Watch how to make fangs. Is it possible to build up and sharpen fangs at home, how to make artificial teeth in a dental clinic

How to make vampire fangs at home? for Halloween

buy artificial nails file and buy dental wax
Instruction

Catch a vampire, rip out his fangs and use it to your health. This is of course the easiest way. For those who are not looking for easy ways, below are three more.

Method one: you can make fangs out of soft plastic. Now on sale a huge number of children's kits for creativity. Buy a modeling kit and deprive the child of his white part. Having formed two pretty little fangs, try them on if they suit you? If there is no doubt, and your reflection (with the appearance of fangs, the reflection in the mirror until it disappears, do not worry) you like it wonderfully. Put your teeth in the oven, they will harden and delight you with their presence. Warning: if you are going to gnaw not on a human neck, but on something harder (an apple, for example, or a cracker), remove the fangs, they will suddenly break, all the work will be in vain then.

The second way is for those who are simply interested in the fact that they have vampire fangs, but no one is going to demonstrate them in crowded places (you never know the breath is stale, for example). Open photoshop. Think again. If you change your mind, you can close Photoshop. If the desire to see yourself in fangs has not gone away, take a picture of yourself with a webcam with your mouth open (your mouth is open, not your webcam), upload the picture to Photoshop, pull out two fangs for yourself (do not overdo it, you don’t need more than two), get the joy of watching. You can show photos to others.

Finally, the third method is the most unreliable, but suddenly someone needs it. Carefully remove the tips from the cotton swab, i.e. its cotton component. You can throw away the wand, you don't need it. But on each cotton tip, drop a drop of nail glue, press the cotton to your teeth, hold for a bit. The method is not good because if you close your mouth, then the cotton wool will soften, and the fangs will look completely unnatural. Therefore, you will have to walk with your mouth open all the time. But, on the other hand, fangs were made for show, right? And this means that it is not shameful to walk around with an open mouth.

insert tubes from under coca cola)))

How to make vampire fangs?

Today, the vampire image is actively promoted in society. Shelves of bookstores are filled with works by En Reis and similar authors, serials and movies about vampires do not leave television screens, and heroes of all kinds of vampire sagas often flaunt on the front pages of glossy magazines. If you want to contribute to the popularization of the vampire movement and at the same time surprise others, you will have to work hard on your appearance. In this context, not only makeup and hair are important, but also the main component of all vampires - fangs! In this article, we will talk about how to make vampire fangs. It is to make, and not to buy ready-made props. As it turned out, there are many ways to make vampire fangs at home. Let's talk about the most interesting ones.

The easiest way to make fangs from an apple. To do this, cut out two cone-shaped parts from a solid fruit with a thin knife or a fountain pen pen. Next, we put the carved fangs on our own teeth and try not to close our mouth. Otherwise, saliva will do its insidious work. This method will appeal to those who need fangs for a short period of time. For example, to scare a wife or a friend.

A great way to make durable fangs is to use plastic. Fortunately, it is not problematic to buy special material today. Soft plastic kits are available in many stores. Especially in those that specialize in the sale of elements for the so-called "hand-made". If you do not know about the intricacies of using soft plastic, be sure to consult with the seller. When you get home, mold the pieces that look like fangs and put them on your teeth so that the plastic takes the desired shape. After that, you should send the blanks for a couple of minutes in the microwave or a conventional oven. Under the influence of heat, the plastic will harden and you will have excellent fake fangs in your hands.

Continuing the conversation about how to make vampire fangs at home, one cannot pass by another popular method, which is to use false nails. To implement this method, buy tips and glue. Try on your nails in front of a mirror so that they look normal in combination with the rest of your teeth. The selected tips need to be filed with a nail file so that they take the form of fangs. Next, take a little glue and glue the edge of the sawn-off nail onto the tooth. If you find it difficult to perceive information from the text, see how to make vampire fangs on video.

How to make vampire fangs at home

There are many ways to make the fangs of a mythical creature - a vampire, which will look like real ones, which will ensure the delight of those present at a festive party dedicated to the theme of the night, ghouls, witches and other dark characters.

In order to make vampire fangs, you will need ordinary plastic utensils, which must be chopped into pieces. Then put the ground plastic in a small plate, and pour boiling water over it. You can make vampire fangs when the plastic becomes soft. It must be removed from the water with a spoon and formed from the softened material into the shape of a pointed tooth. Then fix it on your incisor using a tool designed to fix the false jaw.

If you're looking for an easier method to make vampire fangs, plastic fake nails are the way to go. Having bought a set, you should choose a tip that is suitable in size, give it the necessary shape with a nail file. Having tried on a prepared fang on your tooth, you should cover it with white acrylic paint, you can also use matte nail polish. Making vampire fangs is easy, you just need to wait for the paint to dry and stick the finished attribute on the tooth with nail glue or dental wax, which you can buy at the pharmacy.

A plastic fork is quite suitable as the material needed to make vampire fangs. To do this, you need to carefully remove the middle teeth on the plastic fork using sharp scissors, which also removes the handle of the plastic device. Such fangs should be positioned in the center of the upper teeth, applying a small amount of fixing wax to the horizontal edge of the fork.

If you need to make vampire fangs in order to quickly scare someone, then you can use a simpler option, in fact, one-time. In this case, you will need cotton wool and nail glue. You can make vampire fangs with the help of these items, if you drop a drop of glue on the cotton wool rolled to the right size and press it against your teeth. However, it is worth remembering that you don’t look like such incisors for a long time: if saliva gets in, they will quickly get wet. But for prank friends is quite a great option.

You can make vampire fangs from non-toxic clay, light-colored material is suitable for molding a tooth of the required shape. After the pointed chisel is ready, you can stick it to your teeth, but you must definitely wait until the clay hardens.

It is much easier to attach artificial fangs with braces, and if you have them, then you can make vampiric teeth from the wax intended for attaching the structure and place them between the braces wire and your own teeth. You can make vampire fangs from an ordinary white straw, the walls of which should pass between the teeth crevices. You just need to cut off a piece of the tube and give it a triangular shape, and then put it on the incisors.

Prepare everything you need. This method will help you create realistic vampire fangs, but it will take a lot of time and money. Here is a list of materials you will need:

Make a mouthguard out of a plastic cup. Cut off the top of the plastic cup with clean scissors. The remaining bottom should be slightly larger than your upper jaw. Cut off one side of the cup to make a hole to fit in your mouth.

Skip this step if you have a real mouth guard or are planning to buy one.

Mix the alginate press mass and grease the mouthguard with it. Read the instructions for more detailed information, as the exact time and method of preparation may vary depending on the manufacturer. In most cases, you need to mix alginate and water in a 1:1 ratio in a small bowl using a special tool. When finished, lubricate the tray with a mixture of alginate.

You need to work fast enough if you are using alginate. Such a mixture will begin to crack and disintegrate within a few hours.

Press the upper teeth into the alginate. Gently press the alginate-lubricated mouth guard against your upper teeth. After three minutes, remove the mouthguard by pulling it down sharply. You should have a cast of your teeth. You will use it in the next step of the work. If there are bubbles or damaged areas on the mouthguard that spoil the appearance of the cast of your teeth, repeat the entire operation from the very beginning.

Don't put the mouthguard too high on your teeth, otherwise they will peek out from under it.
Wait for the alginate to harden before removing it.
If you want to know the exact time of alginate readiness, put a small piece of it on your finger and wait for it to harden.

Mix two-component plastic resin or other moldable material. Any solid cast material may be used, but the following instructions refer to a two-component plastic resin. Mix 90 ml of one liquid with 90 ml of another in a glass or plastic bowl. Stir with a mixing stick or kitchen whisk.

Choose a two-component plastic polymer that dries quickly and mixes quickly. The polymer should not be toxic after drying.

Pour plastic resin into the dental impression. Immediately after mixing both liquids, carefully pour the resulting solution into the alginate impression. Pour slowly to prevent bubbles from forming. Wait for complete polymerization before removing.

After a few minutes, the plastic polymer will become very hot and turn white. Don't touch it with your hands.
After the plastic resin has dried and cooled, wait another 10 minutes and then remove it from the impression. This time is necessary for drying, so that the plastic impression of the teeth is guaranteed to be solid after extraction.

Make fangs out of what you got. Take out the plastic cast of your teeth once it is dry. Place the clay on the cast where you want to make the fangs and use a small sharp object to shape the teeth into the desired shape.

Soak the resulting cast in soapy water. Add soap to a bowl of water and soak the cast along with the clay fangs for ten minutes. This will help prevent the alginate from sticking to the clay.

Make another impression from alginate. Repeat the procedure to make another impression. But this time, use a plastic resin cast with canine teeth attached instead of your own teeth. Press gently to keep the canines from moving and lift the impression slowly once the alginate is ready. Check for bubbles or debris in the alginate.

Remove the clay fangs and smear the cast with petroleum jelly. Unstick clay fangs. Using a Q-tip, wipe the impression with petroleum jelly (Vaseline) along the edges, but without clumps. This will make it easier for you to remove the acrylic fangs when they are ready.

Mix acrylic nail paint. Mix the acrylic powder with the liquid and mix thoroughly with an unused tool in a mixing bowl you don't mind throwing away. Not use what you want to use in the future. Continue stirring for a few minutes until the mixture turns into a paste. When you remove the mixing stick from the bowl, there should be a string of acrylic hanging from the mixing stick. Add more powder if the mixture is too thin, or more liquid if it is too thick.

How to make vampire fangs?

"Apple Teeth"

Plastic

Tips and glue

Now the image of bloodsuckers is promoted from everywhere: from the covers of magazines, books and even brochures, TV displays and computers. Of course, the specific appearance of the descendants of Count Dracula will not go unnoticed on the scariest holiday of the year - Halloween. To make the image look the most realistic, you need not only to apply the appropriate makeup, but also to acquire fangs. How to make vampire fangs at home in order to save at least on this item of appearance? Vampire addicts have come up with several ways, some of which I especially like, I will give below.

Option 1 I met a lot of jokes about the fact that you need to catch up with a real vampire and appropriate his fangs. Jokes are jokes, but there is still some truth to this. You can ask friends who have ever performed under this image, their secret of success - that is, the method of making fangs. The information is not so secret that it was not customary to share it in wide circles.

Option 2 There is another, easiest and safest way - you need to take a pen from a fountain pen and cut in regular apple two cone-shaped parts, and then just put them on your own fangs. For me, this method is not suitable, because I can’t walk with my mouth open, on which a delicious piece of my favorite fruit is fastened. =(

Option 3 A more time consuming method − soft plastic blades, which can be obtained at any store that sells art supplies. We stick the plastic on the fangs so that it takes the desired shape, and then put it in the microwave for a couple of minutes. The plastic will harden and you will have fake vampire teeth in your hands.
Option 4 An unreliable and inconvenient way, suitable for those who need to wear a short time, for example, to scare a husband or girlfriend. We take a cotton swab. Wet both ends abundantly and tear off the stick. On the cotton balls drip glue and sculpt on the teeth. I warn you right away - cotton wool gets wet, so you won’t be able to lick your teeth erotically, because a shaggy tuft will immediately hang from them, but it looks at least funny.
Option 5 The most reliable and great (in my opinion) way. Everything is simple and the image will not fall apart after 5 minutes. In the store you will need to purchase a set for gluing nails, we need specifically tips and glue. At home, we try on nails on ... teeth in front of a mirror. To pick up the nails in size, I think, will not be difficult. Then we file the tips so that they take the form of realistic large fangs. Then we drip just a little glue on the edge of the nail and sculpt, looking at our reflection and admiring the result. It turns out very realistic and durable.

Modern innovative technologies in the field of dentistry allow you to restore the beauty and health of your teeth in the shortest possible time. The most popular and affordable dental procedure is extension. The purpose of aesthetic restoration is to eliminate defects and restore the coronal (visible) part of the tooth.

Why do you need to grow fangs?

The main task of the dentist is to recreate the affected tissues, replace lost teeth and restore their structure with the help of overlays made of composite materials or prosthetics. After dental intervention, the smile should look as natural as possible. Anterior teeth extension is indicated in the following cases:

the presence of chips and cracks;
cracks and damage to the enamel;
congenital weakness of tooth enamel;
deterioration of enamel due to age-related changes;
curvature of the teeth and their abnormal growth;
pathological bite;
traumatic injury;
generalized caries;
the formation of spots and defects of various sizes, shapes and colors on the enamel surface.

Contraindications

List of restrictions for the procedure:

Extension methods

When choosing a method of extension, the dentist takes into account the degree of destruction of the canine and the wishes of the patient regarding the cost of medical services. Modern orthopedic dentistry offers several options:

direct

The extension is made directly in the oral cavity. In the arsenal of dentists-therapists there are photopolymers (light-curing filling materials). The material is applied to the prepared tooth in layers. The thickness is selected, focusing on the anatomy of the dentition. The hardened material is ground and polished. The duration of the procedure is no more than one hour per extended tooth. Fangs grow in one and a half to two hours.

Restoration with veneers

If only the front surface of the tooth is destroyed in the patient, or the color of the enamel needs to be corrected, restoration with veneers is performed. The main work takes place in the dental laboratory of the orthopedic department of dentistry.

Veneers are porcelain or composite false plates that replace the vestibular layer of the teeth. Lumineers, or ceramic veneers, are much thinner, they are fixed without turning the fangs. With the help of plates that are indistinguishable from real tooth enamel, you can mask aesthetic defects, microcracks and hide the uneven color of the tooth. Artificial teeth made of veneers will last no more than ten years.

Installation of an artificial crown

If the canine is severely damaged, then the patient is invited to build up with the help of crowns, which restore the anatomical shape of the tooth. In the absence of a history of hypersensitivity to metals, classic metal-ceramic crowns are used. An alternative to them are crowns made of ceramic and zirconium oxide.

Restoration is carried out in stages: first, the dentist prepares the surface of the tooth, grinding and eliminating the affected areas on the outer walls; At the second stage, a cast, or impression of the tooth, is taken. Metal-ceramic crowns are one and a half times cheaper than artificial ones.

Stages of the procedure

Artistic restoration of fangs is not complete without a complex of preparatory therapy and preventive measures. Training can be conditionally divided into 2 types of procedures - general preparatory and direct mandatory. The first ones are carried out at the request of the patient and if there are indications, and the second ones are a preliminary part of the restoration of tooth tissues. The dentist pays attention to the condition of the oral cavity, to the dental tissue and gums.

Professional scaling, plaque removal, and caries treatment may be required before fangs are made. Then an impression of the future canine is made. With the help of the cast, the appropriate shape and dimensions are determined.

An important step in building canines is preparation. This procedure, which involves the removal (grinding) of surface dental tissues, is necessary for high-quality adhesion of the composite to natural tissue. Preparation requires extreme caution: the doctor must sharpen the structure so as not to injure the deep layers of bone tissue.

These methods have obvious advantages over implantation and prosthetics. Building is actively practiced in pediatric dentistry.