brush your teeth only with a soft bristle brush or use a special dental brush, in which the bristles are arranged in the form of the Latin letter V. In everyday oral care, include the use of an irrigator, antibacterial rinse, floss.
Device serviceability. It is important to monitor the health and integrity of all structural elements. If damage is found, contact a specialist immediately.
Frequency of hygiene procedures. Treat the oral cavity and brush your teeth after every snack. Only frequent and high-quality hygiene will help prevent the formation of plaque and darkening of the braces.
Clinic visit. The patient should visit the orthodontist on the scheduled dates to assess the dynamics of treatment and adjust the tension of the archwire in accordance with the ongoing changes.

The exact implementation of all these rules allows you to make the operation of the device trouble-free, i.e. eliminate damage to its parts, darkening.

Metal orthodontic structures in the modern world are used along with newer structures made from special composites. Composite braces are distinguished by high aesthetic performance, so many patients prefer them.

Features of composite braces

Composite braces are products made of polymer plastic. This material differs from conventional plastic in improved aesthetics, strength and the ability to align the bite without spoiling the patient's smile.

Such braces are made individually. At the same time, models are made on the computer that ideally repeat the structure of each tooth and the angle of their rotation.

The shade of braces can be chosen as close as possible to the shade of tooth enamel, making them hardly noticeable. You can also decorate each bracket with drawings, which is often used when aligning children's teeth.

Steel grooves are inserted into each composite bracket, which contribute to a stronger fixation of the leveling arch and distribute the load in a quality manner.

For the implementation of high-quality fastening of the bracket with the surface of the tooth, a metal mesh (base) is used. Due to this, braces can be attached using any fixing compound.

It is possible to fix braces made of composites both on the outside of the dentition and on the inside, that is, they are lingual and vestibular.

Advantages and disadvantages of designs

Consider the main advantages of composite braces:

High aesthetics. In the presence of a metal groove in the braces, their aesthetic performance deteriorates, but strength and reliability increase.
Such designs keep their original shape. Therefore, a patient who has been fitted with composite braces can eat moderately solid foods without significantly cutting back on their diet.
The presence of a streamlined shape. The tissues of the gums, tongue, palate and cheeks are not injured.
Do not cause allergies, non-toxic, do not oxidize.
They can be made in the form of aligners - transparent covers worn over the entire dentition. At the same time, the pressure on the enamel is minimal, besides, it is possible to fill the structure with a bleaching composition and perform bleaching along with leveling.
Excellent value for money. They are much cheaper than ceramic and sapphire counterparts.
The ability to choose a color close to natural.
Sufficient resistance to chips and fractures.
The ability to use in childhood (after 11 years).
Do not cause discomfort during treatment.

The negative aspects of such products are as follows:

The ability to absorb dyes and stain from them.
Low wear resistance. The structures gradually wear out, so they are not installed for a long time. The maximum wear is one year.
They are used only for mild forms of malocclusion. Severe jaw defects are beyond their power.

Manufacturers

Composite braces are produced by the following companies:

"Elan" - the relief of natural enamel is repeated as much as possible, so the fastening is very reliable with the use of metal elements. Such braces cost from 480 rubles.
"Spirit" - metal structures are added to plastic, which significantly reduces the load on plastic. One such bracket costs about 500 rubles.
"Silkon" - fastened without additional compositions, the material has high strength, they use a special support platform, there are no micropores. One such bracket costs from 550 rubles.
"Avalon" - equipped with a special groove made of high quality silver alloy. They are attached to the teeth using a special technique that significantly increases adhesion. They cost about 590 rubles per tooth.
"Rave" - made of reinforced durable plastic. You can choose different colors and shades. Equipped with metal locks. The cost is in the aisles from 550 to 600 rubles.
"Vogue" ("SAG") - made of strong and durable plastic, resistant to staining. They have a smooth surface. They cost from 450 to 550 rubles.

Installation steps

The initial stage, which implies the further installation of composite braces, is a consultation with a specialist. After it, a visual inspection is carried out and proceed to the preparatory stage.

The main part of preparing the oral cavity for the installation of braces is its complete sanitation, which includes the following:

Treatment of diseases of the gums and teeth, if any.
In the presence of inflammatory processes - they are removed.
Professional cleaning of teeth from tartar and plaque.

Also, the specialist advises the patient on oral hygiene, when there will be braces in it, gives recommendations.

After completing all the preparatory procedures, proceed to the installation. To do this, use a special expander of the oral cavity, which allows access to hard-to-reach places and simplifies the work.

After this, drying of the teeth follows, which will contribute to the high-quality fixation of the glue. Cement is applied to each bracket, which is able to harden under the action of an ultraviolet beam. And proceed to attaching each lock to the tooth.

After the installation phase, an adaptation time follows. 2-3 hours after installation, pain in the jaw is possible. There may also be a feeling of strong loosening of the teeth. This is only evidence of a successful start of the correction. Discomfort can last for several days, with severe pain at this time they are allowed to take painkillers.

Proper operation

With proper use of composite braces, their service life will increase significantly. To do this, you need to follow all the recommendations of the doctor and carry out high-quality oral hygiene.

On a note: Braces and teeth after each meal should be well cleaned of food debris to avoid caries. It is also recommended to rinse your mouth with special formulations.

In addition, viscous and solid foods should be excluded from the diet so as not to provoke structural failure. It is also better not to use foods and drinks that have coloring substances, so as not to stain the plastic of the braces.

Braces are the most basic method for correcting misaligned and crooked teeth. Such treatment with metal systems is quite expensive and spoils the appearance of a person.

The old iron bracket systems have been replaced by more modern structures made of composite materials, which are inexpensive and almost invisible on the teeth.

General view

Composite braces are orthodontic products made of polymer plastic. They are significantly different from conventional plastic devices.

Composite products have improved strength characteristics and aesthetic qualities. Due to this, they correct bite defects more efficiently and effectively, and at the same time do not spoil the appearance of the patient.

Structures are made to measure. With the help of computer technology, an accurate model of the teeth is created, which takes into account all the features of the structure and arrangement of the elements of the jaw arches.

As a result, the locks are securely fastened and repeat exactly the relief of the tooth and the angle of inclination.

Composite materials make it possible to choose the color of products that is most suitable for the natural shade of the patient's tooth enamel. Due to this, the design looks almost invisible to others.

Also it is possible to color the braces in different colors, which is often used to correct an overbite in children.

To increase strength, products have grooves made of steel, thanks to which the metal arc is securely fixed and evenly distributes the load.

A metal mesh is used at the base of the locks. It allows you to fix products on the teeth with any adhesive solution.

Another feature can be called the versatility of composite products, which lies in the fact that they can be either lingual or vestibular.

Pros and cons of devices

Any orthodontic product has its advantages and disadvantages. Composite braces are becoming increasingly popular due to their impressive list of benefits.

The advantages of these systems are:

Excellent aesthetic qualities. The possibility of choosing a color ensures invisibility on the teeth. This greatly facilitates the psychological side of orthodontic treatment;
Resilience to external factors. Composite materials are able to retain their original shape. Thanks to this, the patient can not change his usual diet and habits;
Painlessness. The streamlined shape eliminates injury to soft tissues in the oral cavity. Soft impact on the dentition does not cause pain;
Safety. Such products do not cause allergic reactions, do not emit toxins and do not oxidize;
The optimum ratio of price and quality. Composite products are much cheaper than similar braces of sapphire or ceramic models;
Can be used in children over 11 years of age.

However, the systems also have significant disadvantages:

Products are quickly painted under the influence of food colorings. Drinking a lot of coffee or a habit of smoking will cause your braces to darken quickly;
Fast erasure. Such systems have a maximum service life of only 1 year. After this time, if the result has not yet been achieved, the patient needs to purchase a new system;
There are limitations in the scope. Composite braces can only correct mild defects. For severe forms of malocclusion, only metal systems are suitable.

Popular Models

Among all the models proposed by manufacturers, experts and patients prefer one of the six systems described below.

Elan

The Elan bracket system is a development of the Dentsply company, which is located in America. These products are based on polyurethane.

The simultaneous use of a metal frame makes the devices particularly durable. The embossed base exactly repeats the anatomical shape of the tooth and provides a secure fit.

The systems use a metal arc painted white. This ensures complete invisibility of the structure on the teeth. The cost of one Elan lock is about 480 rubles.

Spirit

Spirit braces are presented by Ormco. In such structures a high-strength composite reinforced with a metal frame is used. Due to this, the load on the product is significantly reduced, and it lasts longer.

Reliable fixation of the locks to the teeth is ensured by the protrusions on the base. Careful polishing of products excludes injuries of the oral mucosa. The cost of these braces is 500 rubles apiece.

silkon

Silkon braces are made using a special technology. Thanks to the reinforced composite, the strength of the products is increased by 30%.

Braces have a perfectly smooth surface that is resistant to staining and does not cause injury.

A special platform at the base of the locks allows you to securely fix them without special adhesives and not damage the tooth enamel. The cost of such products is 550 rubles.

Avalon

The American company Ortho Technology offers Avalon composite braces. The high-strength polyurethane of the lock is reinforced with a silver alloy. This reduces the friction force of the arc and speeds up the treatment process.

Products are made in white and carefully polished, due to which the effect of complete invisibility on the teeth is achieved.

The unique base and special fixation technology ensures secure fastening of locks to the teeth. The cost of such products is about 600 rubles apiece.

Rave

Rave braces are made from high strength reinforced composite. Metal grooves on the locks give additional strength to the structures.

A feature of the model is the ability to choose the colors of the locks. The price for 1 piece of these products exceeds 650 rubles.

Vogue

This model is based on a durable composite, which characterized by high resistance to staining.

The surface of the lock is perfectly smooth, which provides the design with stealth and absolute security. The price for 1 bracket varies from 550 to 600 rubles.

Indications and contraindications

Indications for the use of devices can be called:

The presence of crowded teeth;
The presence of gaps between the teeth;
The presence of malocclusion;
Large inclination of teeth.

Such systems can be used to correct minor bite defects, they can be installed both in adults and in children.

But designs cannot be used to correct complex bite defects and various anomalies in the structure of the jaw. In such situations, it is better to use metal structures.

Installation process

Orthodontic treatment begins with a consultation with a specialist. During the examination, the doctor determines the condition of the oral cavity and identifies defects that require treatment. To assess the state of the root system, X-ray and panoramic images of the jaws are taken.

Based on the collected data, the doctor selects different treatment options, from which the patient chooses the most suitable one. After that, casts of the jaws and a plaster model are made.

The next step is to prepare the oral cavity. Any bracket system can only be installed on healthy teeth. Complete oral health care includes:

Treatment of all carious lesions of the teeth;
Therapy of existing inflammatory foci on the oral mucosa;
Professional cleaning of teeth from tartar and plaque.

If necessary, the doctor may prescribe additional examinations of the body or consultations of narrow specialists to identify possible contraindications to the use of braces.

As soon as the devices are ready, which are made on the basis of the model of the patient's jaws, the day of their installation is appointed.

The procedure consists of the following steps:

A special expander is installed in the oral cavity, which makes it easier to access all the teeth;
The outer surface of the teeth is polished;
A tool is applied that helps restore and protect tooth enamel from negative effects;
After 30 seconds, it is thoroughly washed off and the teeth are dried;
Each lock is fixed separately with an adhesive that cures under the influence of light;
After attaching all the locks, a metal arc is inserted;
The fixing of the arc in the grooves is carried out by ligatures.

Upon completion of the installation procedure, the doctor gives recommendations on oral care and appoints the next visit.

Adaptation and care

Getting used to composite braces is very fast. Due to the rounded shapes and gentle pressure on the teeth, the patient almost does not feel them.

A few hours after the installation, you may feel a slight pain and loosening of the teeth, which disappear after a few days. This is evidence that the correction process has begun.

Oral hygiene and device care play an important role in the entire orthodontic treatment process. Compliance with all the rules allows not only to avoid the development of caries, but also to preserve the integrity of orthodontic products.

Care is as follows:

Regular teeth cleaning should be taken after every meal. In addition to the usual toothbrush for oral hygiene, special brushes and brushes, rinses and pastes should be used;
Certain food restrictions. Patients should avoid food that is too hard, which can cause parts of the structure to break. In addition, it is necessary to avoid coloring foods that will lead to discoloration of the braces;
Do not use abrasive toothpastes. The granules in such pastes can scratch brackets;
Visit the dentist regularly to evaluate the results of treatment, change ligatures or archwires and adjust the pressure force.

If earlier people were reluctant to install braces because of their external unsightliness, now the orthodontic market offers its customers attractive systems. They are not so obvious and are distinguished by elegance. These are no longer bulky iron structures in the mouth, but modern aesthetic braces. That is, systems that are invisible and easy to use.

Composite braces

These are braces, for the manufacture of which modern composite materials are used. A sufficiently functional and discreet system has both its advantages and disadvantages. Benefits include the following criteria.

High aesthetic qualities: the bracket system made of composites completely copies the natural color of tooth enamel.
Attractive democratic cost - it is much lower than that of sapphire and ceramic counterparts.
Works great for minor bite problems.
The material is plastic, therefore it has sufficient resistance to chips.

But along with all their advantages, composite braces also have certain disadvantages. First of all, this is insufficient rigidity of the material. He cannot cope with serious violations of the jaw apparatus, which is why he most often has to be strengthened with a metal groove. This solves the problem of increasing pressure on the teeth, but does not save you from poor wear resistance.

The bracket system made of composites has another drawback - the ability to stain from food and drinks, so that over time it loses its original color and attractiveness. You can evaluate the appearance of the aesthetic bracket system by looking at the photo.

Ceramic braces

Aesthetic ceramic braces are not much more expensive than their metal counterparts, but are much less noticeable on the teeth. The system of this material has a number of advantages.

Relatively low cost, which is available to almost everyone.
The color of the ceramic exactly matches the natural tone of the enamel.
Braces made of this material are completely devoid of shine, which allows them to almost merge with the teeth.
Do not cause physical and moral discomfort.

However, this material is not without drawbacks. Firstly, the plaque that forms on ceramics over time can change its color. Therefore, people often have to give up strong tea, coffee and other coloring products. Secondly, it is a rather fragile material that requires careful handling. You can evaluate the aesthetics of ceramic braces by looking at the photo.

Sapphire braces

Aesthetic braces made of sapphire are the most popular due to their attractive appearance. This artificial stone is completely transparent, shiny and very beautiful. Let's look at all the pros and cons of sapphire braces. The clear advantages of this material include the following advantages.

Upon contact with saliva, such devices become crystal clear and completely invisible on the enamel of the teeth. When light hits them, they shimmer like a precious stone.
Sufficiently durable material is used.
Sapphires do not change their color upon contact with dyes, so the braces made of them retain an attractive appearance throughout the course of bite correction.
These devices do not cause discomfort, do not injure the oral cavity and have no contraindications for use.

Of the minuses, one can name a rather high cost of construction and a long period of wearing, which often lasts up to 2 years. The following photo will help you to make sure that these orthodontic appliances are completely invisible.

colored braces

Colored braces are especially popular among children and young people who follow fashion and like to look original. What are their features?

Bright colors are not the braces themselves, but the ligature, that is, elastic bands.
Hue can be completely arbitrary, it is permissible to use several colors at once. It all depends on individual preferences.
Such an interesting solution will allow children and teenagers to overcome embarrassment and get used to braces. Looking at the photo, you can see that multi-colored braces look quite original.

Lingual braces

For those who are categorically against wearing even barely visible transparent braces, experts have developed a special system - lingual. It is invisible due to the fact that it is fixed on the inside of the teeth. This innovative development is the pinnacle of technology when it comes to aesthetic braces. Absolute invisibility and maximum aesthetics are guaranteed.

This system is good in that in the process of wearing it, inflammatory diseases occur much less frequently. It does not injure the tongue and mucous membranes of the oral cavity, does not cause discomfort.
Correction of small deviations requires a short wear - about six months or a little more. With severe defects, this period can increase up to 2.5-3 years. But since patients get used to lingual braces very quickly, this does not cause them any inconvenience. The following photo will help you understand what such a design looks like.

From our article, you learned about all the types of aesthetic braces that an orthodontist can offer you at a consultation. As a conclusion, we suggest that you familiarize yourself with an interesting video that will help you understand how these systems work.