Title page sample message. How to write the title page of an essay: we make it beautiful and correct

Title page, title page - the first page of the academic work, reveals the student's data and the topic. It is used for abstract, term paper, diploma work, report, . It contains information on:

  • Full name of the student
  • Speciality
  • educational institution
  • Work theme
  • The type of work
  • Year of completion
  • Data of the verifier

The design of the title page in accordance with GOST is regulated by the standard 2.105-95. It was adopted in 1995 and to this day is the main standard for how to issue the title page of an abstract and other works (term papers, diplomas, control papers). This GOST is valid in all CIS countries, including:

  • Russia
  • Belarus
  • Ukraine
  • Kazakhstan

Download title page samples.

Title page margins:

  • left margin: 30 mm;
  • right margin: 10 mm;
  • top margin: 20 mm;
  • bottom margin: 20 mm.

What font should be in the title page.

The guest specifies font size 14 for all fields, except for the title and title of the work. Usually Times New Roman or another sans-serif font. All data except student information is centered.

Instruction - 6 steps for the correct design of the title page in accordance with GOST.

Depending on whether you are making a title page for a control, term paper, diploma or essay, the completeness of the information will be different. But there are a number of mandatory data that are indicated for each work. The title page header contains the name of the ministry and educational institution.

Step 1. Ministry of Education

Specify the Ministry of Education of your country (14 font, capital letters)

Step 2. Univer.

Following is the full name and form of ownership of the educational institution (14 font, capital letters)

Step 3. Chair.

After that, we indicate the department (14 font)

Step 4. Type of work.

After that, depending on the type of work, in capital letters (16 font, bold Bold):

    • GRADUATE WORK
    • COURSE WORK
    • TEST
    • ESSAY

Step 5. The theme of the work.

Full topic name, classic spelling 16 font, bold, lower case

Step 6. Data of the performer and verifier

The data of the executor and the reviewer for different works are formatted differently, but always have 14 font size and are written in lower case. Here are some examples ○ Diploma Template

○ Template for term paper

○ Test Sample

○ Abstract template

Can they reduce the score for incorrect design of the title

The design of the title page is an important point on any subject and is part of the normative control. If the teacher accepted the work, in which the title page is incorrectly designed, he does not have the right to reduce the score for this, because. in this case, the work was checked and approved by the reviewer.

Which universities are suitable for

These rules are GOST. Therefore, they are universal and suitable for any university in Russia, Ukraine and other CIS countries. If you fundamentally do not want to redo it when the teacher requires it, you can refer to GOST 2.105-95. in which it is clearly spelled out for whom and how it operates.

Is the design different for different items?

The template for the design of the title does not depend on the subject. All its elements can remain the same and only the name of the item can change. The exception is test papers, which in some subjects may require a title page for a notebook. This is the usual A4 sheet format folded in half. We have a separate material where you can download this sample or design it yourself.

Is the design different for specialties?

Specialty doesn't matter at all. All elements remain unchanged, except for the specialty, which needs to be changed for the current one.

In general, the report is not difficult to write and format, it is more difficult to deliver a report well in front of a class or audience.

When designing the cover page of a school report, a strict style should be followed. It is preferable to use classic colors: black font on a white background.

If the printed pages of the report are bound on the left side, then when designing the title page, you must leave the space intended for the binder - a field of 3.5 cm.

The preferred line spacing is 1.5, the font is Times New Roman.

Title cap

At the very top of the first page, the name of the parent educational organization should be written. The next line is the name of the school of the student making the report.

Type and topic of work

In the middle of the title page is the name of the type of scientific work being performed - in this case, this is a report. The topic of the report is written below.

The topic must be well defined. If possible, it should define the specific boundaries of a given topic, its clarification. It is advisable to avoid such formulations as: “The work of A.P. Chekhov”, “Animal and plant world of Eurasia”, “Water world”. It is impossible to cover such topics in one report, so it is worth concretizing them: consider some works by A.P. Chekhov, certain groups of animals or plants of Eurasia, the largest seas in the world or interesting facts about aquatic animals.

The font in which the word "Report" is written on the title page may be larger than the font of the rest of the text. When writing a topic, it is customary to use a smaller font.

Specify the type of work “Report” and write the topic

Regalia of student and teacher

Below the title of the topic, on the right side of the sheet, the full name is written. student and his class. The next line - full name. teacher who will check the report.

City and year of writing

At the bottom of the title page is the name of the place (settlement) of the student and the year in which the report was prepared.

Summing up

Proper design of any scientific work, including a report, allows you to strengthen the overall positive impression of the work and increase the rating. In the article, we analyzed in detail each element of the title page of the report. In order not to prescribe all the fields again, download the finished sample:

How to design a cover page for a report at school if you don't know how to do it updated: February 15, 2019 by: Scientific Articles.Ru

For many schoolchildren or first-year students, the design of the title page is confusing. On the one hand, this is sheer nonsense that does not affect the value of the work, on the other hand, teachers often find fault with the design of the title page. The problem is also that, despite the official state requirements, each institution has the authority to demand its own registration from students.

It should be understood that the abstract or report is scientific work. That is why there are so many requirements related to the design. To begin with, the entire work and the title page should have a clean and tidy appearance. If you will use a folder when submitting an essay or report, then you need to provide a place for it. Step back three centimeters on the left, and one and a half and two on the other sides.

How to format the title page of the abstract?

By Russian standards, the title page of the abstract (and the report at the same time) is divided into 4 parts:

  • the top block contains the name of the educational institution;
  • the central block contains information about the work itself (name, type of work);
  • the right block includes data about the author of the work (full name of the student, group) and the teacher (full name and status (professor, associate professor) of the teacher), also in this place signatures are usually made and marks are put, notes on work;
  • the bottom block is the name of the city and the date of creation of the work.

Each indentation and font size has its own instructions from the Ministry of Education, but the problem is that educational institutions have the right to make their own requirements for the title page. Moreover, each department can make its own amendments to the design first sheet. The whole transformation process ends with teachers, who often do not pay attention to "requirements from above" and put forward their own "tested" schemes.

If disagreements arise, then it will not be possible to prove anything to the respected professor. Therefore, when making a title page, there is a proven way - to ask the teacher for it. This way you can avoid unnecessary worries and save time on polishing the title page. But still, often the teacher is asked to issue the work “correctly”, that is, according to state standards.

How to properly format the title page of an abstract according to state standards?

Upper block

The name of the educational institution is written at the top, it is worth paying attention that it is written in full. For example: “Vologda State Academy named after N.V. Vereshchagin. The entire name can be written in CAPITAL LETTERS (holding Caps Lock). The name is written in full! With all the "Ministry of Education ..." and "Institution of Higher Education ...".

The text should be bold, with center alignment set. To save space, you can make the line spacing equal to one. The font size for the entire title page is chosen one - 14 point.

The top block should have a 2 cm deviation from the top of the sheet. The same indent should be for the bottom block from the bottom of the sheet. For the left side, the indentation has already been given above, and for the right side it is better to make it one and a half centimeters. Speaking about the fields, it should be noted that it is this indicator that changes most often, therefore it is better to ask the teacher about them.

central block

It goes immediately below the top block, and you need to indent two lines (Enter twice). The central block consists of four or five lines or lines, each with its own information:

  • first line- the name of the faculty, but it is often written in the upper right corner of the title page, you should check this line with the teacher;
  • second line- the name of the department, written in ordinary letters (14 size), the first word "Department" with a capital letter (Department of Anatomy and Histology);
  • third line- in capital letters (holding Caps Lock) is written "SUMMARY", this is the main word in the entire title page, so you can make it in 16 point font. You also need to make a gap of one line between this line and the previous one;
  • fourth line- the name of the discipline. For example: “By discipline: Anatomy of farm animals”, while the first letters in the line and the title are written in capitals;
  • fifth line- the title of the work, first with a capital letter write "On the topic:", and then with a capital letter the name of the work. Write it in full, even if it is large, the title of the work can come out in two lines.

right block

We will divide it into two parts: for the teacher and the student.

  • Completed:
  • 1st year student
  • day department
  • Groups №XXXL
  • Ivanov Ivan Ivanovich
  • Signature:

The teacher part consists of 7 lines:

  • scientific adviser
  • Professor / Associate Professor / Senior Lecturer (ask the teacher for his status)
  • Departments of Anatomy and Histology
  • Petrov Petr Petrovich
  • Grade:
  • The date:
  • Signature:

All words are written in 14 point, regular font.

bottom block

The easiest block to design. Make some indents so that the two lines of the bottom block fit at the very bottom. Usually you need to skip 7-8 lines. First, write the name of the city, and below - the year of writing the work.

How to arrange the title page of the report at the institute and school?

There are no differences in the design of the abstract and the report. Only instead of the word "Abstract" write "Report". Confusion can cause a report at school, but you can draw it up according to the same rules as an abstract. Fonts and indents in a school report are similar to a university essay. In a school report, you can increase the font of the topic name, frames and underlines are also allowed. If the work is creative (on the topic of culture and art), then you can choose more original fonts. In the upper block, indicate the name of the school (in full). In the middle block, skip the name of the department and discipline. The right and bottom blocks are identical to the student's abstract.

During the course of study, every student of a college or technical school faces the completion of an essay. This work is a detailed presentation of material from scientific sources on a given topic. It is noteworthy that the more of these sources will be used in the course of the study, the better the report will be.

But the quality of such a document is evaluated not only by the completeness of the material presented and the compliance with the topic set by the teacher, but also by other parameters - the uniqueness of the text, the achievement of the goals and objectives, the correct design, taking into account all the requirements, as well as other parameters.

This article will focus on writing one of the sections of the report - the title page - in accordance with all accepted requirements (or according to GOST).

If you have any difficulties with writing the abstract itself, contact the portal specialists who provide services for writing essays and term papers.

Correctly formatted title

The title page is the first page of any work, because it is the verifier who sees it first. That is why it is so important to write this part of the paper correctly.

This section of the work should:

  • be written without errors;
  • include all necessary information;
  • be performed in accordance with GOST.

So, the title is part of the abstract document, so it must be written without spelling errors. But what should be included in it?

Any first page of the research should contain data on:

  • educational institution where the author is studying;
  • the department where the report is being made;
  • type of work and its topic;
  • the author and the verifier, as well as the reviewer;
  • city ​​and year of execution.

General requirements for registration

This section must be done in black Times New Roman text. Mostly 14 font size is used, but in some cases, which will be discussed later - 18. This page is not numbered, but is taken into account in the general numbering.

Let's consider each of the elements of the title in more detail.

  • Information about the educational institution

In this case, you must specify the full name of the college or technical school - the data is located at the top of the page. When performing this paragraph, the standard font size is used and it is allowed to write it in capital letters (but not required). The name of the SSUZ should be center aligned.

  • Department where scientific work is written

Information is located under the name of the college or technical school, is written in a standard font and is separated from the name of the educational organization by a line. Data about the department are aligned "in the center".

  • Type of work and its theme

This item is located in the middle of the sheet. It is also centered, but the font size in this case should be 18. The type of report and its topic are written in bold.

  • Information about the author, reviewer and reviewer

Please note that there may not be a reviewer - this is not necessary for papers written in secondary schools.

In this paragraph, you must specify the name of the student, his group and course, as well as the name and position of the inspector. If there is a reviewer, indicate his full name and position. The text of this paragraph should be aligned "from the right edge".

  • year and city

Here it is necessary to indicate the year of the scientific research and the city in which the secondary school is located. The data must be centered.

Indentation

Indents are also an important point in the design of the title in accordance with GOST. The indent on the right should be 1.5 centimeters, and the rest should be 2.

Abstract title page - where to find a good example?

In order to complete the first page of the report correctly, many students struggle to find a good ready-made form. You can download a sample of the correct execution of the title on the Internet, but be sure to check it for compliance with GOST before filling it out. It is not recommended to take the titles of classmates as examples - thus, you can copy the error without even noticing it.

Among other things, it can be downloaded on our portal in a free format (see the first section).

This article discussed in detail the title page for a college essay and all the issues related to its writing and design: what needs to be indicated in the title, how to format it correctly, and where to find a quality sample that will help speed up the process of its implementation. After reading this article, you will be able to write a really good title for your work.

The title page is the face of the student work, which creates the first impression of it. Whether it is good or bad is up to you. For our part, we will tell you in detail and be sure to show how to write the title page of the abstract so as not to lose face.

What is the importance of the correct design of the title page of the abstract? If the title page is designed incorrectly, then the reviewer, most likely without even reading the text of the main part, will deploy you for revision.

Of course, all the norms and design standards are spelled out in GOST and in the manual at the department. However, before you start writing the title page of the abstract, ask the teacher if he has any personal preferences in the design. Suddenly you got a not very accommodating supervisor.

What exactly should be on the title page of the abstract?

Before you write the title page of the abstract correctly, you need to set the margin sizes:

  • right - no less 1.5 cm,
  • left - 3 cm,
  • top and bottom - 2 cm.

It is worth clarifying the size of the fields with the teacher, as he may not adhere to state standards and change the requirements.

The title page must contain:

  • the name of the university;
  • full name of the department;
  • name of the discipline;
  • the subject of scientific work;
  • student data (full name, course, group number, form of study);
  • data of the checking teacher;
  • the city where the student is studying;
  • year of issue of the document.

Numbering rules and font

Although the numbering starts from the title page, the number "1" is not put down, the same applies to the content page.

In the document, the numbering starts from the introduction page with the number "3".

As a rule, when writing an abstract, it is necessary to adhere to the standard font - Times New Roman and size 14 pt.

Stages of creating a title page

First, conditionally divide the A4 sheet into 4 parts. This is the top, center, right and bottom, and in each of them you must adhere to certain requirements.

By the way! For our readers there is now a 10% discount on

First part

In the first part at the top of the page in capital letters in the center we write: MINISTRY OF EDUCATION AND SCIENCE OF THE RUSSIAN FEDERATION. On the next line, indicate the name of the university and below the name of the department in quotation marks.

The second part

We place the second part in the center: here we write in capital letters the word “SUMMARY”, and after it we indicate the discipline and topic.

The third part

The third block needs to be right-aligned. Here the data of the student and the inspector are written. The position of the teacher is indicated without fail:

Fourth part

And the last, fourth part is drawn up at the very bottom of the page and aligned in the center. Here we indicate the city and year of issue of the abstract.

If the abstract is due at the end of December, then indicate the next year.

It is important to remember that the point is not placed anywhere.

You understand that writing the title page of an abstract correctly is a simple science. However, if you don't feel like bothering to "rivet the title page" yourself, then the student service will do this mechanical work for you. You just have to subscribe to our telegram channel to keep abreast of student life and current news.

Similar posts