@Determination of ovulation. Signs. Weak ovulation: why the test does not work

The ovulation period is the most optimal time for conception. And if you have information about when exactly it happens, you can increase the likelihood of pregnancy by an order of magnitude. Now, in almost every pharmacy, you can freely purchase ovulation tests that react to the amount of certain hormones in the blood, the level of which rises just before the release of a mature egg from the ovary. When the test shows a couple of obvious stripes, it's the right time to conceive. But sometimes women face such a problem when the second strip on the ovulation test is weak, let's clarify what this phenomenon means.

In order to understand what the appearance of an unexpressed second strip indicates when performing an ovulation test, you first need to understand the very principle of such a test.

So, ovulation can be described as the release of an egg. It matures and develops inside a fluid vesicle located inside the ovary. After the cell grows to the desired volume (fully matures), it naturally breaks through the bubble, after which it moves inside the genital tract. It is here that the egg can meet with the sperm, which, under favorable circumstances, can result in conception.

At the moment of rupture of the bubble, an active production of a significant amount of luteinizing hormone occurs. Therefore, the jump of such an indicator determines the release of the egg. And the test showing ovulation is coated with a special substance that reacts to the presence of luteinizing hormone in the female urine. Upon contact with such a hormone, the substance changes color, and a second strip appears. The more hormone in the urine, the brighter its color.

Thus, a simple test strip allows you to timely determine the moment of rupture of the follicle. And the couple has the opportunity to ensure the supply of sperm to the mature egg.

At the same time, there simply cannot be such a thing as “weak ovulation”. The cell either ruptures the follicle and exits, or it doesn't.

The test may show a dim line if performed at the wrong time.

In the urine of a woman, a small amount of luteinizing hormone is always present, even outside the period of ovulation. And the test reacts to it with the appearance of a weak strip. Therefore, it is important to know when it needs to be carried out. So, most often ovulation occurs around the middle of the menstrual cycle (the interval in days between the first days of menstruation). Usually its duration is twenty-five to twenty-nine days, although there may be deviations in different directions.

Ovulation occurs on the verge of two different periods. In the first, the cell matures, while the second takes the formation of a corpus luteum in that part of the ovary that was damaged during the rupture. It is it that will be responsible for the production of the hormone necessary for the growth and development of the embryo. Doctors assure that the duration of the second period of the cycle is always eleven to fourteen days, and the duration of the first may vary.

Thus, in order to catch ovulation, doctors usually advise subtracting the number seventeen from the length of the cycle, and from that day on, start testing every day. In some cases, it may take up to five days before a bright streak is detected.

The test may show a faint line if performed incorrectly.

In order to get a reliable result, you must:

Collect some urine in a sterile container;
- dip the test into this liquid to a certain mark and wait a couple of seconds;
- remove the test and wait five minutes;
- Evaluate the result.

If you test once a day, do it at the same time every day. When there is a chance to miss the moment, you can take two measurements per day (about ten in the morning and eight in the evening).

At the same time, it is important:

Do not use for analysis the first portion of urine after a night's rest;
- do not adhere to a particularly intensive drinking regimen;
- do not go to the toilet for at least three hours before collecting urine.

Other causes of the appearance of a weak strip

An insufficiently bright strip can be observed:

When undergoing hormone therapy;
- in the presence of hormonal disorders;
- if the test strip is stored incorrectly or is of poor quality.

It is important to note that sometimes a slight strip can be observed even when an early release of the egg has occurred (already a day after ovulation has occurred, the level of luteinizing hormone stabilizes). This situation is possible:

With constant stress;
- with a change in climate and time zones;
- different diseases.

Sometimes ovulation in the body does not happen at all, in which case the strip will not be able to look bright, even if tests are performed daily.

To become a mother, women use special tests to help determine the ideal time to conceive. They allow you to find out in time about the readiness of the egg for the birth of a new life. Sometimes an ovulation test shows a weak second line, which does not always mean that a woman has a hormonal imbalance. Incorrect manipulations during the procedure, violation of the instructions leads to false results, incorrect interpretation.

Expectant mothers come up with numerous ways to determine the ideal time for conception. You can measure basal temperature, build graphs, count days. Modern pharmacology offers a wide range of products for determining ovulation. You can buy them in a pharmacy in the form of a tablet device, reusable testers, inkjet, electronic device. Test strips are more affordable. They are tested starting from a certain day of the cycle.

An ovulation test shows when a follicle ruptures. The test strip reacts to the level of luteinizing hormone in the urine, which rises 1-2 days before ovulation. The brightest strip will be at the time of the release of the female egg.

You will not be able to get pregnant if the ovulation test does not show ovulation. The absence of the second line indicates the unpreparedness of the body for conception (there was no rupture of the follicle), a hormonal failure, or the absence of ovulation. With anovulation, testing is carried out over several cycles.

If the second line is barely visible

A weak second line on an ovulation test puzzles many women. The question arises, what does this mean, is it possible to talk about the beginning of the long-awaited period, or about anovulation. If the ovulation test showed a weak second strip, you need to pay attention to the following points.

Perhaps the wrong day has been chosen. The test does not show a second strip if the follicle has not yet ruptured or a long time has passed since the release of the egg. It is recommended to start testing on the 10-11th day of the MC until a clear second line appears. In the first day or two of testing, the absence of a second band is the norm.
There will be a false result if the ovulation test is expired. It is necessary to pay attention when buying to the correct storage of the product, expiration date.
The second line will be barely visible when the second phase of the menstrual cycle has not come, the level of luteinizing hormone is not enough to break the egg. It is worth carrying out the procedure in the following days.
The second weak line, which does not go away after a few days, does not change its intensity, indicates a defective product.
The cause of a weak strip may be a hormonal imbalance. In such a situation, it is better to be examined by a gynecologist, to take tests for hormones related to pregnancy planning. It will be necessary to follow the dynamics of the development of the egg on ultrasound.
Sometimes the reason for the misinterpretation of the test is excessive consumption of water, any other liquid. The ideal time for testing is from 10 am to 8 pm. Then the concentration of the hormone in the urine will be maximum. The day before testing, you should not drink a lot of liquid, it dilutes the urine, lowers the level of luteinizing hormone.
Anovulatory cycle - the absence of ovulation, which is sometimes typical for every woman. Normally it happens several times a year. As a woman ages, the number of anovulatory cycles increases. It is worth contacting a gynecologist when, as a result, a weak second strip is observed for 2-3 cycles.

Gynecologists warn: the test result will be correct if the procedure is carried out correctly. Every woman has her own menstrual cycle. Dividing the full cycle in half will help determine the ideal time for the test; 3-4 days must be subtracted from the date obtained. The interval between testing should not be less than 8 days.

What distorts the result

The appearance of a weak strip on an ovulation test in some cases indicates non-compliance with the instructions. Despite the minor nuances of using tests from each manufacturer, they coincide in one thing:

Collection of biological fluid in a clean container.
The test is placed in a biological fluid up to a certain mark and kept for some time in accordance with the instructions in the instructions.
After a few minutes, look at the result.

An expired expiration date or torn packaging can lead to a distortion of the test result.

Getting acquainted with the reasons for the distorted result, which was shown by an ovulation test in the form of a weak strip, we can conclude that there is no hormone release. The reason may be:

Reception by a woman of drugs containing hormones. This results in an irrelevant reaction of the reagent.
Hormonal changes in the body.
Insufficient time has been sustained during testing.
Violation of the rules for storing the test or its marriage. The presence of these shortcomings will be indicated by the absence of a control first strip.

There is nothing difficult in understanding the rules of analysis. When a follicle ruptures, the level of LH in a woman’s body rises, which can last for a day, after which it decreases to normal. And if the woman continues to do tests, she will not see any color changes. The reason for the early maturation of the cell can be:

Regular stress.
Vacation in a country with a different climate.
Infection.

You will have to seek help from a gynecologist if the second strip in the test is pale and appears within two to three cycles. As a result of the diagnosis, the doctor will be able to determine the causes.

Other ways to determine ovulation

To determine ovulation, you can choose any of the methods described below:

calendar way. This method of determining ovulation is simple. Only by taking notes and making regular marks on the calendar, the result can be obtained in one year.
Method of observation: it is impossible to give 100% determination of ovulation using this method. The appearance of characteristic signs can be observed on the eve of ovulation, which are poorly expressed in its process.
The method using ultrasound: an ultrasound examination is most often performed in case of problems with conception.
How to measure basal temperature: To obtain a specific conclusion about the date of ovulation, it is necessary to measure regularly for three to six months.
Test method. In the case of using the test, the result will depend on the level of LH hormones. The second line on the ovulation test may be pale, barely noticeable.

With the help of these methods, a woman can determine the ideal moment for conception.

Many women feel when they are ovulating. At this time, the viscosity of vaginal discharge increases, sexual desire increases, and pain in the ovary area may be felt. However, for effective pregnancy planning, you cannot rely on these feelings. It is necessary to regularly conduct an ovulation test, which will make it possible to determine the most favorable moment for fertilization.

Why carry it out?

Ovulation is the moment when an egg ready for fertilization is released from the follicle located in the ovary into the abdominal cavity, and then into the fallopian tube. Here it will unite with the sperm, resulting in the formation of a zygote. She will move to the uterus, where the further development of pregnancy will take place.

In order to accurately determine the time of release of the female germ cell from the ovary and the best time for conception, it is very convenient to use a special test strip. This simple study will help a couple plan their pregnancy.

Operating principle

Ovulation can be determined using a regular home test, which is sold at any pharmacy. The principle of the study is based on the exact determination of the concentration of luteinizing hormone in the urine. The level of this substance in women varies depending on the period of the menstrual cycle. Just before ovulation, it reaches its maximum values.

The ovulation test makes it possible to register such an increase in the level of luteinizing hormone, the peak of which will indicate the onset of ovulation. It works on the same principle as a pregnancy test. It uses other substances that respond to an increase in the concentration of luteinizing hormone, and not human chorionic gonadotropin.

On sale there are devices for determining luteinizing hormone in saliva. They are more convenient, designed for repeated use, but have a high price.

A positive ovulation test indicates that the best time to conceive an unborn baby is in the next 2 days.

Some women use such testing to determine "dangerous days" in the calendar method of contraception. However, the effectiveness of this method is low. Spermatozoa that have entered the genitals of a woman can linger in them, "waiting" for the release of the egg. Therefore, it is possible to become pregnant with sexual contact that occurred before the release of the egg.

Rules for holding

Most tests contain 5 strips. This is due to the fact that it is extremely rare to calculate the moment of ovulation at once, and repeated studies significantly increase the accuracy of diagnosis.

What day is the right time to do an ovulation test?

You need to start testing on the eve of the expected date of release of the egg. It is necessary to determine the duration of the menstrual cycle and subtract 17 days. If the cycle lasts 28 days, you need to start the study from day 11, counting from the first day of menstruation. With irregular menstruation, the average value of 4 or even 6 cycles in a row should be taken as a basis.

How to use an ovulation test?

Each box contains detailed instructions. You just need to place the test strip in a container of warm urine or substitute it under the stream when urinating, and then dry and save. The next strip is used in exactly the same way at the same time. This is repeated until a positive result is obtained.

within 4 hours do not drink water and other liquids;
do not urinate at least 2 hours before testing;
do not use the first portion of urine obtained in the morning;
the best time for testing is from 10 am to 8 pm.

Ovulation test results

After completing the study, a woman can get the following indicators:

absence or very weak line (significantly paler than the control) - the test is negative;
there are both strips, not counting the control - the test is positive.

If the test is negative, it means that some more time will pass before the release of the egg.

If the test showed two stripes, this indicates a possible release of the egg from the follicle within the next 12-48 hours. The brighter the second strip appears, the greater the concentration of luteinizing hormone, and the closer ovulation. A positive result persists for 1-2 days, rarely for 3 days.

If none of the strips is visible, this is a sign that the test is not suitable for use.

A positive test confirms the highest fertility during the menstrual cycle. If a woman is trying to get pregnant, she needs to plan sexual intercourse within the next 3 days after ovulation.

False test results

It may happen that the test result is positive, but ovulation does not occur. Substances that react to the concentration of luteinizing hormone in the urine are very sensitive. Therefore, there is a slight chance that they will catch a small increase in the concentration of the hormone.

The most effective way to confirm ovulation is with an ovarian ultrasound. Many women measure at the same time as testing. This is a simple and informative way to find out at home about the onset of ovulation. The temperature in the rectum rises the next day after this. Combined with testing, this gives an accurate result.

Sometimes, despite the negative result, ovulation still occurs. This is usually due to non-compliance with the instructions for using the test. The study should be carried out at the same time, in the afternoon or in the evening. In addition, an irregular cycle may be the cause, and then other methods are used to determine the time of release of the egg.

Contraindications for use

The results may be distorted under the influence of hormonal drugs prescribed to a woman for gynecological diseases (, and others). However, these drugs in most cases also have a contraceptive effect, so getting pregnant while taking them will not work.

Ovulation tests are not performed during pregnancy or after menopause.

Best Ovulation Tests

In pharmacies, you can buy test kits from different companies. Let's consider some of them.

Clearblue Digital Ovulation Test

Shows results with 99% accuracy. It consists of a plastic case and a test module. Before starting the study, you need to remove both parts of the test and insert the strip into the case until it clicks. Then you need to wait for the flashing symbol to appear on the body of the device. It will show that the test is ready to use.

Ovulation test "Clearblue"

Next, you need to collect a portion of urine in a dry, clean container and place the absorbent part of the strip in it for 15 seconds. You can simply put the end of the test module under the stream while urinating for 5 seconds, but there is a danger of wetting the device itself.

The housing can be placed on a flat surface or held with the sampler facing down. You can not lift it with a strip up. After half a minute, a flashing signal will appear, indicating that the result is ready. After that, you need to remove the test, remove the cap from it and wait 3 minutes.

After this time, a “smiley” will appear on the body of the device. This means that ovulation has come, and the best time to conceive is the next 48 hours. If the circle remains empty, then the hormone level is normal. After that, you need to throw away the strip, and the next day, repeat the study.

No need to pay attention to the stripes that appear on the test module. You can find out the result only on the display of the device. It is displayed for 8 minutes.

The digital ovulation test is highly accurate. When using it, you do not need to independently evaluate the brightness of the strips. This makes Clearblue one of the best products in its segment. It is more expensive than conventional strips, but it is more convenient to use and more reliable.

Frautest for ovulation

If a woman has a reason to use not an electronic device, but test strips, Frautest will suit her. The kit contains 5 strips for determining luteinizing hormone, as well as 2 tests for diagnosing pregnancy. In addition, there are 7 containers for urine, which increases the convenience of use.

Frautest ovulation test strips

The strip should be immersed in the container with urine in the direction of the arrows up to the Max mark, it is not necessary to immerse it deeper. After 5 seconds, you need to remove the strip and put it to dry on the edge of the container with urine. Colored lines will start to appear after a minute, but the final assessment is made after 10 minutes. If 2 bright lines appear, the test is positive. It is not recommended to evaluate the result after 30 minutes or more.

The test is one-time, after use it and the urine container must be thrown away.

Other popular test strips are Eviplan, Ovuplan, Femiplan.

Tablet tests

Devices that combine ease of use and accuracy - tablet, or cassette.

Tablet (cassette, inkjet) test for ovulation "Femitest"

These are reusable devices that determine ovulation in the urine. It is enough to substitute the window of the device under the jet, and after a while one or two strips will be displayed on the screen. Examples of such tests are Frautest, Evitest, Ovuplan Lux, Femitest cassettes.

Electronic test that determines the level of estrogen in saliva

Considered the most reliable. Hence its high cost. The principle of its work is to study a drop of saliva under a microscope. Before ovulation, salt crystals begin to form in it, first forming horizontal and vertical lines, and at the time of ovulation, a pattern resembling a fern. If ovulation has not occurred, the saliva sample contains only individual grains - “sand”.

The readings of this test do not depend on the level of luteinizing hormone. Therefore, it is especially suitable for women with hormonal disorders.

The simplest device in the series is the MaybeMom microscope. It is equipped with good optics and gives a reliable result in 98% of cases. The OVU test allows you to examine not only saliva, but also cervical mucus. Eva-Test is a mini-laboratory, fully computerized and independently issuing ready-made data on ovulation.

Test microscope "Maybe Mom" for determining ovulation by a drop of saliva

Electronic tests that determine ovulation by saliva are considered the most accurate. Compact microscopes are easy to use and convenient. They are reusable, there is no need to constantly buy test strips. You need to examine saliva in the morning, before drinking water and brushing your teeth.

Some devices, such as Eva-Test, make it possible not only to determine ovulation, but also to protect yourself from pregnancy, to notice the threat of miscarriage in time. Such an ovulation test shows pregnancy for a period of 1 week. It is able to help in the diagnosis of gynecological diseases and even determine the sex of the unborn baby. Although consumer reviews speak of some inconvenience of the device, the need to reconfigure it and the high price, for some women it is best suited.

The Vesta device also belongs to this category. Manufacturers claim that such devices also show "safe" days, the level of hormones in menopause, a possible reason for the lack of menstruation.

FAQ

What is the chance of pregnancy on fertile days?

The chances of getting pregnant will vary from cycle to cycle and from woman to woman. It depends on many conditions such as the age of the woman, her partner, general health and lifestyle. On average, the probability of pregnancy on the day of ovulation is 33%.

What is the difference between using most ovulation tests and the Clearblue Fertility Monitor?

Most ovulation tests detect the release of luteinizing hormone, which occurs about 24-36 hours before the release of the egg. They help clarify the 2 most fertile days of the cycle - before ovulation and during this process. The Clearblue Fertility Monitor digital test determines the level of two hormones - luteinizing and estrogen. It detects up to 5 extra days when a woman can become pregnant by detecting a rise in estrogen.

I recently stopped taking birth control pills. Could this change the result?

No, this will not affect the results. But if a woman has only recently stopped taking hormonal drugs, she may have irregular cycles. This leads to difficulties in determining the day of testing. Therefore, it is better to wait until 2 consecutive cycles without contraceptives have passed, and only then start using ovulation tests.

My cycle is outside the range shown in the instructions. How do I know when to start testing? When to test for late ovulation?

If the cycle is less than 22 days, you need to start testing on the 5th day, counting the first day of menstruation. If the cycle is more than 40 days, you should start testing 17 days before the expected start of menstruation and continue testing even after 5 days.

I have been using the clearblue test for several months in a row and have not gotten pregnant. Maybe I'm infertile?

It happens that a healthy woman cannot become pregnant for many months. A doctor should be consulted after a year of unsuccessful attempts if the woman is under 35 years old. If she is 35-40 years old, this should be done in six months. If a patient older than 40 years has never been protected and has not become pregnant, an urgent need to go to a gynecologist.

I did all 5 tests according to the instructions, but did not detect ovulation. What to do?

If the cycle length changes monthly by more than 3 days, a new pack of the test must be started. If the cycle is normal, then it was neoovulatory, that is, there was no release of the egg. It will no longer be possible to get pregnant this month, but this is a normal phenomenon for the female body.

Do I need to use all the tests in the suite?

No. It is possible to stop testing after ovulation and save the remaining strips for the next cycle.

I did the test incorrectly, what should I do next?

The best solution is to conduct another study on the same day 4 hours after the failed one. At this time, you need to drink less and not urinate. If the urine was collected in a plastic container, you just need to take another strip and analyze it right away.

When are the chances of getting pregnant the highest and lowest?

The peak of the possibility of conception occurs on the day of ovulation and the day before it. A high probability of pregnancy appears 4 days before. Outside of these 6-7 days, the chance of getting pregnant is low.

What is the difference between ovulation days and "fertile" days?

Ovulation is the release of the female germ cell from the follicle, this happens 12 to 16 days before the start of the next menstruation. A woman is most fertile on the day of ovulation and on the previous day.

"Fertile" days - the time of the cycle when pregnancy can occur. Due to the fact that spermatozoa remain in the female body for several days, they can “wait” for an egg. Therefore, “fertile” days are considered the day of ovulation and 5 days before it.

A woman planning a pregnancy will definitely take care of determining the optimal day for conception in advance, using tests as the most affordable option. Let's look at what it is, how it works and what the ovulation test says, the weak second strip of which is visible after the study.

How ovulation tests work

First you need to carefully read the instructions, then any lady will be able to carry out such a procedure and evaluate the results obtained by the color of the strips, which is achieved by the action of a special reagent. Now let's figure out how it works and what the ovulation test shows at different times and what a weak second strip means: whether the cell is out or not yet.

Coloring the second strip

We remember that ovulation is the time of rupture of the follicle and the release of the egg, which matures throughout the first phase in the ovary, until it reaches the size provided by nature. Having broken through the membrane, she rushes into the fallopian tube for the purpose of fertilization. Such a gap is accompanied by the release of LH (luteinizing hormone) into the blood, and a jump in its level proves the release of the cell. The test strip impregnated with a special substance just shows this increase by changing the shade, which confirms the event.

Best days for testing

In order not to worry that the ovulation test showed a weak second strip, you need to choose the right time for testing and sampling, as well as follow certain rules. Almost all ladies know that the cell is released almost in the middle of a regular process, which is calculated in the number of days between periods. A cyclic process of 28 days is considered ideal, but fluctuations from 21 to 35 days are possible.

Ovulation is between phases, and only the first can change its value, because the growth of the follicle can occur at different speeds, and the second is constant and lasts 14 days. Based on this, a formula was found that determines the desired day for the cell to exit - 14 is subtracted from the length of the cycle. Since this procedure usually lasts 1-2, maximum 3 days, 3 is added to 14, we get the number 17, it is this that must be subtracted from the duration of the rhythmic period to calculate the first day of testing.

Analysis rules

Having done an ovulation test and received a weak second strip, it is impossible to say for sure whether ovulation will occur in the near future. For greater reliability, it must be carried out over the next 5 days, and possibly twice a day and not make mistakes during probing, strictly following the instructions:

Collect liquid in a container.
Lower the test into it to the indicated mark and hold for 5 seconds.
Set aside for 5-10 minutes.
Check result.

A clear line similar to the control or even brighter indicates a positive result. The release of LH is fixed, which means that the moment for conception has come. If, evaluating the answer, we see a weak second strip on the ovulation test, when to wait for ovulation will be prompted by repeated studies in the following days, since at the moment the LH level is still low. To prevent artificial distortion of the result, you should remember the rules:

do not take a sample of the morning portion of urine immediately after sleep;
take advantage of the time period from 10 to 20 hours;
do not drink liquid for a couple of hours before sampling;
do not urinate for 2-4 hours;
collect material for research and carry out the procedure at the same hours daily.

Evaluation of the received answer - what does the weak bar indicate

It is necessary to analyze the result according to the drawings in the instructions. To understand what a weak second ovulation test line means, the photos on the package will help if you compare your readings with the proposed samples. Most often, you just need to repeat the test. But if no changes occur, the girl's LH concentration is probably below normal and this result is positive.

No or weak staining of the control strip

The absence of a control line, or both, indicates that the test was performed incorrectly or that the test is of poor quality. The reasons for the distortion of the result are:

the woman is taking hormonal medications:
hormonal imbalance:
not enough time was kept during testing;
defective test or violation of the rules for its storage:
violation of instructions.

Additional factors

The following can also affect the final indicators:

stressful situation;
travel to exotic countries and change of residence;
weight change;
gynecological and inflammatory diseases.

Individual characteristics

Individual characteristics also play a role. In the body, luteinizing hormone is constantly present in small quantities, so a barely noticeable line should always be visible. During the release of the egg, it is clear and bright, and if you do an ovulation test later, a faint second line after ovulation will also be distinguishable. Another pale line can be if there are violations in the development of the follicle. He was not mature enough or could not burst, or the egg was released ahead of time. This mechanism in the childbearing function of a woman is unchanged and always follows the same path:

After menstruation, follicles form.
The cell matures.
The wall bursts, the cell moves to the uterus.

Samples do not show the process of releasing the female cell itself, but only the release of a hormone that stimulates this phenomenon. So a weak second ovulation test line for several days in a row indicates either a not yet elevated LH level and the tests need to be repeated, or this is an individual feature and ovulation occurs at this hormone value, or maybe it does not exist at all in this cycle.

Similarly, a high content of luteinizing hormone does not necessarily mean that the cell is ready. Sometimes, the desire to get a positive result can play a cruel joke, because subconsciously, all the time, thinking about the problem, a woman provokes a false result. It must be remembered that the nervous state affects the performance.

Interesting ovulation test:

conclusions

An ovulation test - a weak second strip can mean both a positive result with a low LH content in a girl, and a negative result or poor quality of the test itself. In any case, it is necessary to properly understand the instructions for using the test and strictly follow the recommendations for use in order to achieve reliable results.

If a woman dreams of a baby, then she probably knows what ovulation is and how to determine the moment of its onset. What is weak ovulation? Below is more about this.

Weak ovulation: can it be?

So, for starters, let's figure out what ovulation is in general. In the ovaries after the end of menstruation, follicles begin to mature. These are the vesicles inside which the maturation of the egg occurs. At a certain point, the follicle ruptures, and a mature egg comes out of it, which moves into the uterine cavity. If a spermatozoon enters the uterus, then fertilization will occur, a new life will begin to develop, and after 9 months a baby will be born.

And can it be weak ovulation? In fact, this is impossible. You either have ovulation or you don't. For example, if the egg is not mature, then it is clear that it will not be ready for fertilization. In addition, the follicle probably did not mature and burst. There can be many reasons for such phenomena: stress, illness of a woman, hormonal imbalances, changes in body weight, climate change, poor nutrition, strong physical exertion. So in order for a woman to eat right, take care of her health, lead a healthy lifestyle, not be nervous and regularly see a gynecologist. BUT weak ovulation impossible.

So what do most women mean? What means " weak ovulation"? Most likely, it is not so much the inferiority and insufficiency of this phenomenon that is implied (this cannot be, as already written above), but faint line on ovulation test. And this is quite possible.

Weak line on the ovulation test: what is the reason?

So, a woman who wants to know when conception can occur, probably does ovulation tests regularly. What is this test based on? The fact is that during the period of maturation of the egg in the body of a woman, a large amount of luteinizing hormone begins to be released ( LH ). And this very outburst captures the test by analyzing urine or saliva thanks to a special sensitive reagent that gives a signal that the amount LH increased.

So for what reasons can the second strip be weak?

1. The test was done incorrectly. So, you need to start doing it about 17 days before the expected date of the onset of menstruation, every day at the same time, preferably from 10 am to 8 pm. In addition, 2-3 hours before the procedure, you should try not to drink, and also refrain from urinating. But early morning urine is best not to use. So if the rules are not followed, then the strip may be weak, such a result cannot be considered reliable. For example, even if a woman drank a large amount of liquid, the concentration of the hormone in the urine will decrease, the strip will become dim.

2. If a woman takes some hormonal drugs, then this will also certainly affect the accuracy of the result.

3. If the test was stored incorrectly or the packaging was opened, the results will not be reliable.

4. If the second strip is weak, then this may indicate that ovulation will come soon or has already passed.

5. Some women have a hormone LH always contained either in an increased or reduced amount. In this case, doing an ovulation test is pointless.

6. With any hormonal disorders, the test results may be unreliable.

7. Poor quality test (for example, with a small amount of reagent).

It remains only to wish all women who are waiting for ovulation and dreaming of getting pregnant a bright and clear strip on the test and a speedy pregnancy!