How to make a beautiful inscription in photoshop cs6. How to make a beautiful inscription on a photo in Photoshop. detailed lesson

In this lesson we will learn how to create a text inscription.

1. Typing.

To make an inscription select the tool on the left of the panel Type (Text) After clicking the mouse in the desired part of the document and typing text on the keyboard. You can start typing text from a point or select a rectangular area that will define the boundaries of the text.

Click on the picture to enlarge

On the Options panel (Parameters) You can configure the text, both before its introduction, and after.

2. Headset selection

3. Choosing a font style

4. Font size

5. Algorithm for smoothing fonts

6. text alignment

7. Text color

8. Text Warp

9. Palette call

You can change the entire text as a whole, as well as its individual parts.

Note : You can work with and modify text only when the Type tool is enabled in the panel.

We select the necessary part of the text, and in the window that appears, select the typeface.

2. Text color.

To change the text color, we need to select the text or part of it, and select (Text Color) in the panel, as a result, a dialog box will appear. The color can be selected both from the palette and with an eyedropper on the image. After that, the selected part will change its color.

Text color can be created using Gradient (Fill). To do this, you first need to select the letters in the text, you can do this with Magic Wand (Magic wand). The letters will be highlighted with a moving dotted line.

Then choose a fill from the standard ones, or create your own and fill in the selected text.

3. Text style.

Now let's try to change the look of the text using Styles (Styles) on the panel in the upper right corner.

Adobe Photoshop has a standard set of styles that you can modify and add to as needed.

To change the style of the text, we will work in the Layers panel (Layers). In the lower right corner, select the layer with the text that we will change and, then, apply the necessary style to it.

4. Text deformation.

You can warp the text using the button on the Options panel. As a result, a dialog box will appear with a standard set of 15 blanks, as well as no distortion. We select the text and select a specific blank, the text is deformed.

You can position text in a document along any path. First we need to create the outline itself. To create it, use the tool Pen (Pen).

I chose Freeform Pen (Free pen) and drew a freehand outline.

After the text is typed, click on the outline and remove it.

In order to create a quick and beautiful inscription in Photoshop, take as a basis a special manual that can be used at any time you need.

1. Inserting text - the easy way

2. Font selection

3. Stylized inscription

Text in Photoshop is the main tool for the designer's creative intent. Making a short inscription on a photo becomes easier if Photoshop is installed on your computer. There is a whole group of tools for creating beautiful but short messages.

Font Tools

Total exists four types of tools to work with text and create beautiful inscriptions:

• horizontal;
• vertical;
• horizontal text mask;
• vertical text mask.

The effects applied to such layers are similar to those applied to an image:

1. Filters.
2. Transformation and deformation.
3. Edit.
4. Mask.

How to paste text in Photoshop

Open the photo or picture of interest using the " File» and command selection « Open". Before adding, you should decide on the color (default is "black and white") for the inscription. There are two ways to change the color:

• palette for choosing a unique color;
• key "B" to return to the standard set.

On the toolbar (to the left of the workspace), select the desired text tool. We will use "".

The source of the finished text is not important. In a Word document or Notepad, we type the required fragment or phrase. Copy to clipboard using the keys (ctrl + c).

We select the area for the inscription.

Paste using the combination (ctrl + m), or the paste command from the menu. After the area is filled, you can proceed to the primary editing - change type font, size, method of execution (italic, bold).

After, we agree with the selected inscription.

Font change

We activate the tool with a hot key or using the icon with the symbol "T", which will allow you to write text in Photoshop.

By clicking in the working area (on the image) we get a new text layer, in which we select the area for the font.

After entering the last letter, pay attention to editing icons, there are fifteen in all. The first half changes the font and size, and the second half changes the location of the text in the area, its shape (warps) and color. The demo version contains a 3D font creation tool.

Selecting the tab " Editing» from the drop-down list we take « free transform". With this tool you can:

Using the text warp tool, the selected object is distorted, acquiring a visual resemblance to a letter ribbon.

How to create a stylized inscription

Creating stylized text is a voluminous and varied project. Use it as a starting point for further development:

1. Background. In our example, this is a wall.
   
2. Create a new layer and fill it with black. Correcting the indicator opacity» to the desired value. The choice of setting depends on the characteristics of the monitor and color settings. In this case, this figure is 35%.
   
3. Centered we type a phrase: Flay. You can use any inscription and font, in the example it is "impact".
   
4. . Select the layer with the inscription (click the left mouse button while holding ctrl). Save the selected area. Shrink the area to a value equal to 4.
   
5. Delete the resulting area. You should get a linear inscription. Remove selection with ctrl+v.
   
6. Go to menu " layer style". Choose a color.
   
7. Choose outer glow color. Select the size of the shadow. And copy the layer. The same settings will allow you to create three-dimensional letters.
8. With help channel selection creating a neon light effect.
   
9. Changing perspective using transformation. We edit the inscription.
   

So we get neon text on the wall.

How to create your own font in Photoshop

Development from scratch is laborious and very complex work. For a beginner in a graphics program, it is best to use specialized applications, for example, Font Creator or Adobe Illustrator is suitable.

An easy way to create a unique inscription - using primitives layer-by-layer create the required letters from the rectangles.

Desirable sign layers so you don't get confused later.

The finished text project is saved in the format " psd" or " jpg».

The first saves layers and helps you quickly return to work in Photoshop. The second is used for demonstration in social networks. For personal use or storage of the finished project, it is better to choose a format without compression of the quality of the finished image - this is “png”.

CS6 can do more than just create drawings or retouch photos. It has access to text. And not with the usual characters that are in Microsoft Word. Photoshop is a graphic editor - you can make an inscription with an original design in it. Although there are also standard printed characters in the utility. Learn how to rotate text in Photoshop, add effects or textures to it, choose the size, shape. And in general, how to interact with symbols in this program.

In Photoshop, you often have to deal with working with text.

You can design a postcard, flyer or greeting, add a beautiful font to a photo collage, create an outline or shadow for it, add volume, lighting, a gradient. This will give you a unique and attractive character set.

First you need to figure out how to insert text. After that, you can already do something with it.

1. Create a new drawing. Or open the picture you want to add a caption to.
2. In the panel on the left, find the button in the form of a capital letter "T". If you hover over it, a tooltip "Horizontal" or "Vertical" will appear.
3. Click on it with the right mouse button. Select the direction of the label.
4. Click on the place where you want to add symbols. Or select the area in which they should be located.
5. You should write what you need.
6. If you click anywhere, the text borders will "stretch" as you type. You can wrap lines by pressing Enter. If you selected an area, you will have to resize the frame manually.
7. To expand the printable area, "drag" the markers on this border with the mouse. They will be active if the "T" button is pressed.
8. To move a block with text, click on the icon in the form of a black cursor and crosshairs. It's on the panel on the left. Usually at the very top. After that just drag the object. This is similar to moving shortcuts in Windows.

You can do something with any object only if the layer on which it is located is selected. A list of all layers is displayed at the bottom right. To work with one of them, click on the corresponding item.

Editing

Photoshop CS6 has text editing tools. You can choose a beautiful font, style, size, color, alignment. The settings will appear on the top panel if you select the letter layer and press "T".

• To change the calligraphy, click on the drop-down list at the top left. All the fonts you have on your computer will appear. Next to the name is an example of how the signs will look. You can download new character sets if there are not enough pre-installed ones. They must be inserted into the "Fonts" folder, which can be accessed through Start - Control Panel. And the next time you open Photoshop, they will appear in the list. Calligraphy is in .TTF or .OTF format.
• To change the hue of the signs, you need to select them and click on the rectangle at the top. It is the same color as the text. This button opens the palette. You can set the hue manually by moving the slider along the scale and adjusting the brightness. You can enter parameters as numbers. And you can immediately write the name of the color, if you know it. It looks like a code of numbers and Latin characters. To emphasize the inscription, create a stroke of a different shade.
• To reverse a line, click on the "T" icon with small arrows. She is also at the top.
• The size is set in the drop-down list, which displays numbers with the addition "pt" (this parameter is measured in pixels or points - abbreviated "pt").
• To line up, use the Justify Left, Justify Right, and Justify Center buttons. This is an analogue of the options "Left Alignment", "Right Alignment".
• To change the style, select an inscription fragment and right-click on it. In the context menu there will be items "Faux Bold" and "Faux Italic".
• There you can also adjust anti-aliasing: clear, saturated, smooth, hard.

To apply the changes, click on the checkmark on the top panel. To return the original formatting - to the crossed out circle.

Similar options are available in almost any word processor. They are not enough to create design inscriptions. However, this is the basis without which it is impossible to work with symbols. Photoshop has other tools as well. It's time to figure out how to make beautiful text in Photoshop CS6.

Deformation

On the top panel there is a "Deformation" button. It is displayed as a curved "T" and a semicircle. The same setting can be accessed by right-clicking on the layer name. In the drop-down menu there will be a line "Deform text".

In the window that opens, in the "Style" field, select how the line should be displayed: arc, arch, wave, fish, bubble. So you can make an extraordinary design.

effects

The most complex and varied menu is "Effects". You can set a huge number of parameters in it. Detailed settings - even minor details are available. Web designers use these options to create unique and amazing creations.

Let's show the possibilities of effects on a concrete example. Here's how to stroke text in Photoshop CS6:

1. Click on the label layer with the right mouse button.
2. Select Overlay Options.
3. In the list on the left, find the item "Create Stroke" or something similar. Click on it and mark it with a marker.
4. There you can set the shade of the frame, width, position (outside, inside, from the center), transparency, blending mode.
5. To change the texture, click on the "Type" list. There will be a choice between "Color", "Gradient" and "Pattern".
6. A gradient is several shades. The image with it changes from one color to another. That is, in one part of the picture there will be saturated blue, in the other - light purple. You can even make a stroke in the form of a rainbow.
7. Pattern is texture. Go to this point - an example of a drawing will appear. Click on the arrow next to it pointing down - there will be a choice between different images. In the menu that appears, click on another arrow pointing sideways. A menu will open in which you can select style sets - each has its own collection of textures. New patterns are available for download - they must be in .PAT format.

Writing a sentence and adding a frame to it is the easiest thing to do. In the effects menu, you can apply a gradient and a pattern to the text itself, add gloss, embossing, lighting, and shadow to it. Each function has many internal parameters. For example, in the "Shadow" section, there is a size, an angle, an offset, and even a noise effect (similar to a TV ripple).

You can experiment with the settings. When you change some option, the result will immediately be displayed on the picture. The utility has a list of ready-made effects. It's in the "Styles" tab. All parameters are already set in them.

Professional designers and artists work with several layers at once. For example, they copy the inscription, make it transparent, add lighting and superimpose it on the original letters. Then they duplicate it again, use other attributes, and again place it on top of the previous characters. It turns out a multilayer structure. The effects are combined.

Volume

You can write beautiful text in a different way. Create three-dimensional figures from it.

1. Select a layer. Do not select the area with the inscription.
2. Click on "3D" in the menu bar.
3. If you have some model as a 3D file, you can download it and use it.
4. To make a 3D object out of the lettering itself, hover over "New Grayscale Grid". This menu has a very poor selection of features.
5. The New Structure From Layer option converts the entire layer. It folds into a shape like a sheet of paper. There are many objects in this section: a pyramid, a cone, a cylinder, a ball, a cube, and the like.

To create 3D text, it is better to use the effects menu. You can change the lighting, add shadows - and the resulting inscription will look believable and natural. Among the ready-made styles, there are also voluminous ones.

Ready effects

Text effects can be downloaded from the web. With them, you can make an amazing inscription without any effort. Creating it from scratch is undoubtedly more interesting. And the end result is exactly what you want. But suddenly one of the existing designs will suit you.

Neon signs, reflections, letters from ribbons, metal, wood, sand and even ice cream. Just type "Text Effects for Photoshop CS6" into any search engine and browse through several sites. Perhaps the desired font has already been created by someone, and you do not need to make it yourself.

Styles are distributed in .psd files (often packaged in RAR or ZIP archives). This is not an add-on or plugin, but images that can be edited. All the necessary colors and effects are already configured there. Just open the picture in Photoshop and paste your text. Copy and add it to other pictures.

Some styles may use fonts that you don't have. Before downloading an effect, check if it comes with a file with the desired calligraphy. Or look at what character set is there (if this information is in the description) and set it in advance.

If you don't want to look for additional fonts, but you like the style, feel free to download it. When you open a file, Photoshop will warn you that the required calligraphy is not in its database, and will replace it with your own. Then select any character set from those that are already in the program.

You can understand how to write text in Photoshop and edit it. However, the utility has a wide variety of textures, styles, effects, and numerical parameters that can easily get confused. It will take time to learn the program and memorize all its functions. But everyone can make an interesting and unusual signature. You don't need to be familiar with Photoshop to do this. Ready-made styles are also available online. The effects are already placed in them. Just enter your text.

It's no secret that advertising banners, postcards and much more are designed in Photoshop. Perhaps you have an idea and want to create your own motivator or holiday card. Picture matched but don't know how to write text in Photoshop? If you have never written in Photoshop (Photoshop), in this article we will tell you how to use the text tool. We warn you in advance, writing text on a picture in Photoshop is very easy, even if you don't know how to make text in a circle.

Photoshop has a whole bunch of text tools. Working with text in Photoshop takes place on a special type of layer - text.

Open the image you want to write on in Photoshop. Move the cursor to the toolbar and right-click on the icon with the letter T. A group of text tools will open. If you press on the keyboard T(English), then automatically select the text tool, which is the first in the group by default.

As you can see, the text tools allow you to set the orientation of the text, vertical or horizontal.

With the text tool of the desired direction selected, click on the image in the place where you want to make an inscription. A new layer will immediately appear labeled T, which is the text layer. On the image, you will see a blinking cursor, and on the control panel, text settings. They are the same as in the usual text editors like Word. Here you can choose the font, size, style (bold, italic, and so on), set the color and alignment of the text, paragraph, that is, everything that may be needed to write text.

If you open the list of fonts, then in front of each you can see a sample of its spelling in the form of the word "Sample". So you can easily decide on the font. The next attribute will allow you to select the thickness of the writing. But it is not available for all fonts.

Next is the font size, which can be selected from the list. If these sizes are not enough, then by placing the cursor in the list box, you can enter the desired number from the keyboard. If everything in the list is too small, enter a number greater than the last one in the list.

The next option allows you to select the type of text anti-aliasing. It is used to smooth the edges of the written and get rid of the denticles at the ends of the letters.

Here's a good example of Windows anti-aliasing (left) and Smooth/Smooth (right).

The next three attributes are alignments. They are all familiar from text editors. This text alignment is centered, right or left. The next element is the choice of color. Click on it once and select the desired color in the palette that opens.

Attribute with letter icon T, standing on an arc, allows you to set the writing of the text in an arc, in a circle or in another form.

Expanding the next attribute, you will find that almost all of the previous ones are collected here. In addition, it allows you to set line and letter spacing, paragraph indentation, and everything else you may need to write text. You probably know how, because we all used Microsoft Word at least once. Therefore, we will not focus on this point.

Choosing a tool "Horizontal Text", click on the place on the image where you want the inscription. Choose a font, color and size. Changing the font size will change the height of the blinking cursor. This will help you figure out what size your text will be. Write the intended phrase. If writing is complete, click Enter in the numeric part of the keyboard (on the right). You will notice that the name of the text layer has changed to the phrase you entered. If you need to correct the text, change the color of the entire character or a single character, then using the same text tool, standing on the text layer, click on it. Your cursor will flash again. Text can be selected, characters can be deleted (erased) in the same way as in Word or another text editor. You need to move the line with the key Enter on the alphabetic part of the keyboard.

If you plan to write a long text, set its area in advance so that it does not go beyond the boundaries of the text container. You can then change this area manually. Select the text tool. Before writing, hold down the left mouse button and drag the mouse as if you would like to select an area. You will have a container for text with vertices. Then, by dragging these vertices, you can change the size of the container with the text. So your text will not run into the invisible zone.

To move the text, simply stand on the layer with it, using the "Move" tool (called by the key V) grab the text by holding the left mouse button and move over the image.

To rotate the text, stand on the layer with it and click ctrl+t. This works in the same way as in the case of rotating a normal layer. When a frame with vertices appears, move the cursor to the corner. As soon as a rounded arrow appears on the cursor, start rotating the image in the desired direction. When done, click Enter.

Adding a shadow and stroke on the text is done in the same way as on a regular layer. We have covered this in previous articles. To add a shadow and stroke, you need to call Blending Options(bottom panel in the layers palette, bottom right corner).

In the dialog box on the right, select "Stroke" / Stroke, or "Shadow" / Shadow. In the right part of the window, select the desired size, color and, when completed, click Ok.

Now let's look at how to make text in a circle. There are two ways to do this. We touched on the first one a bit when we described the text tool's control panel.

Write text. The cursor should blink while waiting for the next character to be entered. Now on the toolbar, click on the letter icon T standing on an arc. Choose from the list Arc Text/Wave.

Values Horizontal Distortion and "Vertical Distortion"/Vertical Distortion leave in position 0 . "Bend" / Bend move as far to the right as possible. Click when finished Ok.

Now select the text tool and click on the edge of the circle. It will turn into a text outline. You will see a blinking cursor. Start typing. If the text is not all included, pay attention to the cross and the dot on the outline. Press English on the keyboard A, the tool is activated "Outline selection". By moving the cross and the dot along the outline of the circle, you can shift the text along the circle and increase the line so that words that you did not find when you entered entered the field of view.

Adjust the resulting text by moving the layer with it so that the inscription is around the cup. Everything!

As promised at the beginning of the article, making text in Photoshop is as easy as in any text editor. We wish you new ideas!