How to turn mobile (cellular) Internet or Wi-Fi on and off on iPhone and iPad. How to turn on and off mobile (cellular) Internet or Wi-Fi on iPhone and iPad How to set up mobile Internet on iPhone 4

Articles and Lifehacks

Usually, new owners of Apple devices do not know how to do this at all. Our article will tell how to set up internet on iphone 4s. Note that this does not require the user to have any special knowledge or skills, even an idea about it - except in cases of software problems.

Internet setup in iPhone 4S

Let's start with the fact that the setting largely depends on our mobile operator, which can activate the appropriate settings automatically. To do this, open the Safari browser and prescribe any address, thus checking the network. If our device still does not connect to the Internet, then we are recommended to perform the following steps.

Most often, the mobile operator itself sends us the settings on the iPhone; sometimes we can call the support service ourselves with such a request. However, there are often cases when we need to register such settings ourselves, manually.

We go into the main settings of the device and go to the "Network" item. If we want to use the mobile Internet, select the "Cellular data network" item and turn it on. It is recommended that you check the correct settings with your carrier in advance. They are filled in with Latin and lowercase letters. Occasionally, such data is consistent with the tariff used.

If we prescribe the settings of our cellular operator manually, we are prompted to enter the APN (that is, access point), username and password. These settings are specific to each service provider. For example, companies such as Beeline and MTS have the same username and password (beeline and mts, respectively), while these fields remain empty for the Megafon operator. If we use Beeline, then we write internet.beeline.ru in the access point line, if MTS - internet.mts.ru. Megafon subscribers just need to enter the word internet.

Note that if we are roaming, it is recommended to take care of disabling cellular data and 3G in advance.
So, we figured out how to set up the Internet on an iPhone 4s. After setting up, it is recommended to restart our device.
However, you should know that it is much more profitable to use not mobile Internet, but Wi-Fi.

How to set up Wi-Fi Internet in iPhone 4S?

Since our mobile device is equipped with an appropriate module, we definitely need to know about the principles of this protocol. A wireless Wi-Fi hotspot is easy to organize both at home (taking care of buying a router) and in public places - for example, connecting to available networks in a cafe or bar.

Connecting to a wireless network is very simple, if only. It is enough to select one of the available networks, however, you will first need to activate the “Wi-Fi” item through the settings. The disadvantage of the "apple" gadget is that our iPhone is actually tied to the same access point - unlike, for example, devices running Android. If we move away from it, the connection is lost.

SIM cards of most mobile operators are sold with mobile Internet connected: the user just needs to install the card in his iPhone, and access to the network will be immediately available to him. However, to know how to set up the Internet on an iPhone manually, is still necessary, otherwise, in the event of a system failure and deletion of network settings, the user will be left without access to a significant number of functions - neither checking mail nor downloading applications from the AppStore will be available to him.

First of all, you need to clarify whether data transfer is activated in the iPhone settings. To do this, go to the " cellular" on the menu " Settings».

Then check the two sliders " Cellular Data" And " Enable 3G". Both must be active.

If the toggle switch Cellular Data» is not enabled, the iPhone will be able to access the Internet only if it is present in the Wi-Fi distribution area. Turning on 3G is also highly recommended - otherwise the smartphone will use the standard EDGE. The maximum download speed that can be achieved when connected to EDGE- 474 Kb / s, but you should count on 50 Kb / s. Needless to say, it's too slow internet?

Even if you switched the "Enable 3G" slider to the active position, this is not a guarantee that the gadget will work via 3G. It all depends on the coverage area: if the connection is poor in the area where the iPhone is located, most likely you will have to deal with EDGE.

It is very easy to find out through which standard data is being transferred - just look at the top of the screen. One of two icons can appear next to the operator name: 3G or E.

The second one indicates the transmission of data through EDGE. Therefore, the letter E terrifies all lovers of fast Internet surfing.

If there is neither 3G nor E opposite the name of the provider, then mobile Internet is not available. There are two possible reasons for the lack of a network: either the “Cellular data” slider in the settings is turned off, or the coverage is very weak.

After you check the toggle switches, you need to check if the mobile connection settings are entered correctly. It is done like this:

Step 1. In the same section cellular"Scroll down, find the subsection" ' and go into it.

Step 2. Notice the block Cellular Data". There are 3 fields to be filled in: APN, Username, password.

The following parameter values ​​are correct for leading operators:

All parameters are written in small Latin letters.

Mobile Internet settings can be ordered by calling the contact center of the mobile provider. In this case, you do not have to write anything manually - it will be enough to save the settings from the SMS message.

After entering the parameters, you need to restart the phone - when the gadget turns on, the Internet will be available. In the same section Cellular data connection"You can set up MMS - how this is done is described.

How to set up Wi-Fi on iPhone?

Wi-Fi is an alternative to mobile internet. In large cities, distribution points are located everywhere - you can enjoy Internet surfing in bars, universities, on city alleys without having a ruble on your mobile phone account. However, Wi-Fi also has disadvantages. Firstly, once the user leaves the coverage area, and the Internet immediately disappears. Secondly, in public places, the speed is very low, because many users are using the network at the same time.

You need to connect Wi-Fi like this:

Step 1. IN " Settings» find the section « WiFi' and go into it.

Step 2. Switch the toggle switch " WiFi» to the active position.

Step 3. In the block " Select network»Find the source you want and click on it. In our case, this AndroidAP.

Step 4. Enter the Wi-Fi password and click " Connect.».

When the connection is made, the source will be marked with a blue checkmark, and a characteristic Wi-Fi icon will appear next to the operator's name.

It is usually not necessary to adjust the Wi-Fi connection settings, but it is still worth checking them. To do this, click on the field with the name of the connected access point. You will see the following options:

Make sure that:

After the initial Wi-Fi connection setup, you will be able to connect to the access point via " Control Center". It will be enough for you to make a swipe from the bottom up and click on the icon with the Wi-Fi symbol, known to everyone.

When connected to Wi-Fi, the battery power is consumed faster than when using mobile Internet. Therefore, before connecting to the distribution, make sure that the battery of the iPhone is sufficient.

Why is the Internet not working on iPhone?

If you entered the Internet settings correctly, but the data transfer still does not work, there may be several reasons for this:

The number is not connected to the service responsible for accessing the network

Such a service is a component of the basic package of options for any tariff; for example, at MTS it is called " Mobile Internet". Its absence can only be explained by the fact that the user himself got into the “Personal Account” and unknowingly deleted it. You can activate this service by calling the operator's contact center or by personally contacting the service salon with a passport.

There is not enough money on the SIM card to access the Internet

With a negative balance, access to the Internet is blocked, even if the period of validity of the prepaid unlimited Internet option has not yet expired. Moreover, the icon 3G(or E) will still be visible next to the name of the operator - just the pages in the browser will not be able to load. The solution to this problem is obvious - you need to replenish the balance.

Spent all mobile data

If earlier, when the traffic quota was used up, the user retained the ability to access the Internet (only at a very low speed), now they simply do not let him into the Network. A window appears on the mobile screen offering to connect additional services to increase traffic - of course, on a reimbursable basis. There are several solutions to this problem, and the use of additional options for money is not one of them:

• You can contact the operator and ask him to reconnect the prepaid mobile Internet service from the current date. This can only be done if there is enough money on the SIM card account to charge the monthly payment.
• You should buy a package of megabytes for bonus points. MTS has the most developed bonus system. For example, to purchase 100 MB from this operator in excess of the main package, it is enough to spend 150 bonuses, 100 of which can be obtained simply by passing a poll on the official MTS website.

Finally, you can find a free distribution of Wi-Fi and, using it, “endure” until the date the traffic quota is updated.

Many users mistakenly believe that the Internet on the iPhone is not working due to a jailbreak installed or a recent OS update. In fact, neither one nor the other does not affect data transfer in any way.

An extreme way to solve the problem with mobile Internet on iPhone - reset network settings. You have to follow the path " Settings» — « Main» — « Reset» and select « Reset network settings».

User information - music, notes, messages - with such a reset, it will not go anywhere from the device. At the end of the procedure, you need to “drive in” the mobile Internet settings again and try to go online again. If the reset did not help, you should contact the service center for help.

How to solve problems with Wi-Fi?

If you can not turn on the Internet via Wi-Fi, it is worth carrying out a series of manipulations with the router. Need to:

• Disable the router.
• Wait 20 seconds.
• Launch the device and activate the Wi-Fi function on the iPhone.

All hidden processes that provoke a failure will be terminated with this method of reboot - therefore, the problem will be fixed.

Conclusion

Setting up the mobile Internet is not at all as difficult as they say - not only an experienced system administrator can do this work, but also a user who is not initiated into the secrets of programming. The main thing: correctly fill in the three parameters of cellular data and do not forget to reboot the device after that.

Adjusting the Wi-Fi connection is even easier. The task of the user, in general, is to enter the correct password. The Wi-Fi network settings are set automatically - as a rule, there is no need to go into the connection settings and change something there.

But what to do if the phone does not connect to the network on its own, we answer - continue reading how to set up the Internet on the iPhone and prepare to enter the settings manually:

We go to Settings– Main– Net– Cellular data network

Internet settings in iPhone with iOS 10

In the first example, the Internet settings were shown using older versions of iOS as an example. In order to enable the Internet in an iPhone with a more recent firmware (for example, iOS 10), we do the following. If you do not have a SIM card yet, then we purchase a SIM card, having previously decided on a more suitable tariff plan. From the seller immediately take a brochure with settings. .

Now go to the Settings app and select - Cellular - Data Options


Next, select - Cellular data network, and prescribe all APNs (and, if necessary, other sections). The example above shows the settings of the Tele2 operator, you need to enter the settings of your operator.

We make settings for the Internet, which you can find out from your mobile operator or search in the already existing list given in the archive below. Fill in the fields in small, English letters, as in the examples below:

MTS
APN: internet.mts.ru
Username: mts
Password: mts

beeline
APN: internet.beeline.ru
Username: beeline
Password: beeline

Megaphone
API: internet
Username: empty
Password: blank

Tele2
APN: internet.tele2.ru
Username: empty
Password: blank

You can search for your carrier settings in

How to enable and disable mobile Internet in iPhone

Enabling and disabling mobile Internet in iOS goes like this: Settings - Cellular - Cellular data. To save data and battery life, turn off Cellular Data when you're not using the internet.

We considered how to set up internet on iPhone using mobile GPRS internet as an example. But there is another way to connect the Internet to the iPhone - since the phone is equipped with a Wi-Fi module, it is possible to use a Wi-Fi hotspot that can be set up at home or use public hotspots. In large cities, wireless Internet access points are widely developed, so while sitting over a beer in a pub, you can also surf the Internet, check your mail or look at the weather. To connect via a wireless Wi-Fi network, you need to go to Settings– WiFi and activate the marker, after searching, select one of the found networks.

The disadvantage of connecting via Wi-Fi is that the iPhone is tied to a specific access point, if you move away from it for a certain distance, the connection is lost. Mobile GPRS-Internet is more convenient in this regard, the Internet works in the coverage area of ​​the cellular range.

If you are interested in high-speed Internet on the Apple iPhone and you have already completed the steps above, then see - "" and speed up.

If the Internet does not work on your iPhone, you need to identify the cause of this problem and fix it.

First of all, you need to clarify whether your number has Internet access service. It happens, for example, that it is disabled on corporate SIM cards. In this case, you need to call the operator and order this service.

Pay attention to the top of the display - there should be an icon in the form of the letter E. It will tell you that the iPhone is currently in the Internet visibility zone. If you can't see it, you may be out of network coverage. Try going outside, or just restart your phone.

If in this case you cannot enter the World Wide Web, try looking at the data transfer settings. To do this, go to the menu "Settings - General - Network - Cellular data network". Here you will see the following three items: APN, Username.

See if the settings for your operator are correct:

MTS

APN: internet.mts.ru
Username: mts
Password: mts

Beeline

APN: internet.beeline.ru
Username: beeline
Password: beeline

Megaphone:

API: internet
Username: gdata
Password: gdata

If suddenly this did not help you, in the same menu, click "Reset settings", and then re-enter the data to connect to the network. Check out .

It is impossible to imagine a modern smartphone without access to the network. Ignoring its advantages, the user loses the lion's share of the capabilities of the mobile device. To prevent this from happening, we will figure out how to turn on the Internet on an iPhone and configure it for different providers.

Turn on internet on iPhone

The service of access to the World Wide Web is always provided by your telecom operator, and you will use it at the appropriate rates. Before connecting, it is advisable to immediately find out what tariff packages, services and promotions it offers, as well as evaluate how intensively and often you are going to use the network. When the issue is resolved, we perform the following actions:

• open the “Settings” of your iPhone;
• go to "Cellular";
• swipe over the “Cellular Data” slider, it should turn green;
• among other things, on the screen, next to the name of the operator, the mark GPRS will appear.

This is the first time we have accessed the web from a mobile device. However, this will provide us with a minimum speed of use, since GPRS is a rather outdated format for our time, only the second generation of cellular networks (2G). However, it will be enough if you just want to chat with friends in instant messengers or check mail. For full-fledged surfing of “heavy” sites, using maps and navigation functions, downloading applications, we go further.

How to turn on the Internet on iPhone - turn on 3G connection

Among other things, ultra-economical 2G has one critical flaw - when it is on, you cannot receive calls. Therefore, it is needed only in rare cases, when there is little money on the account, and it is very necessary to go online. In other cases, turn on 3G:

• as in the first case, go to “Settings” -> “Cellular”;
• click on "Data Options";
• select "Voice and data";
• leave a checkbox in front of 3G or LTE - depending on what kind of coverage is available.

What to do if there is no Internet access on the iPhone?

If you have done the manipulations described above, but there is still no connection to the network, specific settings from the current operator will be required. For example, for the MTS company, they will look like this:

• go to “Settings” -> “Cellular” -> “Data Options”;
• enter the following values:
• Cellular data: APN: internet.mts.ru, Username: mts, Password: mts.
• The rest of the lines are optional, according to the attached image.

How to enable Internet on iPhone via WIFI

A special explanation requires connecting from the iPhone to a Wi-Fi network. How to do it:

• take the smartphone and swipe the display with your finger from the bottom up;
• a panel with icons will appear;
• we are looking for an icon with the designation “Wi-Fi” in it;
• after clicking, available networks will be displayed - select the one you need;
• we write the password to it, we try to connect;
• if access has already been given (perhaps the device found the network automatically) – the icon is light, if not – it is dark;
• alternative way: go to “Settings”;
• select the “Wi-Fi” section;
• press the switch with your finger;
• specify the network, enter the password and wait for the connection.

That's it, you are completely ready to surf the web. Parameters for setting up other operators can be found on their official websites, or you can contact technical support by phone.